General :: Phone Won't Boot Into ClockWorkMod
May 22, 2013
I recently downloaded and flashed my Qmobile A10 with this ROM URL....
And after flashing it I had a RAVEN ROM first which was getting stuck at boot logo. Even after the flashing I get to see the RAVEN ROM boot logo and then I see the Canvas(The ROM I installed) boot animation. Problem is that I don't get signals. They keep dropping.Further more I don't get to go to recovery again. Everytime I try it just factory resets the mobile.I tried going to Recovery mode by:
1) Holding Vol UP + Vol Down + Power Button > Vol Up
2) Mobile Uncle Tools again
3) ROM Manager
4) Terminal Emulator
5) Some flashbit.bat file I found for my phone
6) SP Flash Tools
All give the same result that my phone is factory reset. Except SP Flash, even after installing drivers it prompts that the drivers may not be installed and a USB error 8100.
View 3 Replies
Oct 11, 2011
I'm on a Galaxy S2 running Gingerbread 2.3.4, my baseband version is I9100XXKI1 and my kernel version is 2.6.35.7-I9100XWKH4-CL487028root@DELL136 #2
Using Odin3 v1.85 and S2 Root. (Superoneclick kept freezing on me)
My aim is to install Cyanogenmod 7.1.
So far I started off by trying to flash it with XWKDD Insecure, which I believe is wrong? However after rooting it, I installed ClockworkMod Recovery, downloaded the ROM and tried installing it - which is where the problem started - I kept getting the error in recovery mode 'Invalid whole-file signature'.
It just wouldn't boot in to ClockworkMod Recovery.
So after some digging around I managed to find a file to flash to my device for the CWM Recovery mode, tried it, and it worked. However, I still couldn't install Cyanogenmod from my SDcard.
I tried it a few times, wiped/formatted a few times and ended up getting my device stuck in a bootloop.
So, I've managed to get it out of the boot loop, and started fresh...
I flashed it with XWKH4 Insecure, unrooted, rerooted etc.
I've downloaded CWM again, downloaded the Cyanogenmod again, tried installing it, and once again it's gone back into Androids recovery and failed to install because of the 'whole-file signature' and failing to verify it.
I did post this in Q&A as well, however it doesn't seem to be as popular a forum as this one, I'm not really looking to wait for days for a response.
View 9 Replies
View Related
Aug 7, 2011
I am running an HD2 with MccMBoxmaxX Android V9 on SD. I boot into Android with magldr.
Windows Mobile 7 is in NAND.
I have used the cooked in Rom Manager to install ClockworkMod Recovery.
However, when I boot into magldr and try to run "AD Recovery" I get the "No Boot Source" error message.
View 1 Replies
View Related
Jan 25, 2013
My stats:
LG L35g Optimus Logic from Net10
Running Android 2.3.6
It is rooted.
Clockworkmod 5.8.4.5
Okay, first off this is totally my fault that this phone is stuck.
I was inside the About menu of android and saw there was an update for 2.3.6
So, stupidly, I decided to select it. It downloaded the update, rebooted, and then wound up at the clockworkmod recovery screen.
I tried the "reboot system now" option, but it just reboots back to the recovery screen.
I have used the "wiped data/factory reset" option. I've wiped the cache partition and Dalvik cache.
I didn't backup the stock rom, so I found these two roms for the l35g from here:
AA51
Stock (user modded version)
I used the restore option in recovery mode, but the "Stock" rom above didn't take. The AA51 rom did install fully and told me to reboot. I did, but it still went right back into the boot-loop!
I think the solution to this is to fix the boot-loop issue. Would Zengarden or Xionia work? Then, if so, I need a version of it to work with the l35g.
View 1 Replies
View Related
Aug 30, 2010
New to the whole rooting thing...
I was able to (i think) root w unrevoked3 and then unrevoked forever. I then installed the leaked 2.2. If I remember correctly, i had to root again after the leak.
Now, when I go to try to remove bloatware, by booting into clockwork and using adb, it wont let me in clockwork mod. I get the battery symbol thing with the exclamation mark.
I have S-off.
Should I re-root, is that the problem? What else could it be?
I also installed ROM manager, and it states that superuser was not found at "/system/xbin/su".
