I recently installed cyanomod on my wildfire (buzz), but when my phone is on AC i can not turn the phone on. this can only be fixed by removing the battery and booting it without being connected to the net. Also,if i plug in the AC when the phone is turned off, the red led indicating the battery charging will won't turn off when i unplug the device.
View 1 Replies
I have recently rooted my Galaxy S3 and I wanted to install cyanogenmod. I used ROM manager to do so.
The problem is that as soon as I installed it, my phone supposedly rebooted but it never started up again!
Now all I get is a flashing "menu" and "back". I can't boot normally, or in download mode, or in odin mode.
I was trying to install CyanogenMod, but now it wont boot. It's just boot with a 'circle'logo, and nothing happends.
Please see my video on youtube: [URL]...
Is there anyway I can get back to get my phone back to working again? I have tried to hold down VOLUME UP and Powerbutton with USB-cable in, but still the circle-logo
I installed Cyanogenmod 10.2 a few days ago, and has been working fine up until about an hour ago. My phone basically locked up while I was using Spotify, so I did a hard reboot, and got stuck in a boot loop. I tried to reboot a few times with the same results. I didnt have much on my phone, so I did the factory reset (using Teamwin recovery), but after that the phone was still stuck in the boot loop. After that, I tried the "Format Data" option.
After going through, It was still stuck in the boot loop. I've also tried to restore backups, but to no avail. I'm not super knowledgeable about the whole inner workings of rooting. I didn't want to do the advance wipe (includes internal storage, system, USB-OTG) for fear of really messing something up. If it completely restores to factory settings, i don't really care, I just dont want my phone to be completely unuseable.
AT&T Samsung Galaxy S3
Can .zip bootanimations work on rooted wildfire s with stock Rom and that splashscreens also in .zip work or not and if so any cool splashscreen......
HTC Wildfire S A510e using xda premium
What's up everyone, I created a custom cyanogenmod themed boot animation the other day and thought I would share it with you.
Cyanogen Boot Animation
Screenshots and installation instructions are at the above url.
so i installed via rom manager. and i let it run its course ... then its nothing but the boot animation for 30 minutes until the battery died lol.
any ideas/suggestions?
I am using a rooted verizon LG G2. I rooted the device with ioroot 25 and installed TWRP 2.7.0.0 using AutoRec. (AutoRec - KitKat Recovery Installer - xda-developers, Here's a forum if you're unfamiliar with AutoRec)
Whenever I try to flash Cyanogenmod 11, TWRP says the flash is successful. I then go to reboot the device and I'm stuck in a boot loop of LG's logo. During the flash, TWRP mentioned that no MD5 file was found, which may or may not be related to the issue I'm having. During the bootloop, I booted back into recovery using the keys on the back of the phone and restored Stock LG KitKat. I've tried using multiple versions of CM 11, nightlies and snapshots. I'm stuck using TWRP 2.7.0.0 because AutoRec is one of the only methods I've had success with when installing a custom recovery.
So I did like this: I made a backup with myBackup. I reseted the phone to factory deafults. I launched it back and checked tethering - it was working fine, as it should. I restored my backup of apps and data, without phone settings. The tethering doesn't work anymore. Could there be an app which is disabling it and common to all of us having this problem?
I include list of my apps created with MyAppsList:
Quote:
When I hit the "phone" button on my HTC wildfire it brings up all my contacts on both my SIM card and in the phone memory. Is there anyway that I can see just the SIM card contacts as it shows up all of my contacts twice! When I hit the HTC people button it will just bring up a list of each contact only once, but this takes a few seconds to load.
View 5 Replies View RelatedI was wondering if there are any applications for free or cheap international SMS available for android (wildfire). I found a application with the name Free SMS in market but that doesn't work and get disconnected from Internet every time.
View 2 Replies View RelatedI bought myself the HTC Wildfire about a week back. I have a few questions regarding the wallpaper and the lock screen resolution.
The Wildfire screen resolution is 240x320. What should the ideal resolution be for my lock screen and wallpaper images?
When I set a 240x320 image as wallpaper or lock screen it appears very pixelated. However, when using resolutions of 640x480 and above, the wallpaper looks great but the lock screen is still pixelated. Also, when selecting the lock screen image I can't select the whole thing. Parts always get cropped.
Somehow the HTC backgrounds that are present on the phone don't look as pixelated although they are of a lower resolution.
I bought an HTC Wildfire. And I cant turn its internet sharing option on . I also did download and install drivers and applications of htc from htc official site.
View 5 Replies View RelatedWould like to enable repeat notifications on the wildfire so if i've missed a text /email i'll get more than the one notification sound.Is this possible ?
View 1 Replies View RelatedI was looking for the case in the subject
but for the htc wildfire any idea ?
I already own one for the htc desire and it's great, I've bought from mobilefun
I try to understand android boot sequence on my JB (under CM10). I found some docs and there should be specific partitions (boot, recovery, system, cache, data).
My understanding of the boot sequence is now:
A) normal boot:
1) Power ON ->
2) bootloader ->
3) boot-partition where i flashed the kernel aka boot.img ->
4a) system-partition with the OS (libs, UI, etc) where i unpacked over CWM my customROM.zip ->
4b) data-partition, where i unpacked google-apps.zip and installed all the apps ->
4c) cache-partition with user data
B) recovery boot (adb reboot recovery):
1) Power ON ->
2) bootloader ->
3) recovery-partition with CWM where i may unpack all the .zip stuff to proper partitions, or restore from sdcard, etc.
Is this correct? I wonder, because i didn't installed CWM into recovery-partition. It cames from install of CM10 (fastboot -i 0xfce flash boot boot.img), so it must be in boot-partition and not in recovery?
