I am having problems with the quick search feature. I did a random search for Mcdonalds and a map pulls up that is no where around me. I clicked update location but it says my location is unavailable. I have GPS enabled and my navigation app works just fine.
View 1 Replies
i've had my phone about 3 weeks now. up until last week, the htc weather widget would update to my current location. when i was home, it would show the town i live in. i also had the google internet option to use my location and this would also work perfectly until last sunday.now, the weather location was stuck on miami no matter where i went (as far north as west palm beach) and the internet shows up 'location unavailable'. i have found out that the gps is picking up where i am in goggle maps but it seems that the cell towers are not as far as weather and internet location are concerned. i have tried all of the obvious settings.i did a factory reset and now my weather says ft lauderdale which is closer to me but still not my town. it does not update (manually either) as i move. the internet location still says location unavailable although for a fleeting minute after the factory reset, it DID locate me....then it was gone so i called verizon, they didn't have a clue. then i took it to the store and it turns out EVERY phone the tech tried in the store had the same problem, including his. he told me it was a google problem and there was nothing he could do about it. i felt if i tried explaining how that would make it a verizon problem as well, it would be a losing battle
View 7 Replies View RelatedI'm developing a mapping app using Eclipse 3.5.I'm setting the minimum update period with the LocationManager's requestLocationUpdates method, via a configuration activity. When I set the property I see in Logcat that the system process sets the value OK.When I actually send a new location from the DDMS emulator control and the location changes on the map view, I see that the system process then sets the minimum time to zero.Below is a capture of the system's log messages. You can see that I'm setting the period to 32 seconds, then 16, then, after I've sent a simulated location change the system sets it to zero.The map responds to location changes to location changes instantly even if they are sent only a couple of seconds apart.
View 1 Replies View RelatedWhen ever I try to use the feature "My location" in google maps, everytime, no matter when or where I am I always get the error "location temporarily unavailable" Is there a setting I'm missing?
View 7 Replies View RelatedEverytime i use google maps with just the GPS enabled i get this message, if i allow wireless networks then i get a location but it's far from accurate.
View 2 Replies View RelatedI searched and couldn't find anything about this on the forum. I have a rooted Eris running froyo. I've been traveling a LOT lately, so I've been using Nav whereas usually I don't need to. Repeatedly in my travels of the last month or so, nav will tell me "your location is currently unavailable" when I try to get directions from "my location" to a destination. This seems to be random and totally independent from signal strength of towers or the GPS. Last night while driving into Memphis I really needed it because I had no clue how to get where I was going. I eventually had to pull over and reboot the phone, which immediately fixed the problem. It has randomly started working again in the past without a reboot, and I believe rebooting did NOT fix the problem on a few of those occasions although I'm not positive about that.
Is the solution always going to be to do a reboot, or is there some setting or bug I can fix?
Recently all my android devices think they are in Spain when I am at home in Toronto.
I think this was caused when I ran a location spoofing program on only one of my devices, one of the locations I set it to was Spain (among others).
I've tried clearing the data for the Network Location apps, changing the SSID on my router with no luck.
The only way it shows the correct location is when I go outside and run Google maps long enough to get a GPS fix. But when I go back inside I am back in Spain!
The devices this is affectingGalaxy Nexus with my google account
Nexus 7 with my google account
Galaxy S3 with my google account
Galaxy S2 without my google account
How could I fix the location which appears on the clock on the home screen and serves as weather forecast location? I am not living near a big city listed on the weather location list and when at home, the current location usually is indicated some dozen miles away from my home. This could be a cosmetic problem, but in the Alps (where I am living) weather a short distance away can be quite different from where you are.
Besides that, it would be nice to know the weather at home while beeing abroad.
In my application I have to fetch the current location. First it correctly fetches the location. But we are moving from the current location to some other location. It shows the previous address. It is not updating the location. My code is: locManager = (LocationManager)getSystemService(Context.LOCATION_SERVICE); locListener = new MyLocationListener();locManager.requestLocationUpdates(LocationManager .GPS_PROVIDER ,0,0,locListener); location = locManager.getLastKnownLocation(LocationManager.GPS_PROVIDER);if(location != null){latitude = location.getLatitude();longitude = location.getLongitude();} Please find the mistake and when i launch first time it is not working on second time itself it is working so check this thing also.