Should I assume that the update killed my root and I need to do it again?
View 9 Replies
View Related
Oct 14, 2010
So I recently flashed a ROM (Bionix 1.9 if it makes a difference), but now, anytime I try to go into ClockworkMod for any reason, it gives me an error saying "cannot open /cache/update.zip" and loads up stock recovery instead. When I look at that directory using Root Explorer, there isn't an update.zip in there. Can I just get this update.zip from someone who has clockworkmod working and stick that in there?
View 11 Replies
View Related
Apr 28, 2014
So I just flashed CyanogenMod 11 on LG G2 and forgotbto flash GApps on my phone and when I try folowwing CyanogenMod steps to booting into recovery mode it won't and it just boots back into the operating system. I think Clockworkmod got deleted when I flashed the operating system. So I can't install it without gapps and I need my apps.
View 3 Replies
View Related
Jun 24, 2010
I recently rooted my Motorola Droid and I am trying to run Rom Manager by clockworkmod and when i attempt to Flash Clockworkmod Recovery I get an error saying, "An error occurred while attempting to run privileged commands!" Can someone offer me some help on what to do, I have tried uninstalling and turning the phone off.
View 20 Replies
View Related
Aug 15, 2010
Given that we have s-off, is it now possible to update clockworkmod from the phone itself rather than having to use unrevoked? if so, how?
View 7 Replies
View Related
May 4, 2014
I just did a system update on my phone this weekend and found that after the update the phone will not boot, I have tried everything to get it to boot but it just won't boot, I have also attempted to plug it into my computer to re-install the OS but the computer won't recognize it as it doesn't fully load the OS.
View 1 Replies
View Related
Apr 20, 2014
I rooted my Samsung Galaxy S4 (SCH-I545), then I decided to install a custom ROM since the default TouchWiz rom is slower than a turtle stuck in a pile of wax. I installed Safestrap 3.71 (TWRP v2.6.3.1) and by mistake flashed my stock rom. Now my phone won't boot into any ROM since that is corrupt, but it still boots into recovery (that's a good thing I suppose). I have tried a number of Safestrap compatible roms (omni, cm, beanstalk) but they either end up giving me a black screen or a very weird looking pixelated blue/cyan screen. I have to remove the battery to reboot my phone. I tried using adb to wipe the data aswell but nothing works beyond recovery. I have to rely on adb to push and pull data to and from the phone.
View 4 Replies
View Related
Jul 23, 2012
When i connect to charger, it show this i cannot boot when long press power button
when i unplug, cannot boot also
i used a battery fully charged from battery charger still no use
View 3 Replies
View Related
Oct 26, 2012
The phone will not boot up.Tryed to go to download mode ( doesnt work )
tryed to connect to PC doesnt work
When i go to fastboot mode , on the PC is only fastboot gadget located in devices and printers. can't do anythink with it.I am using win7 x64 ultimate.Also the recovery mode doesnt work it always shows some Yellow triangle with a phone and nothink happens.
Link to the phone: "ahappydeal. com/ product-94000.html" without quotes and backspace
View 4 Replies
View Related
Nov 16, 2012
I write because I have a problem with a gt-i5800, the phone will not boot, the pc does not recognize the phone, I've installed the firmware Kirillos for recovery, but the phone never gets started, always goes into recovery mode, loop constant.
I read somewhere that you have to flash the bootloader but I also odin recognizes the phone, then I would get him through the recovery. The file should be in. Zip.
View 8 Replies
View Related
Feb 4, 2012
I have a rooted HTC Desire s, I did a software update through "phone, info, check for updates",(android 2.3.5 sense 3.0) now my phone wont boot, it's stuck on the HTC boot screen., I've tried updating from SD card (various custom stock roms) but I always get an error message.
Phone info:
-Revolutionary-
SAGA PUT SHIP S-OFF RL
HOOT-6. 98.1002
RADIO-38.02.00.11_M
eMMC-boot
Mar 10 2011, 14:58:38
View 9 Replies
View Related
Mar 10, 2013
I just tried to install an custom rom at my Android, i unlocked it on HTCdev`s site, but i think i was a little fast with the DooMLoRD_v2_ROOT-zergRush-busybox-su.zip
I then bootet the phone into fastboot, and did the command fastboot flash boot boot.img, this worked very fine but now the phone wont boot.
