I'm certain this is a router issue seeing as my Eris can find all other hot spots, but my phone cannot detect my Belkin Wireless N+ router, even when it's very close. I am wondering if anyone has had this issue and how to maybe fix it.
View 12 Replies
I have noticed that my wifi signal strength is crap. I can be in the same room about 4 ft away from my router and my signal strength is 2 bars on my wifi. Also on my 3g coverage I am at 1-2 bars max. When I 1st got my phone never had this problem. Any ideas?
View 16 Replies View RelatedNew to Eris and have set up Wifi to connect to home router (Verizon FIOS Actiontec). Successfully connected (accepted WEP) but get very weak signal and then lose connection. I've turned off "Mobile Network" but still have this problem. I am one room away from router and receive full signal on iMac and printer but only a dot under the Wifi symbol on the Eris. Exchanged a Motorola Droid (which received and held full signal -- as did my prior iPhone)) for Eris. VZW tech support clueless and immediately sent me to HTC support. While they tried (had some not very good explanations -- battery not pushing enough power) still nothing working. Any advice/help would be greatly appreciated -- this is the only downside right now.
View 3 Replies View RelatedI am switching my phone from Droid X to something new one (probably Droid Charge..) soon.After I switched, my old Droid can be used for checking email or surfing web within Wifi area? Since my Droid will soon end its contract, I want to give it to my friend who just wants to have it as a web checking device.
View 2 Replies View RelatedAre you guys experiencing any issues with the WIFI signal on the droid? I am not getting any signal in areas of my house where my iPhone and Droid Eris (exchanged Eris for Droid) had no problems.
View 8 Replies View RelatedI cant figure out why my girlfriends x has the wifi and the 3g signal on the status bar at the same time. When my wifi is on, my 3g Indicator disappears. What is supposed to happen?
View 3 Replies View RelatedI launch the wifi tether program, but my laptop (a whopping 6 inches away) finds NO SIGNAL. I am running Bugless Beast 0.1 Froyo with P3's 250-1000MHz kernel. Everything else works great, including Flash 10.1 but I can't seem to get wifi tethering working. Not a show-stopper, but a nuisance I would like to fix. Anyone else with this problem? And have any of you figured out a fix?
View 11 Replies View RelatedHas it been determined if the issues with WiFi or 3G signal dropping a hardware issue on the device or a software issue? I have 3 days left to exchange it for a brand new one and it would defeat the purpose if it ends up being on the software side. I really love the heck out of my DX (52hr battery life with light usage!). But I'm getting sick and tired of either signal dropping randomly and not being able to connect on the Internet. I have to turn WiFi off/on, or with 3G, wait 'till it finally decides to reconnect itself again or close window and try again. When I do get a locked signal, it is fast, but within 10-15 minutes it drops. With WiFi I have tried many configuration with my router and everything is a No Go, same results.
View 7 Replies View RelatedI am virtually unable to get a wifi signal in my house on my droid x unless I am a few feet away from my router. None of my other wifi devices in my house are having this issue. When I check my wireless settings on my dx it says the signal strength is poor. I'm running rooted GB 4.5.602. Does the baseband have to do anything with this (BP_C_01.09.13P)?
View 2 Replies View RelatedIs there any way to set up WiFi so that the phone automatically connects to a saved WiFi signal? Example. when I walk into my house my phone auto detects and switches to WiFi without me going into settings?
View 8 Replies View RelatedI think I figured out why sometimes my Droid stays on for 1.5 days and sometimes after 6 hour of just being idle the battery is drained.
When wifi is turned on an connected to a network, the cellular signal is way low and it just drains the battery.
Lately it seems as though every time I tried to use the Market ,Slacker radio or Pandora radio I have problems staying connected to the network. Even with a fairly decent wifi signal I receive a network error message. My phone is completely stock other than Apps I have downloaded.
View 4 Replies View RelatedIs there anything I can do to get a better signal? I have one 3G bar all the time no matter where I am. I tried a *228 option 2 and it didn't help. Any other codes or suggestions. It is my 2nd Eris and I know Verizon wont take back a "low signal" phone.
View 4 Replies View RelatedJust updated my prl per another thread which incidently didn't change and now I have the dreaded 50% without signal bug as well as awake and up time at 100%!I am a newbie and have no clue what to do as my phone was fine until I updated the prl (which didn't change!).
View 10 Replies View RelatedReceived an update on my Eris a few days back for Google Maps (I think that was the application that was targeted). Since then, when I use the Navigator the GPS has had a problem connecting. Sometimes it searches for a GPS signal for almost 30 minutes. I'm in the heart of Denver and have not had this problem before the update. Did anyone else update and are now having connection issues?
View 4 Replies View RelatedFor the past two days, I've had no service. I was using xtrROM4 when it first started. So I went back to EvilEris and it worked for a little while, then yesterday stopped working again. So I re-flashed xtrROM4 and it worked all night and this morning. Now it's gone again. Can't make a call, send a text, get online, nothing.
I'm at work, and I never had the 'best' signal, but I'd go by a window and be fine. Now nothing, no matter where I go.