View 1 Replies View RelatedI have an application which uses the network as the location provider (rather than GPS eg.), however I can't seem to figure out how to send the emulator test coordinates. In DDMS I would usually send coordinates in the Emulator Control tab.Is there a place to simulate coordinates derived from the cell phone network provider?
View 6 Replies View RelatedI want to override the method enableMyLocation() in MyLocationOverlay class, in order to implement my own positioning algorithm to get latitude/longitude, and then plot them onto a MapView. I figured out how to do that, but now I'm stuck because I dont know what Canvas to pass when I call the method drawMyLocation().
Here is the MyLocationOverlay class
The way we are retrieving locations from our Android phones is to 1st get a Coarse Location followed by a Fine Location. This is for the case where the user may be inside a building initially and unable to track satellites. After we get our coarse location we transition to a fine location to track satellites. This method has been working fine for several months. We recently upgraded to 1.5 and our mapping application, to my recollection continued to work.For the past couple of days we have not been able to get a coarse location and we are receiving a status message in the onStatusChange callback of.We have re- installed previous versions our code that used 1.1 and we are receiving the same status message of .TEMPORARILY_UNAVAILABLE. Other than the obvious description of the constant, we can find no meaningful information.
View 2 Replies View Relatedtoday i was trying to open my old workspace projects by Eclipse but the old projects used old SDK path n so when i try to change my SDK location the eclipse not allow me tho submit my new location how i can solve this problem
View 1 Replies View RelatedDon't know if any of you can help,my location on the home screen on my legend seems to have stuck on where i was yesterday & has not relocated back to where i am now.gone in the programm & it says the place name i was yesterday with current beside it in brackets.added my home city,but cant seem to get it as my current location.Synced a few times this morning & wireless network is ticked,should i tick gps satellites?
View 1 Replies View RelatedIs there any way to specify the time intervals that the Location Manager broadcasts the current location?
I am using a method called startListening:
CODE:.....................
I've found bits and pieces of this answer scattered through other posts, but I wanted to record it here for others.How can I simply request the user's GPS and/or Network location and, if they haven't enabled the service, prompt them to do so?
View 1 Replies View RelatedI have an activity that needs to display an alert to user when location is updated,
but i need first to get current location (update last known location) and then start a location update listener to display alert in this activity.
Basically what i need is to display an alert if location changed from time activity was created.
If i use getLastKnownLocation when activity is created, it might be outdated, then the requestLocationUpdate listener is called a few seconds from activity creation time.
How can i do this?
I can't get the browser to have my location since I updated to 2.1.
View 2 Replies View RelatedI registered a PendingIntent to requestLocationUpdates(provider, minTime, minDistance, PendingIntent). But when my broadcast receiver receives this intend, how do I remove this request with removeUpdates(PendingIntent)? The receiver doesn't hold a reference to the original PendingIntent.
View 1 Replies View RelatedI am trying to see if anyone knows if it is possible to change the update time of MyLocationOverlay (http://bit .ly /dBIVdj). I have tried subclassing MyLocationOverlay and implementing my own location manager but when that happens I do not see the overlay on the map. I would try overriding the drawMyLocation method however I don't know which canvas to provide the method (since I would be drawing onLocationChange). To summarize, I am looking to do three things in MyLocationOverlay subclass:
1. Change the location update times to whatever I want.
2. Draw the "my location" dot with the radius when the onLocationChanged() method is called.
I've thought about making my own special class with special overlay -- but I feel like there has to be a better method to get what I want out of this class.
After I closed my app for a while then reopen it again,my app will not update location or sometime it will take long time( about 5min) before update. How can I fix it? This is my code...
View 3 Replies View RelatedLooks like I've run into some breakage from 1.5 to 1.6 after all. I am registering location listeners with LocationManager.requestLocationUpdates() With GPS as location provider, I run into a problem with navigation stopping by itself after a few seconds, just to return, stop again, in an endless cycle. I haven't seen this prior to 1.6 Donut and I have no clue what might cause this problem.
