I tried downloading and installing froyo OTA tonight and it rebooted and a status bar showed up. After about a third of the way into it an "!" icon appeared and the phone instantly rebooted. Upon reboot i got a message saying System update failed!I'm running 2.1 rooted - but all bloatware etc i've kept. Also running LP. Do i need to unroot before updating? I haven't read anything that says I need to.
View 5 Replies
I have a rooted Desire with 2.1 OS and I want to update to 2.2 but when I check in About section for a software update first System Update Available is 1.21.405.2 . Ok until now. I supose the first thing is to do this update and after reboot when I'll check to new System Software Update a 2.2 will appear.
After I download 1.21.405.2 via Wifi phone starts backup process and then reboots in a black screen with green SYNC icon and a loading bar stop loading after a few seconds an another black screen with a BIG RED question mark appears and then phone reboots as usual but with no update Why can't update in order to pass next step: 2.2 OS update ?
Trying to ADB push and this is the error I get:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsLori>cd/
C:Documents and SettingsLori>cd C:Documents and SettingsLoriDesktopAndroid
SDKandroid-sdk-windowstools
C:Documents and SettingsLoriDesktopAndroidSDKandroid-sdk-windowstools>moun
t -oremount,rw -t yaffs2 /dev/block/mtdblock4 /system
'mount' is not recognized as an internal or external command,
operable program or batch file.
C:Documents and SettingsLoriDesktopAndroidSDKandroid-sdk-windowstools>rm/
system/app/Browser.odex
'rm' is not recognized as an internal or external command,
operable program or batch file.
C:Documents and SettingsLoriDesktopAndroidSDKandroid-sdk-windowstools>adb
push libmtwebcore.so /system/lib
failed to copy 'libmtwebcore.so' to '/system/lib/libmtwebcore.so': Read-only file system
C:Documents and SettingsLoriDesktopAndroidSDKandroid-sdk-windowstools>adb
push Browser.apk /system/app/Browser.apk
failed to copy 'Browser.apk' to '/system/app/Browser.apk': Read-only file system
C:Documents and SettingsLoriDesktopAndroidSDKandroid-sdk-windowstools>
right so the bottom buttons were working fine, but the next day, the back button takes me to the home screen :S so if im on facebook, press the back button, instead of going to the previous page. and i also set up the draw thing to unlock it, but as it was raining a little it said i entered it wrong too many times and asked for the google mail thing... but i really have no rememberence of making one, which is so ******* annyoying.
the only way ive found out to solve this problem is doin a phone software update, however as my bottom right button is working properly, everytime i hold it down to plug the phones usb, the phone just starts normally, so basically i cannot do the system update.
Well ive been searching the internet all day for others in my boat. Everywhere I look people who rooted there 2.1 did the Official OTA with no issues. I am not looking to root 2.2. All i want to do is get 2.2 OTA from verizon. I keep getting Failed to Update. I unfroze all the bloatware. what else do i need to do? right now i am trying to unroot using that one click program and that isnt working either.
View 1 Replies View RelatedI have the Super User Root, Wireless Tether and Titanium Backup on my Droid X. I wanted to update to 2.2 and once I download it and try to upload it, it keeps giving me an Update Failed notice. Is there anything I'm missing?
View 1 Replies View RelatedI have read a bunch of different posts and after installing almost* my bloatware that I removed it still doesn't update. The only thing I am missing is corporate directly. I checked the ape bundle, and that isn't in there.
*All but one program
Since the Facebook app update was released, I've tried to update it. It will download it, then say installing, then say installation failed. I have a rooted and themed DX, so I tried to even rename the facebook.apk to a backup, then install fresh from the market. The installation still fails.
View 3 Replies View RelatedFortunately, my phone is not bricked. I unrooted it by using the one-click app, downloaded and tried to install froyo but received an unkind error message. The Update failed to Install. I'm assuming I need to flash the phone back to factory? How do I go about doing this?
View 19 Replies View RelatedI just checked the system updates for giggles but it is saying that check for update was not available at this time. Try again later.Anyone else seeing this? I am just worried that it might be because I am rooted.
View 6 Replies View RelatedI plan to return to 2.1? on my Droid and was wondering if anyone knew of a way to get rid of the constant System-Update reminders?
Sluggishness, quirks, disappearing alarms (and being late for work), and now the Certificate problem so I can no longer use Touchdown with the company Server........ have me missing the last version something fierce.
The rules of this forum restrict me from fully conveying my hatred for the recent OTA update to my original Droid. I am fully stock, un-rooted.
Just got a 76.9MB system update notification, what would you like me to do?