I think maybe the phone is unlocked, but it is S-ON. I have tried diffrent recovery modes with the fastboot flash recovery recovery.img etc, but none of them are working.
Now im sitting with a phone that wont boot at all, what to do?
Is it possible to keep going on with the custom rom install, or can i resett the phone into the stock rom?
View 3 Replies
View Related
Oct 4, 2012
I try to understand android boot sequence on my JB (under CM10). I found some docs and there should be specific partitions (boot, recovery, system, cache, data).
My understanding of the boot sequence is now:
A) normal boot:
1) Power ON ->
2) bootloader ->
3) boot-partition where i flashed the kernel aka boot.img ->
4a) system-partition with the OS (libs, UI, etc) where i unpacked over CWM my customROM.zip ->
4b) data-partition, where i unpacked google-apps.zip and installed all the apps ->
4c) cache-partition with user data
B) recovery boot (adb reboot recovery):
1) Power ON ->
2) bootloader ->
3) recovery-partition with CWM where i may unpack all the .zip stuff to proper partitions, or restore from sdcard, etc.
Is this correct? I wonder, because i didn't installed CWM into recovery-partition. It cames from install of CM10 (fastboot -i 0xfce flash boot boot.img), so it must be in boot-partition and not in recovery?
So, next confusion: i looked up to /proc/mtd and i don't see neither boot nor recovery partition here:
Quote:
# cat /proc/mtd
dev: size erasesize name
mtd0: 19000000 00040000 "system"
mtd1: 00600000 00040000 "appslog"
mtd2: 06580000 00040000 "cache"
mtd3: 1a400000 00040000 "userdata"
I did a backup with CWM and loocked the data. There aren't boot, and recovery backups:
Quote:
# ls -lha /sdcard/clockworkmod/backup/2012-10-04.18.49.55/
d---rwxr-x 2 system sdcard_r 4.0K Oct 4 18:56 .
d---rwxr-x 3 system sdcard_r 4.0K Oct 4 18:49 ..
----rwxr-x 1 system sdcard_r 1.6K Oct 4 18:54 .android_secure.vfat.dup
----rwxr-x 1 system sdcard_r 54.6M Oct 4 18:55 cache.yaffs2.img
----rwxr-x 1 system sdcard_r 360.2M Oct 4 18:53 data.yaffs2.img
----rwxr-x 1 system sdcard_r 212 Oct 4 18:56 nandroid.md5
----rwxr-x 1 system sdcard_r 214.6M Oct 4 18:51 system.yaffs2.img
#
So, i think i didn't understand the boot sequence and partition schema corectly.
View 2 Replies
View Related
Sep 12, 2013
I am trying to do some low level performance testing related to device processor cores through adb which I feel it is affected by Android background services and system stuff.
As I know that the Android boot sequence stages are as follow:
1.Execute Boot ROM code.
2.Execute the boot loader.
3.Load the Linux kernel.
4.Launch Zygote, which initializes the Dalvik VM.
5.System server which loads the Android system.
So my question is how can I interrupt this sequence to force it stop on stage 3 to load Linux kernel. This can implement my intermediary performance testings before loading again Android system.
Does Fastboot or Clockworkmod recovery can load my device to a kind of Linux kernel?
View 2 Replies
View Related
May 10, 2014
I have a ~1.5 year old Samsung Galaxy S3 (North American) rooted, with Cyanogenmod 11 installed.
Ever since installing CM11, my phone has been restarting itself with some regularity.
Today, with over half the battery left, the phone seemingly turned itself off. I do not believe this is an issue with the cyanogenmod OS and I also don't believe the issue is related to the restarting I've been experiencing. These restarts, in the vast majority of occasions, started with a brief freeze, then screen turning off, before the phone automatically starting up again. However, this time, the phone did not freeze before the screen went black, and the phone did not restart itself. I repeatedly tried pressing the power button to unlock, and when that didn't work, I tried long-pressing to either turn the phone off or back on. When that also failed to work, I pulled the battery, and put it back in. The Samsung logo came up, and then the Galaxy S3 logo with the Cyanogenmod logo came up, then the screen went black again.
