Android :: Location Provider / Coarse Location
Jun 25, 2009
The way we are retrieving locations from our Android phones is to 1st get a Coarse Location followed by a Fine Location. This is for the case where the user may be inside a building initially and unable to track satellites. After we get our coarse location we transition to a fine location to track satellites. This method has been working fine for several months. We recently upgraded to 1.5 and our mapping application, to my recollection continued to work.For the past couple of days we have not been able to get a coarse location and we are receiving a status message in the onStatusChange callback of.We have re- installed previous versions our code that used 1.1 and we are receiving the same status message of .TEMPORARILY_UNAVAILABLE. Other than the obvious description of the constant, we can find no meaningful information.
View 2 Replies
Jan 27, 2010
I have an application which uses the network as the location provider (rather than GPS eg.), however I can't seem to figure out how to send the emulator test coordinates. In DDMS I would usually send coordinates in the Emulator Control tab.Is there a place to simulate coordinates derived from the cell phone network provider?
View 6 Replies
View Related
Oct 21, 2010
i have developed an app which just notify when location changed. it used GPS_PROVIDERS as provider. but as devices go inside of some building. it stop listening. i want to change the provider at that time to network provider.. so should i write locationManager.requestLocationUpdate method there in status change method of listener.with provider to network provider. or something else will do the task.
View 3 Replies
View Related
Nov 23, 2010
As I understand it, I have three location providers to choose from: GPS, Network and Passive.
I would like to obtain my location by detecting the Wi-Fi network I'm connected to, I believe both Cell Triangulation and Wi-Fi location determination is covered under the Network provider.
However, despite being connected to a Wi-Fi access point, my program always seems to use cell triangulation rather than Wi-Fi to determine my location (assumed based on the huge inaccuracy of the returned coordinates).
It doesn't look like there's any way to force the use of Wi-Fi only? How does Android decide when to use Wi-Fi over cell triangulation?
View 1 Replies
View Related
Apr 8, 2010
How can I find out that the GPS provider has failed to get location in android?
View 2 Replies
View Related
Mar 31, 2010
I am working on an app that fetches localized data from the Web based on the user's long/lat. Currently I am querying the system for the best enabled provider [my criteria defines best basically as most precise--not sure if this is the best idea for my application, as at the point where I fetch data it really doesn't matter if the user is here or 3 miles from here.].. But anyhow, I'm curious as to what is most reliably the fastest Location provider? Network or GPS? My app hangs a bit "Acquiring your location" on my loading screen and I'd like to cut this wait time down as much as possible.
View 17 Replies
View Related
Mar 16, 2009
I am unable to get the location updates when i use Network location provider. From the older posts i understood that to use NW location provider we need to do the following. code...
View 2 Replies
View Related
Oct 22, 2009
Looks like I've run into some breakage from 1.5 to 1.6 after all. I am registering location listeners with LocationManager.requestLocationUpdates() With GPS as location provider, I run into a problem with navigation stopping by itself after a few seconds, just to return, stop again, in an endless cycle. I haven't seen this prior to 1.6 Donut and I have no clue what might cause this problem.
Here's the Logcat output:
10-21 21:53:09.147: DEBUG/libgps(74): PDSM_PD_EVENT_GPS_BEGIN 10-21 21:53:11.177: DEBUG/GpsLocationProvider(74): exceeded MIN_FIX_COUNT 10-21 21:53:11.177: DEBUG/GpsLocationProvider(74): stopNavigating 10-21 21:53:11.177: DEBUG/libgps(74): qct_gps_stop 10-21 21:53:11.187: DEBUG/libgps(74): PDSM_PD_EVENT_END 10-21 21:53:11.187: DEBUG/GpsLocationProvider(74): Releasing wakelock 10-21 21:53:13.097: DEBUG/dalvikvm(74): GC freed 2562 objects / 104912 bytes in 223ms 10-21 21:53:20.227: DEBUG/dalvikvm(74): GC freed 1345 objects / 51352 bytes in 236ms 10-21 21:53:21.180: DEBUG/GpsLocationProvider(74): ALARM_WAKEUP 10-21 21:53:21.187: DEBUG/GpsLocationProvider(74): startNavigating 10-21 21:53:21.187: DEBUG/libgps(74): qct_gps_set_position_mode = 1, fix_frequency = 10 10-21 21:53:21.187: DEBUG/libgps(74): qct_gps_start 10-21 21:53:21.207: DEBUG/GpsLocationProvider(74): Acquiring wakelock 10-21 21:53:22.147: DEBUG/libgps(74): PDSM_PD_EVENT_GPS_BEGIN 10-21 21:53:24.167: DEBUG/GpsLocationProvider(74): TTFF: 2978 10-21 21:53:27.287: DEBUG/dalvikvm(74): GC freed 1417 objects / 52512 bytes in 232ms 10-21 21:53:34.397: DEBUG/GpsLocationProvider(74): exceeded MIN_FIX_COUNT 10-21 21:53:34.397: DEBUG/GpsLocationProvider(74): stopNavigating (and so forth)
A web research for these logs didn't turn up anything (which is unusual in my experience), so this leads me to post the question here wondering what the root of the problem might be.
