HTC Incredible :: Understanding Signal Strength?
Jun 14, 2010
Just downloaded "Real Signal" from the market and am trying to understand what the numbers mean. Tried searching here, no luck. Can someone point me to a good thread or a resource to help me understand what the #s mean? At home I get 2 bars and the battery lasts and lasts, at work I get 0 to 1 bar and the phone hunts for a signal, making the back of the phone very warm to the touch, eating battery like there's no tomorrow. I have it on 'airplane mode' right now but that sort of defeats the purpose of having it, might as well turn it OFF.
View 5 Replies
Nov 4, 2009
I want to reach out to others here before I take my Moment back to Best Buy to exchange it for another Moment.
My signal strength fluctuates wildly just sitting in the same spot. With the Hero I got a constant 5 of 6 bars, but the Moment will vary between 0 and 5 of 6 bars. But it's more complicated than that.
It seems that whenever the EVDO data kicks in, it causes the signal strength to drop to 0 or 1 bar. Once the data is idle, the EVDO indicator turns grey and then changes from EV(^v) to EV(D). At that point the single strength will return to 3 or 4 bars.
At times, though not as consistently or often, the EVDO connection will fall back to 1xRTT and will switch between them every few minutes. This will occur even when the signal strength bars are in the 3 to 4 range.
So, the my questions are...
Does the signal strength apply to the data signal or just the voice signal?
Is there any legitimate reason for the signal strength to vary wildly like I've described, even when sitting in the same recliner where the Hero had a constant 5 bar connection and data service that never wavered?
Is anyone else having signal strength and/or data service issues?
Should I exchange the Moment for another Moment or will I likely experience the same issue?
View 8 Replies
View Related
Jul 1, 2010
Not sure if this question has already been answered but will there ever be a fix to the signal strength issue?
View 1 Replies
View Related
Sep 1, 2010
I just updated to 2.2, but I noticed the Verizon network signal is weaker. I used to be able to use 3G connection at my desk at work, but after the update, I cannot receive any 3G signal at the same location. Does anyone have any idea?
View 12 Replies
View Related
Aug 9, 2010
As of this morning i seem to be sustaining 3 to 4 bars when last night at the same dbm i would only see 1 to 2 bars this happen for anyone else. im saying that the bars have gotten BETTER today not worse.
View 14 Replies
View Related
Apr 30, 2010
Is anyone else having problems with their 3G signal strength? I usually only have 1-2 bars and I was standing next to my co-worker who has an EnV and he had full service. I have even tried *228.
View 49 Replies
View Related
Jun 15, 2010
I have noticed where it is sometimes mentioned that on the Inc, they go to settings and somehow monitor the signal strength.... like -80 to -90, etc. I have looked and can't seem to find it. In fact, I have looked all through various wigets and programs and still haven't found anything concerning signal strength...
View 2 Replies
View Related
May 1, 2010
Would an OTA update fix this problem? And I'm not necessarily talking the one that was mentioned here today. I can live with the battery issue until the extended battery comes out. I love this phone and don't want to send it back but I really might have no other choice. What are the chances that some update will improve the issue or is it a hardware issue that might never get resolved?
Also, anyone know how long you have with a phone till you can not port your number? I've been using the phone with a new number and still have my ATT Bold active. I don't want to port my number till I am sure I will be keeping the Incredible.
View 32 Replies
View Related
May 2, 2010
I've had my Incredible since the 29th (yes, I had to wait) and it is been fantastic except for one important thing - call quality.I know everyone in here has been discussing signal strength and bars, but I've been experiencing very poor quality in calls. It only seems to be the audio I'm hearing (people on the other end say I sound fine) that is bad - with everything from little 1 second "scuffs" (sounds like someone blowing on the phone mic), to 1 second moments of silence while someone is talking, to what sounds like auto-tune on the person's voice. When there isn't distortion the person sounds kind of muffled. Many times even the audio of the ringing cuts out a couple times or sounds distorted when calling someone.Anyone on here experiencing a similar issue? I stopped by my local VZW store to which the technician didn't feel there was a problem and refused to replace my phone (although they had no new phones anyways). I've done a hard reset to remove any apps that may be interfering with the calls and it's still the same. Also have tested at least 50 calls in several areas of Rochester, NY (30ish mile radius) over the past 4 days.