And this is where I'm at currently. After the screen goes black, I can't get it to come back on. Long pressing the power button does not turn it back on. Only when I pull the battery and put it back in, does the boot process start. Every time, during the first few seconds of the boot process, the phone turns itself off. Sometimes it only lasts until the Samsung logo, sometimes to the GS3/CM logo.
If I plug the phone in, with the battery inserted, I briefly see a battery on the screen, but again, the phone shuts down.
If I plug the phone in, with the battery out, the LED turns red, the phone vibrates, but nothing happens, and the LED goes out.
I've read about power buttons getting stuck, but this doesn't seem to be the issues since my phone does not go into a boot loop sequence.
I've tried leaving the battery out for an hour or so, but there is no change.
I've also tried pressing power+home+vol down and power+home+vol up, and they seem to work, until again, the phone shuts off. So one of these combinations leads me to warnings about changing OS before shutting down after about the same number of seconds, and the other leads me to the boot logo with the blue text on the top left corner before shutting down.
To me, this doesn't seem to be an issue with software, but with the phone staying powered..somehow.
View 24 Replies
View Related
Oct 22, 2012
I've been trying to track down a solution to my problem, but every solution seems to contain a "Boot into recovery mode" line which I cannot do. I attempted to update a rom that I had installed, and now I am stuck at the google logo with the unlock icon. I cannot boot into recovery with the volume keys and power, and now I cannot figure out how to use adb to recover the phone, as it cannot recognize it.
Is there anyway I can access this phone while it is in this state from my computer and recover it somehow. I tried following leads that people have posted in other threads, but it seems like most suggestions involve "Use adb", yet every adb tutorial involves the phone being in recovery mode. I've tried to uninstall and reinstall drivers via Wug's Toolkit, but when I plug my phone in, I am not able to install the drivers properly. I try to run adb items through the console, yet it does not recognize my device.
Is there anyway to install the necessary software I need and recover my phone while I cannot get past the google logo screen?
I am using a verizon galaxy nexus
View 4 Replies
View Related
Dec 14, 2012
I'm currently running Cyda's Stock+ ROM on my Ascend G300. I installed this Volume+ and set the incall volume steps to 100 and rebooted and now my phone won't boot and is stuck in the booting animation. [URL]
View 1 Replies
View Related
Jan 2, 2014
I have a new quad-core phone with android 4.2.1, that is now useless. It can not boot, it freeze at second bootlogo, before animation.It is rooted, and i have made some changes to build.prop. It worked fine, but after some time i realized the gallery and camera app was gone.
Then i did following:
Installed updated standard gallery+camera apk found online, both in the same app. from here [URL] Works great, but i wanted to make it a system app, so did that with titanium backup.After that, the camera app is gone. Gallery app is still working.So i tried to change it back to user app, again with titanium, but did not stop working. After some time i took out the battery.Now it freeze before boot animation.
I tried "wipe data/factory reset" and "wipe cache partition", in system recovery but still not booting!
I tried to backup user data from another phone, same model, and restore on this one but says "Error: checksum compare fail".
Do i need to flash a new rom to the phone with my pc? I have not tried this before, and i want to keep stock rom.I have read this page:
[URL]
But i can not get it in download mode, with those hotkeys?
i have access to other working phones of the same model.
View 9 Replies
View Related
Jul 25, 2012
my phone is fully charged but cannot boot
it showns this symbol when charing when i unplug,cannot boot
i cant even boot so cannot go into recovery
View 1 Replies
View Related
Apr 30, 2012
I was removing stock apps from my /system/app folder, and deleted Launcher2.apk by mistake. The phone couldn't boot properly, so I managed to get the apk from the emulator and install it using adb booting the phone on recovery mode.
Now, my problem is, that Launcher only shows shorcuts to the apps from my /system/app folder. Every apk I put or install on /data/app doesn't apear on the apps view. So there is no way to launch any app unles I manualy move it to system.
I think launcher must read a config file to get the installed apps, and it's failing for some reason. What do you think?