View 10 Replies
View Related
Dec 19, 2009
We see the bigger font for Agree and disagree buttons for the Alert dialog when the network provider is selected in the location settings menu. Any pointers or suggestions which part of the framework code need to take a look. This dialog is controlled by Networklocation.apk which is not open source.
View 3 Replies
View Related
Sep 11, 2012
I'm working on a project to display a route in a MapView based on current location from GPS Provider. I'm able to draw the path between two points but the problem starts when the location changes to a new point causing the draw path to erase. Basically my Location Listener saves the current Geopoint and sets the new Geopoint location and after that it starts the overlay to draw a path based on those two points. I think an option could be saving the coordinates to a database and then pulling the information from there to draw the path.
private class MyLocationListener implements LocationListener {
public void onLocationChanged(Location location) {
Toast.makeText(getBaseContext(), "Tracking device..",
Toast.LENGTH_SHORT).show();
[code]....
View 1 Replies
View Related
Oct 26, 2010
I'm developing a mapping app using Eclipse 3.5.I'm setting the minimum update period with the LocationManager's requestLocationUpdates method, via a configuration activity. When I set the property I see in Logcat that the system process sets the value OK.When I actually send a new location from the DDMS emulator control and the location changes on the map view, I see that the system process then sets the minimum time to zero.Below is a capture of the system's log messages. You can see that I'm setting the period to 32 seconds, then 16, then, after I've sent a simulated location change the system sets it to zero.The map responds to location changes to location changes instantly even if they are sent only a couple of seconds apart.
View 1 Replies
View Related
Sep 17, 2010
In my application I have to fetch the current location. First it correctly fetches the location. But we are moving from the current location to some other location. It shows the previous address. It is not updating the location. My code is: locManager = (LocationManager)getSystemService(Context.LOCATION_SERVICE); locListener = new MyLocationListener();locManager.requestLocationUpdates(LocationManager .GPS_PROVIDER ,0,0,locListener); location = locManager.getLastKnownLocation(LocationManager.GPS_PROVIDER);if(location != null){latitude = location.getLatitude();longitude = location.getLongitude();} Please find the mistake and when i launch first time it is not working on second time itself it is working so check this thing also.
View 1 Replies
View Related
Mar 4, 2010
I want to override the method enableMyLocation() in MyLocationOverlay class, in order to implement my own positioning algorithm to get latitude/longitude, and then plot them onto a MapView. I figured out how to do that, but now I'm stuck because I dont know what Canvas to pass when I call the method drawMyLocation().
Here is the MyLocationOverlay class
View 4 Replies
View Related
Aug 8, 2010
While using network provider for location updates, I found that it is the same time that I set on my device. Can it not be that provided by network as it goes when it is GPS. Or if network provider cannot provide time , then atleast location.getTime() should return 0 instead of device time. Is there any way to avoid device time, as I want to distinguish it.
View 1 Replies
View Related
Aug 20, 2010
I need to fool GMap application on android device by providing my own positioning data. What is the possibility and how shall i go about achieving it?
View 2 Replies
View Related
Mar 15, 2013
Recently all my android devices think they are in Spain when I am at home in Toronto.
I think this was caused when I ran a location spoofing program on only one of my devices, one of the locations I set it to was Spain (among others).
I've tried clearing the data for the Network Location apps, changing the SSID on my router with no luck.
The only way it shows the correct location is when I go outside and run Google maps long enough to get a GPS fix. But when I go back inside I am back in Spain!
The devices this is affectingGalaxy Nexus with my google account
Nexus 7 with my google account
Galaxy S3 with my google account
Galaxy S2 without my google account
View 2 Replies
View Related
Nov 14, 2010
How could I fix the location which appears on the clock on the home screen and serves as weather forecast location? I am not living near a big city listed on the weather location list and when at home, the current location usually is indicated some dozen miles away from my home. This could be a cosmetic problem, but in the Alps (where I am living) weather a short distance away can be quite different from where you are.
Besides that, it would be nice to know the weather at home while beeing abroad.