So, next confusion: i looked up to /proc/mtd and i don't see neither boot nor recovery partition here:
Quote:
# cat /proc/mtd
dev: size erasesize name
mtd0: 19000000 00040000 "system"
mtd1: 00600000 00040000 "appslog"
mtd2: 06580000 00040000 "cache"
mtd3: 1a400000 00040000 "userdata"
I did a backup with CWM and loocked the data. There aren't boot, and recovery backups:
Quote:
# ls -lha /sdcard/clockworkmod/backup/2012-10-04.18.49.55/
d---rwxr-x 2 system sdcard_r 4.0K Oct 4 18:56 .
d---rwxr-x 3 system sdcard_r 4.0K Oct 4 18:49 ..
----rwxr-x 1 system sdcard_r 1.6K Oct 4 18:54 .android_secure.vfat.dup
----rwxr-x 1 system sdcard_r 54.6M Oct 4 18:55 cache.yaffs2.img
----rwxr-x 1 system sdcard_r 360.2M Oct 4 18:53 data.yaffs2.img
----rwxr-x 1 system sdcard_r 212 Oct 4 18:56 nandroid.md5
----rwxr-x 1 system sdcard_r 214.6M Oct 4 18:51 system.yaffs2.img
#
So, i think i didn't understand the boot sequence and partition schema corectly.
I am trying to do some low level performance testing related to device processor cores through adb which I feel it is affected by Android background services and system stuff.
As I know that the Android boot sequence stages are as follow:
1.Execute Boot ROM code.
2.Execute the boot loader.
3.Load the Linux kernel.
4.Launch Zygote, which initializes the Dalvik VM.
5.System server which loads the Android system.
So my question is how can I interrupt this sequence to force it stop on stage 3 to load Linux kernel. This can implement my intermediary performance testings before loading again Android system.
Does Fastboot or Clockworkmod recovery can load my device to a kind of Linux kernel?
Instead of seeing the boring old Android logo or my service provider's logo, I'd love to see the standard text-based Linux boot screen that shows the status of all the hardware and configuration info as my phone boots. My current phone is an HTC EVO 3D running Cool ICS with Sense 3.6 and Revolutionary CWM.
View 2 Replies View RelatedI have a 1 day old wildfire and have an annoying problem with my apps and widgets disappearing from the main screens. The apps and widgets that go are the one I put on it myself. It then replaces them with the one that are on the phone from new.
View 2 Replies View RelatedHope I haven't missed anything obvious, had wildfire for about a week, all ok.Now suddenly, I can only connect either my laptop or wildfire to wifi, not both at the same time, only started happening a couple of days ago.can anyone help please?
View 3 Replies View RelatedI have an unbranded HTC Wildfire, but it doesn't download any firmware updates. At the moment my software number is 1.14.110.1 and I know that there's an update to 1.25.405.1. But when I want to check for Software updates it says that there are none. What might be the problem?
Is it possible that the phone is still branded but without a sim-lock? Because I get T-Mobile start up screen,but use whole other SIM and there's no T-Mobile in the country i'm from.
what's the best video format to use on the Wildfire? I have successfully used 3GP, but, the quality isn't that good.According to the official HTC website, it supports MP4 and WMV, I tried converting an .avi to MP4 using OJO Soft Total Video converter, transferred it to phone, it shows up in the Gallery, but, when I try to play it, it just displays a static picture and plays the audio. Also, the only way to put it off, is to take the battery out as the phone totally freezes!
View 3 Replies View RelatedDoes anyone know a way to get all the birthdays that are listed under people to show on the calendar......i know if i sync to FB i can get all the birthdays from there but only want the people on my contacts birthdays?
View 5 Replies View Related1st i was thinking abwt buyin the wildfire simfree/payg at Three or Phones4u so itd cost be me about 200.
But then i started browsing different contracts, and found a 10/15 a month 24m cntracts, with reasonable packages
So at the end of 24 months, either by buying for simfree or doin contract it'd cost me similar amount of money..
So im not sure what to do? what do you think would be the best option and cheaper? what have u got? and if no then what would u do if u wer in my position ?
I have a nokia bluetooth car kit that supports voice dialing, my ancient nokia 6230i had voice dialing and I miss it on my wildfire. I see from some other threads that this seems to be an issue. Has there been any update on voice dialing on the lastest wildfire or are there any apps that enable voice dialing?
View 1 Replies View Relatedafter 2 failed attempts of installing copilot on my wildfire im assuming its not compatible? On their website its not showing the wildfire but i guess thats because the phone is just released.Have sent them an email but while I wait on reply was wondering if anyone on the forum new otherwise? Btw this is my first android and im very much loving my new toy! Screen res is not a problem (previously had N86) although the camera is the only thing im disappointed with.
View 3 Replies View RelatedI am not happy with the sync thingy or it's attempt to use itunes. I wanted to get away from itunes/ Apple altogether.I have had a go at media monkey but it is a long way off filling my needs.But I have found Sony's Media Go.Media Go: Download - Sony Media Software and Services Inc.It is not perfect by a long shot but at least my Wildfire can use the playlists it creates and does a nice job on getting my podcasts in some kind of order.
The thing I miss most from my itunes/iphone setup is play count and ability to manage the correct placement of folders on the wildfire.Please can we have a discussion on your setup on this matter and what you peeps use for your media management.
port CyanogenMod rom or kernel for LG F260S.
View 1 Replies View RelatedWhere can I download Gapps for Cyanogenmod 10.2?
I already downloaded one but not synchronized to google account and not opened the market.
I noticed a file '/system/priv-app/CMS.apk' (url...) on the latest cm-11 nightly for mako.
I wonder what is it? I can't find an appropriate source code on CMs GitHub. Is this going to be a custom client library like Google Play Services? Why is there no source code on GitHub?