View 49 Replies
View Related
May 8, 2010
What more can be said The Incredible meter is totally defective. This is what I got today. Also by popular demand direct Db readouts on both phones. Here is the proof the HTC battery bar meter is 110% DEFECTIVE!
View 24 Replies
View Related
May 7, 2010
With all the doom and gloom threads around here it makes one feel that the phone is a complete dud and no one is getting good signal strength. "If you hold the phone wrong your dBm signal strength drops by 20!" "The battery doesn't last through the day!" etc. etc.I know usually it's a "vocal minority" thing but the sheer volume of complaints on this forum is worrying me.Is anyone here having a more or less flawless experience with the Incredible as far as phone calls are concerned? I.e. are you getting good 3G reception as compared with prior phones you've had on VZW and so forth?I am really REALLY on the fence between the Incredible and the Motorola Droid and I don't want to regret getting the Inc if these problems are blown out of proportion.
View 49 Replies
View Related
May 25, 2010
My Dinc literally just rando-booted and when it started back up my signal strength jumped from 90dbm to 72dbm from 1-2 bars to 3-4! No idea what just happend but was curious to see if this happened to anyone else. BTW I'm in PHX, tempe area!
View 18 Replies
View Related
Sep 1, 2010
i'm beginning to think that in 2.2, if you have a lower signal strength (such as i do in my house), it can't tell your location anymore. in my house, wiht 2.1, it always told me my town. now, with 2.2, it says, fro the most part with a lower signal, "current location." however, when i turn wifi on, it'll tell me my town right away, leading me to believe that since my wifi signal is great in my house, it's giving me the correct location.
View 8 Replies
View Related
May 3, 2010
I work in a large building and getting the Internet is painful here (it comes but just takes awhile to load certain sites) is there anything I can do to improve signal strength when indoors?
Any certain antenna I can try or something?
View 4 Replies
View Related
May 5, 2010
We originally bought 5 for our business. Of those 5, 2 have been returned and exchanged for Blackberries. We continue to have terrible Signal Strength, and in 2 phones a very loud echo. All other little bugs aside, im looking for some answers. Since I didnt see any side by side tests, I thought I would
1. I tested the signal strength at 5 locations. All locations had great 3g speeds for all the phones. The first INC is an original phone, and the second INC is a replacement.
Droid Eris INC1 INC2
-75 -80 -98 -96
-85 -74 -101 -100...
My question is, how can i have GREAT 3g speeds with all the phones, yet have a terrible signal strength. I'm on my 2nd phone and still have the same issues. ( So its not a bad batch)
2. The first thing the other 2 users of the phones mentioned right out of the box there was a very defined echo. The echo was of their own voice, not the other person on the line. I've noticed it on and off, but nothing to bad. People also complain they can hear the echo, making us hard to hear on the phone. I really like the Incredible, but I guess unless someone from Verizon tells me to wait for an update, or someone here has a solution Im gonna have to go back to the Blackberry. Anyone else having the same problems?....
View 49 Replies
View Related
May 11, 2010
A poster said a week ago that basically putting one finger on the top left of your phone with a second on the lower left corner improves signal strength.
Well it works really well at my job (inside a big building) where I usually hover at 100db but using this method I get about 88-90db and adds 2 bars.
So my question is can I do something (or add something) that will duplicate that effect without having to hold my phone with a couple of fingers?
View 9 Replies
View Related
Jan 6, 2010
I'm writing an android application that collects cell signal strengths. I am having trouble getting the "current" cell signal strength, but I don't have any problem getting the "neighboring" cell signal strengths. To get the current cell signal strength, I created a PhoneStateListener and implemented the onSignalStrengthChanged callback. It works, but not very well. It seems like the signal strength hardly ever changes, and resolution jumps to only a few numbers. I would accept the answer that the resolution of the signal strength hardware is coarse, but when I use the TelephonyManager's getNeighboringCellInfo() method, it works much better. The signal strength readings from neighboring cells change frequently, and they have much better resolution.So, how can I get the current cell signal strength in the same way that I am getting the neighboring cell strengths? It seems odd to me that the functionality of the neighboring cells is better than the current cell. Am I missing something here?I would also like to directly call a method from the telephony manager to get current cell strength, as opposed to a listener, if possible. If anyone knows how, please let me know.
View 2 Replies
View Related
Apr 30, 2010
I just did a little test and sat them side by side. the moto showed -83 and the inc showed -79. both fluctuated but the inc was consistently 2-4 lower than the droid. if you still have your moto,give it a try...