View 9 Replies View RelatedI guess I'm one of the few that had glitches w/ the update. First the galery link on the front page didn't update and I kept getting "this application is not installed" error. I couldn't drag it over to the red waste basket...it kept changing back to gray and the faulty icon stayed on the main desktop. That evening while on hold to Verizon I "force fed" it by holding it over the waste basket longer, then added the new gallery app from the slider screen.
Also noted that the gold button on the r side no longer worked for the camera, it brings up a quick messaging screen instead. They determined the ONLY way to fix this is to reset the phone back to factory issue. Is there another way around this? Or if I have to, what's the best way to back up everything and keep track of the installed apps? I really don't want to reset the phone.
I don't know much more then that my friend has a stock x and he just pulled. He check the rest of his phone know.
View 7 Replies View RelatedJust got my X a couple days ago and want to make sure I have the latest system updates. I have tried several times, but when I do Settings/About Phone/System Update, it always says: "Check for update was not available at this time. Try again later." I interpret this to mean that the update facility is down or busy, but it could also be interpreted to mean that there is no update available because I have the latest. What does it actually mean? By the way, my firmware version is listed as "2.1 update1" - is that the latest?
View 3 Replies View RelatedI'm very new at this rooting stuff and I saw a lot of benefits from it so I thought I'd give it a try.
I've followed this guide and completed it:
14/Jun r6 riskfreeroot - HTC Desire rooting guide - now with HBOOT 0.80 and OS to 1.21 support - Android @ MoDaCo
I also did the custom recovery image part (although I don't know what it is used for)
And I didn't make a goldcar either because someone told me I didn't have to do that as I don't have a carrier.
But my problem is I can't change anything as cmd keeps giving this error when I enter adb shell:
- exec ' system bin sh' failed no such file or directory (2)
I'm in my phone recovery and my usb cable is plugged in. This is the screenshot: http://i46.tinypic.com/120j7tg.jpg
I am an Android app developer, and I have purchased a Nexus One device which I use to continuously test my developed Android applications.
Background: ----------------- One of the applications I developed uses a native shared library (e.g. myNativeLib.so). Only my application loads & uses this native library. I had developed this app before Android NDK came out. I pack my native library into my apk's 'assets' folder, and during my application start- up, I extract this native library from my package's assets folder to my app private directory (i.e. <assets> -> /data/data/<myappprocess>/ myNativeLib.so). Then I use System.load() API in my application to dynamically load this native library.
Problem: ------------ This application was developed during Android 1.5 (i.e. cupcake) days {I didn't have the Nexus One then}. The above procedure has been working without any problems right from Android 1.5 to Android 2.2 (i.e. Froyo). I have also tested the same on my Nexus One for Android 2.1 (i.e. Eclair) and Android 2.2.
The problem began the moment I recently upgraded my Nexus One to Android 2.2.1 via the FRG83 system update. Now, whenever I try to load my native library, I get the following error:
D/dalvikvm( 3653): Trying to load lib /data/data/<myappprocess>/ <mynativelib>.so <some address> I/dalvikvm( 3653): Unable to dlopen(/data/data/<myappprocess>/ <mynativelib>.so): Cannot load library: link_image[1995]: failed to link <mynativelib>.so
What I have Tried: -------------------------- 1. I tried my application using Android 2.2 SDK (emulator)...it works, no issues. 2. I checked out the latest froyo & android2.2.1 source code from Android open-source, built & tested my application + native lib using the latest froyo source...it built & ran, no issues. This should've taken care of any changes in the native code dependencies between Android 2.2 & Android 2.2.1 3. I even checked Android 2.2.1 source code for dalvik (java System & Runtime classes) + bionic (linker & dlopen sources) between Android 2.2 & Android 2.2.1 (using source checked out from Android open-source), but couldn't find anything consequential 4. I am unable to return my Nexus One to Android 2.2.
My droid razr was installing an automatic update, made an error and then failed ultimately. It happened over night, so I wasn't even paying attention to it. This morning it was stuck with no service, no data, nothing. I tried turning it off and then back on, putting airplane mode on and then off. No luck. I then did a factory reset. Now it just says "please wait, this may take a few minutes." It does not change. I waited as long as the batter would stay charged. Still nothing.
I also tried re activating it on the verizon wireless website. No luck.
My 4n is Samsung Galaxy y duos. Nomaly it has a 240MB System Space. I installed a custom rom (xDuos V3 2) with him guides. its fine. but I tried to get stock rom back. so i wiped all data ,system... n restore my old cmw backup.