View 1 Replies
View Related
Mar 5, 2012
I have a six month old Epic 4G, rooted, CWM recovery,. I used Root Uninstaller to remove three of the annoying preloaded apps that I never use. Otherwise, my phone is stock. I'm still on the 2nd to last Gingerbread update, as the one that arrived in late Jan won't apply to my rooted phone. I doubt my problem is specific to the device, though, which is why I'm posting here. I have a 32GB SD connected to the phone.
The problem: I have a very irritating "warm reboot:"
1) After booting, the phone is sometimes (not always) extremely laggy. When I use a system monitor to see what is taking the CPU, it appears to be "System" that is taking all the CPU. If the phone is not obviously laggy when starting up, this problem does not occur.
2) The flash card scans always say they complete. It never reboots before these complete.
3) Although the flash scans have completed, it takes quite a while for all of my app icons to load, suggesting it is still going through the SD card.
4) Within a few minutes after booting, the screen goes black and the four soft keys light up. If the screen is already off when this happens, the screen first turns on briefly, and then goes black!
5) About five to fifteen seconds later, the GUI restarts and it starts scanning the flash.
What else I notice:
* The "uptime" reported is not reset, which tells me there was no actual "reboot."
* Once I can get it to boot without doing this, it's stable for days.
* Using the phone right after it boots seems to increase the chance of this happening, but it's hard to say.
* In the past, if I disabled WiFi and 4G and then went into airplane mode, this would greatly reduce the chance of this happening, but now my phone has been constantly warm rebooting even in airplane mode. The phone appears to be getting less stable with time.
* This does not appear to be correlated with phone temperature. The phone can be cool to the touch or warm to the touch and this will happen.
* I've tried wiping all the various caches before. Makes no difference.
Questions:
1) Is this a known issue that is not present in a 3rd party ROM?
2) Does moving a lot of apps to SD cause this? With only 1/2 GB of built-in app memory, I have no choice but to move almost everything to the SD.
3) Does having a LOT of files on the SD card cause this? I have many nandroid backups on the SD.
4) Is there a real name for this "reboot" that I can Google for? When I search for "reboot loop" or "warm reboot" I get unrelated failures. I saw one thread where someone mentioned a "sense reboot" but that seems to be an HTC thing?
5) If I clear off the SD card, or somehow signal that most directories are not to be scanned, will this make a difference?
6) How can I figure out what is going on, why the phone is restarting the UI? Does Android have a boot-up problem of being at 100% CPU for a few minutes that automatically causes a UI reset? As I said, once the phone boots without doing this warm boot, it will be stable for days.
View 3 Replies
View Related
Jun 13, 2012
Instead of seeing the boring old Android logo or my service provider's logo, I'd love to see the standard text-based Linux boot screen that shows the status of all the hardware and configuration info as my phone boots. My current phone is an HTC EVO 3D running Cool ICS with Sense 3.6 and Revolutionary CWM.
View 2 Replies
View Related
May 12, 2012
I need go to the FastBoot menu becouse i need change the splash screen - boot image (bootlogo)
If i push + / - / power buttons, always i will go to the ClockWorkMode.
Huawei sonic U8650
Android 2.3.5
Root
ClockWorkMod
OC Kernel
View 9 Replies
View Related
Jul 29, 2012
I'm using micromax A73 and trying to flash recovery mode on it. I have appropriate .img file of clockworkmod with me. I tried to flash it using androidforums.com's sp flash tool method..
But its showing some error on SP flash tool.. (snaps attached). I tried bot a75 drivers and official a73 drivers. But no use. how should i flash this clockworkmod.. Is there any other method to flash?
View 2 Replies
View Related
Mar 1, 2013
I tried to port my Micromax A57 [Base] with Karrban A5 [used for port]. When I installing everything works great but, it stuck at boot. How do i check where is the fault or is there anything to do ?
View 2 Replies
View Related
Nov 17, 2013
yesterday, I flashed Modaco Switch for HTC One when my battery is low (20%). Now it wont let me pass the "HTC quietly brilliant" screen. I've searched the solution for hours and still, no luck on finding it out. But I see some thread that suggest me to download a new rom and put it in my SD Card, but I cant even pass the HTC boot up screen. Btw, I've relocked and unrooted my device.
View 2 Replies
View Related