Here's the Logcat output:
10-21 21:53:09.147: DEBUG/libgps(74): PDSM_PD_EVENT_GPS_BEGIN 10-21 21:53:11.177: DEBUG/GpsLocationProvider(74): exceeded MIN_FIX_COUNT 10-21 21:53:11.177: DEBUG/GpsLocationProvider(74): stopNavigating 10-21 21:53:11.177: DEBUG/libgps(74): qct_gps_stop 10-21 21:53:11.187: DEBUG/libgps(74): PDSM_PD_EVENT_END 10-21 21:53:11.187: DEBUG/GpsLocationProvider(74): Releasing wakelock 10-21 21:53:13.097: DEBUG/dalvikvm(74): GC freed 2562 objects / 104912 bytes in 223ms 10-21 21:53:20.227: DEBUG/dalvikvm(74): GC freed 1345 objects / 51352 bytes in 236ms 10-21 21:53:21.180: DEBUG/GpsLocationProvider(74): ALARM_WAKEUP 10-21 21:53:21.187: DEBUG/GpsLocationProvider(74): startNavigating 10-21 21:53:21.187: DEBUG/libgps(74): qct_gps_set_position_mode = 1, fix_frequency = 10 10-21 21:53:21.187: DEBUG/libgps(74): qct_gps_start 10-21 21:53:21.207: DEBUG/GpsLocationProvider(74): Acquiring wakelock 10-21 21:53:22.147: DEBUG/libgps(74): PDSM_PD_EVENT_GPS_BEGIN 10-21 21:53:24.167: DEBUG/GpsLocationProvider(74): TTFF: 2978 10-21 21:53:27.287: DEBUG/dalvikvm(74): GC freed 1417 objects / 52512 bytes in 232ms 10-21 21:53:34.397: DEBUG/GpsLocationProvider(74): exceeded MIN_FIX_COUNT 10-21 21:53:34.397: DEBUG/GpsLocationProvider(74): stopNavigating (and so forth)
A web research for these logs didn't turn up anything (which is unusual in my experience), so this leads me to post the question here wondering what the root of the problem might be.
I was wondering if anybody had the same issue with GPS as I did. When I launched Locations first time, it found the satelite very fast. Now it almost cannot find a satelite to update my location. I wrote almost, because once it did manage, but that was once in at least twenty tries. Do you have any idea how to check if the radio is ok. I read somewhere that one should try with master reset of the phone. If so, would it be enough to backup my data with Titanium backup and option "Backup all users apps + system data" and restore it later on? Will that make a full restore of my phone or do I have to backup some additoial data? Like, what will happend to my personalize data, apps passwords etc.
View -1 Replies View RelatedI have this phone for probably two months now. Overall I'm quite happy considering I have an old one for more than five years.
However, I have two issues that are really bugging me. I think it might have occurred after the froyo update although I'm not sure.
My first issue is the GPS. I takes much longer than before to find my location although when it does it is very accurate. Lots of time it's more than five minutes. It was much faster before. I don't know what's going on!
Second I have 4G problem. If I serf the web with 4G, I'm fine. When I turn on my tethering more than 90% of the time, it will automatically revert back to 3G even if I have good connection (two or more bars). This is quite maddening to say the least. Was wondering if anyone has any ideas. Will a factory reset.
also, sometimes finding current location on GPS doesn't work.
I'm guessing i should try a new radio, huh?
After a recent trip away I have come back and the HTC clock widget does not update to the current location... it is stuck on 'United Kingdom' instead of my current location...
As a test I went for a drive today and whist 'Latitude' showed where I was, the google home page still showed the wrong location, and HTC widget still showed just 'United Kingdom'...
This has just got me stumped..
I am trying to implement the MyLocationOverlay class from google maps. However, when I try and use my own locationManager -- I cannot get the overlay to acutally draw on the map. I am wondering if I am doing something wrong.
I don't want to call the super method(enbaleMyLocation) of the MyLocationOverlay class because that request updates from the locationManager way too quickly and will eat my battery alive.
Here is my code...
Is there any API method{[android.location " pack ] to get location name? did not find related method to to retrieve location name for given GeoPoint(lat,lon); I wanted to keep list of location names for particular GeoPoints (lat,Lon) in journey. can this be achievable in Android to calculate the name of location from lat .
View 4 Replies View RelatedI am working on an app that uses the GPS on my g1. I'm wondering if it is possible that when I am using the app I can have it update my Google Latitude location every x number of minutes. Any thoughts on how this may be accomplished?
View 1 Replies View RelatedI keep getting the above message on my phone. I've tried changing settings within the location tab but the msg keeps popping up.
View 1 Replies View Related