View 3 Replies
View Related
Jul 2, 2010
i've had my phone about 3 weeks now. up until last week, the htc weather widget would update to my current location. when i was home, it would show the town i live in. i also had the google internet option to use my location and this would also work perfectly until last sunday.now, the weather location was stuck on miami no matter where i went (as far north as west palm beach) and the internet shows up 'location unavailable'. i have found out that the gps is picking up where i am in goggle maps but it seems that the cell towers are not as far as weather and internet location are concerned. i have tried all of the obvious settings.i did a factory reset and now my weather says ft lauderdale which is closer to me but still not my town. it does not update (manually either) as i move. the internet location still says location unavailable although for a fleeting minute after the factory reset, it DID locate me....then it was gone so i called verizon, they didn't have a clue. then i took it to the store and it turns out EVERY phone the tech tried in the store had the same problem, including his. he told me it was a google problem and there was nothing he could do about it. i felt if i tried explaining how that would make it a verizon problem as well, it would be a losing battle
View 7 Replies
View Related
Mar 23, 2010
I have some Android code that needs to get the best available location QUICKLY, from GPS, network or whatever is available. Accuracy is less important than speed.
Getting the best available location is surely a really standard task. Yet I can't find any code to demonstrate it. The Android location code expects you to specify criteria, register for updates, and wait - which is fine if you have detailed criteria and don't mind waiting around.
But my app needs to work a bit more like the Maps app does when it first locates you - work from any available provider, and just check the location isn't wildly out of date or null.
I've attempted to roll my own code to do this, but am having problems. (It's inside an IntentService where an upload happens, if that makes any difference. I've included all the code for info.) What's wrong with this code?
CODE:..............
Unfortunately, this finds the network provider, but only ever outputs latlng null 30 times - it never seems to get a location at all. I never even get a log statement of locationChanged.
It's funny, because from ddms I can see output like:
CODE:..............
Seeming to suggest that the network provider does have some location info after all, I'm just not getting at it.
I think working example code would be a useful resource for the Android/StackOverflow community.
View 2 Replies
View Related
Jun 7, 2010
I am having problems with the quick search feature. I did a random search for Mcdonalds and a map pulls up that is no where around me. I clicked update location but it says my location is unavailable. I have GPS enabled and my navigation app works just fine.
View 1 Replies
View Related
May 10, 2013
today i was trying to open my old workspace projects by Eclipse but the old projects used old SDK path n so when i try to change my SDK location the eclipse not allow me tho submit my new location how i can solve this problem
View 1 Replies
View Related
Apr 2, 2010
Is there any way to specify the time intervals that the Location Manager broadcasts the current location?
I am using a method called startListening:
CODE:.....................
View 5 Replies
View Related
Aug 12, 2010
I've found bits and pieces of this answer scattered through other posts, but I wanted to record it here for others.How can I simply request the user's GPS and/or Network location and, if they haven't enabled the service, prompt them to do so?
View 1 Replies
View Related
May 5, 2009
Is there any API method{[android.location " pack ] to get location name? did not find related method to to retrieve location name for given GeoPoint(lat,lon); I wanted to keep list of location names for particular GeoPoints (lat,Lon) in journey. can this be achievable in Android to calculate the name of location from lat .
View 4 Replies
View Related
Jul 19, 2010
I checked and loading up my maps application or another app that I've written that uses the location API finds me almost immediately - this, on the other hand, leaves me waiting forever without a single update. And yeah - I checked my permissions in AndroidManifest :)
View 1 Replies
View Related
Oct 13, 2010
Am trying to develop an app that show current location. but i am having one prob. my application is showing location on location change occur.* but how to show location first time. * i want to take location manually..not by onlocationchange Method in location manager.
View 9 Replies
View Related
Feb 23, 2010
I'm done creating an android program that adds a marker to a location. But I need to show CURRENT MY LOCATION in the MAP. I know this is done thru location based services but I don't know how to incorporate it into my program.
Here is my onCreate command:
CODE:.......
I have an onTouchEvent that places the marker. So no problem there, the problem is I need to display my location at the start of the program. It should show a mark that says, "You are here" or something like that in the map.
View 3 Replies
View Related
Nov 14, 2010
Recently, my Droid has had trouble getting a GPS fix on my location (using the Maps app that comes with the system). If I try again, it often can find me on the second or third try, but that's too many. Anyone else having this problem? Any fixes?
View 1 Replies
View Related
Apr 16, 2009
This code used to work in SDK1.1 but stopped working in 1.5 I have a class that implements LocationListener
in the onLocationChanged(Location location) method I have: Geocoder geocoder = new Geocoder(this, Locale.US); try { List<Address> addresses = geocoder.getFromLocation (location.getLatitude(), location.getLongitude(), 1);
View 5 Replies
View Related
Sep 15, 2010
I m working on my one application in that user have to put latitude and longitude of the location and after pressing the button the map shows that location.
View 19 Replies
View Related