View 6 Replies
View Related
Jul 10, 2009
How can i get the gps signal strength and the number of satellites. im using android 1.1 sdk.
View 3 Replies
View Related
Aug 26, 2010
I want to find the signal strength of GSM network. but not found any method in 1.5 sdk version is there is any alternative available to find the signal strength.
View 7 Replies
View Related
Jul 17, 2010
I'm guessing that the GPS hardware in most Android phones is the same or close. If it makes a difference I have the Moto Cliq XT.I'm going hiking tomorrow and will be using Google's My Tracks program. I've tried it twice... the first time I could not get a signal despite being out in desert with nothing to block the signal. Next time I was in the mountains and once I had a signal, it was rock solid. Worked like a charm. But I did not want to take a chance and held it in my hand the entire time. I'm wondering if anyone has tried it while the phone was in their pocket. Any issues with sat lock on? This would be much easier. I also can't imagine that you'd not be able to use GPS while the phone was in your pocket as it's not really possible to have it in your hand all of the time.
View 4 Replies
View Related
Sep 19, 2010
In an attempt to conserve my battery I've been switching between GPRS & 3G. I only switch 3G on when I need it e.g. browsing the web. Sometimes though, depending where I am, the GPRS signal is better than the 3G so I end up switching back. Is there an app that will show 3G signal strength?
View 3 Replies
View Related
Jun 6, 2010
I don't know if this is because of Sprint or the EVO but in my house I barely get 1 bar of signal and people can barely hear me on the other end of the call. This is my first Sprint phone so I don't know if it is the service or not. I came from ATT and never had these issues with my iPhone before. I am a little concerned about whether I exchange phone or am I going to just have to give up on Sprint.
View 8 Replies
View Related
Nov 18, 2010
I want to know the FM Radio signal strength in Android. For this I have to interact with hardware or not? Or is there any API which can directly give me the value of signal strength?
View 1 Replies
View Related
May 5, 2010
Is there a way to return the GPS signal Strength? Thank you for your input You received this message because you are subscribed to the Google Groups "Android Developers" group. To post to this group, send email to android-developers@googlegroups.com To unsubscribe from this group, send email to android-developers+unsubscribe@googlegroups.com For more options, visit this group at http://groups.google.com/group/android-developers?hl=en
View 3 Replies
View Related
Sep 9, 2010
Could any of you please comment on their Wi-Fi signal characteristics? I average "1 bar" unless I am right next to my wireless router, at which point it displays full strength connection Interestingly there is no significant difference when I run a bandwidth speed test (speedtest.net).
View 9 Replies
View Related
Sep 14, 2010
I believe there is a bug in the signal strength indication on the Fascinate, the one that shows the signal strength in -dBm. You can see the signal strength of the cell signal on the Menu, Settings, About, Status screen. Or you can place a widget on your Home screen. There are several widgets available, I'm using Mobile Signal Widget.I have a network extender, which basically creates a cell tower right in your home. With my Motorola Droid, I used to get signal strengths down to about -50 something and 60's in indicated signal strength. I can hold both of our Fascinates right next to the network extender's antenna and they will read no better than -86 dBm. So far I've seen signal strengths from -86 dBm to -106 dBm (terrible).I believe there is a bug in the software (Baseband) on the Fascinate. Previously, I thought the hardware (antenna/radio) wasn't very good, but now it may be software related. Has anyone seen a signal strength stronger than -86 dBm on the Fascinate?
View 25 Replies
View Related
May 15, 2010
Just wondering if I'm setting myself up for excessive battery drain on a DROID given my signal at the house. I'm testing this by looking at the status screen of my VZW blackberry My neighbor next door has a 3g ATT blackberry - he's getting -70 (solid) in my home.
View 6 Replies
View Related
Jun 9, 2010
The wifi indicator sometimes only show 1bar. Meanwhile i sitting maybe 10 feet away from my modem/router. Speed test shows me getting 3200 kbps down and 1200 kbps up.With two bars I am getting 8700 down and 2400 up. I never get 3 bars. Any analysis of these numbers? Are they typical? Anything I can do to achieve 3 bars?
View 7 Replies
View Related
Dec 5, 2009
since i had a big problem just now with messing around with things to try to get signal strength better. i was wonder. whats considered the best or great signal strength i dont mean in bars i mean in the numbers like in the settings area.
View 1 Replies
View Related