But failed to restore. now my 4n has only 220mb space.
it failed due to low system space <as i think>
when i tried to turn on the tab it shown the msg failed to recover system system halted
View 4 Replies View RelatedI used System tuner to tweak a little on my Acer liquid gallant solo E350. I reduced the CPU frequency when the screen is off and changed the governor to ondemand with a minimal frequency of 500 [MHz]. nothing too special here.
A few days ago i did a one click backup with system tuner. Today i restored it because I saw my CPU frequency constancly being 1000[MHz]. After the backup on program after the other start to fail. Unfortunately i turned my phone off and now it won't boot anymore. I got suck at the green glowing acer screen. My idea is now to make an update file which replaces the system files.
My phone is not rooted. When I select check for system updates, it does everything normally, I select install now, the installing icon appears, loads half way and reboots. When it starts up again, I get a pop-up saying that the update failed! I repeated this process a few times and I give up. Is there any other way to update my milestone?
View 1 Replies View RelatedI have a rooted phone running the standard TMobile 1.4.8. I just checked for a system update and I selected to install the 1.5.2.2 update that was available OTA
However, my phone is now stuck at the Android Recovery screen because the error message is saying something about how it can't mount the T-Mobile.1.4.8.zip (not the full real filename) and installation was aborted. So when I choose to reboot the system and it loads up my phone... but only to have to self-reboot a few minutes later
pretty much, my phone is stuck in this endless loop of restarting because I choose to do the system update...
I have a X10 Mini which is an O2 Pay as you go purchased in England. I followed the Sony Erricsson instructions posted on youtube to upgrade my phone. After a fun filled few hours the other evening, and after rebooting the phone for a final time the phone was still at v1.6. The PC companion software downloded and appeared to update the phone correctly. Now if I try to repeat the upgrade process the PC companion says that the phone's software is up to date.
View 1 Replies View RelatedMy Motorola Backflip is just 2 days old. I am facing some issues regarding Android Keyboard and Dialer applications and the Update of the system.
Android keyboard :- application functions improperly on an intermittent basis.When I want to compose a message and I open the keyboard for typing the typed characters are recognized (I can see them popping up) nut in the input box nothing gets typed.
Dialer application - When I want to place a call and hit the Green Call button in left of Home button I face following issues
1) the application takes a few second to appear
2) when I double-click or press and hold the contact to call the desired number the call does not initiate.
Finally I had to restart my phone.In two days this has happened so many times.
Also I tried checking for updates may times.But it said "the device is unable to connect to the server.Try again later."
There are no issues with my Wireless network.I ran Marketplace application and signed into my Google account successfully.
Ok not sure where I'm going wrong. Here's everything I have done. Starting with stock DX
- Used UniversalRoot to gain root access
- Installed and ran Titanium Backup, backup saved to SDcard
- Reran UniversalRoot and unrooted
- Flashed with SBF, seemed successful but my user data was still intact
- Booted to stock system recovery, wiped data/factory reset & wipe cache
- apply sdcard:update.zip
E:signature verification failed Installation aborted
OTA owned me, it failed and RSDlite says the SBF is not compatable, does anyone have a clockwork recovery backup file for a clean 2.1?
View 7 Replies View RelatedI've been trying to go back to barebone 2.1. Im running 2.1 but have themes installed. I ran the fab theme killer and still have aspects of the last theme stil hanging out like the themed facebook and themed power control widgets. I tried to sbf flash it and failed.
View 6 Replies View RelatedLast night I did the check updates *#*#2432546#*#* and to my surprise a few minutes later a system update appeared. I was elated and accepted the download and restart. I am still waiting... I have the explanation mark and the little android guy on the front of the screen, but no restart. What do I do next? I am in a slightly weak area, but normally can get 3G and decent downloads. So now I am unsure how to proceed. Was the restart suppose to be automatic? That is what I was led to believe.
View 26 Replies View RelatedI am sitting here trying to get my phone back to the way it came out of the box. Now I rooted it a month or so back and cant remember how I did it. So I am reading along and doing all these methods and not one of them seemed to work for me. I think I am making some progress though. Before I used to have an app called super user. In the midst of all these things I was doing it is now gone. I formatted the sd card and put the factory original backup back on there.
But now I go to update (to 3.29.651.5) and it wont let me. When I click on the update it says it going to restart and then it takes me to the recovery screen saying that It has been aborted. It says.....
Build : RA-evo-v1.7.0.2
Finding update package...
Opening update package...
Verifying update package...
E: No signature (206 files)
E: Verification failed
Installation aborted
http://www.youtube.com/watch?v=4q2ioZyhcRQ