I notice no signal where i would usually have 2 or 3 bars. is there a fix to this? cause its draining my battery if i look at battery usage. i heard doing airplane mode or something fixes it but idk.
View 12 Replies View RelatedIt's done this twice now (before and after factory reset). 2.1 OTA, not rooted.
Whenever I turn on the wifi, or I become in range of my WPA2 network, it doesn't always connect. I say "always" because it seems to be random. If I toggle wifi on or off, it doesn't always connect. Sometimes it connects after 30+ seconds. Every other device connects just fine.
The only sure way to get it to connect is to force it to rescan, usually by going to Settings and displaying all SSIDs in range. THEN it connects, always and immediately.
The even sillier thing is, it will alert me of open networks, but never connect to my own saved network.
In one of my application I need to display all the Wifi and bluetooth devices which are paired to my mobile and it's Signal Strengths .Wifi side it is ok for me to display signal strength(RSSI).But i got a problem at Bluetooth side.I searched for the method which is suitable for this task,i found one method that is intent.getShortExtra(BluetoothDevice.EXTRA_RSSI, Short.MIN_VALUE);
It is displaying only the new device RSSI which is not paired to my mobile.Is there any idea for getting all bluetooth devices RSSI.Plz give me idea or source code ?
I upgraded to the second 2.1 leak for the eris and my usually always shows that I have one or two bars of signal strength but when I go to about phone it shows that i have -89db signal strength, is that good and is there just something wong with the bar signal indicator or is that a bad signal and if so how can I increase my signal? I already tried using the *228 number thing to update my prl but that didn't help. Before the leak i would have three or for bars
View 6 Replies View RelatedNo matter where I am I NEVER get more than 2 bars and more often than not, there's only 1 bar! Really? I'm not convinced it is only cosmetic. I seem to get most of my calls, but occasionally they go through to voicemail even though I've got the phone right next to me. It is so frustrating to be in the house with no signal! I always had at least 3 signals in my house.
Has anyone contacted Verizon about this? It is the only thing bothering me from 2.1 upgrade. Other than that I find the phone is truly awesome, but it IS a phone! However, I'm afraid to call Verizon tech people who always seem to go through the basics without any real regard to your issue, and have the screw up the phone with some random setting they want to try.
I have had my Eris for a week or so and am getting concerned about it's reception. I am noticing the bars will fluctuate wildly while sitting at my desk in an area that has great Verizon coverage! I am looking at my Signal Strength and it is flipping from 89 dBm 12 asu to 0 dBm 0 asu without even moving the phone! What is going on?? Do I have a bad device, or is this normal? Thanks for any info.
View 13 Replies View RelatedCouldnt find my answer on the previous topics. But my phone on verizon hardly has full signal. Im running 2.1 on a brand new phone that i bought off a guy from craigslist. It seems my signal is only 1 to 2 bars most of the time, giving me around -86dbm. Sometimes it will be 3 bars, then it drops to one or none. Wondering if this is killing my battery too. Is there some update that fixes this? Or some test to perform if whats happeneing is normal or what?
View 20 Replies View RelatedReally interested to find out if in fact the fluctuating signal bars (and numeric value in settings) are fixed or not. I'm reading various things. Dealbreaker for me if it's not. I realize it's a UI issue only but how would I know the real signal strength if I'm say traveling and outside my usual comfort zone as to known coverage?
View 4 Replies View RelatedGot a new Eris here and am having an issue. When using wifi the signal strength is extremely low and only holds the signal for about 6 to 10 feet away. All the other phones work on this router and a friends router, so the issue is definitely the phone. is there any settings I could change that might help?
View 6 Replies View Relatedneed a cheap fix for boost at work only able to text and thats if I walk around my office to catch a signal.
some stips though: cannot hook up to our computers needs to be cheap I/T cannot find out must go through concrete and rebar no I'm not housed in a jail but work in one.
I just got my Eris this past week and am loving the phone. I traded someone on Craigslist for it. My only complaint is that at my house I get poor reception. My family has Verizon and they don't complain about poor signal with their phones. I could never get a signal especially in my room (the basement) on my Samsung Rogue and it's the same thing with my Eris. Half the time I get 0 bars in my room. I sometimes only get 1 or 2 bars when I am at work. I did notice that when I was driving the other day it kept going from 3 bars down to 1 and back up to 2.
My Eris is not rooted or anything. I just got the phone, I'm afraid to root it cuz I might mess something up. So if someone can help me out that would be great. I tried dialing 228 and it didn't work.
I run Wireless Tethering and able to pick up a signal from my laptop. My cousin can also pick up a signal from his iPhone but my brother can't pick it up from his Droid Eris.
View 2 Replies View RelatedSo my virgin mobile phone that I had a while ago had this same problem, but less severe. I had fluctuations in the signal strength. Cover the side of the phone and the signal will go down, uncover, signal goes up.
Basically what I found, or in this case hypothesize, is that the internal antenna may be somewhere on one of the sides of the phone. When you cover the side the signal bars seem to go down. Hold the phone on the top corner and they may go back up. I've done this in a few places around my usual usage areas and all seem to follow this trend. Im not saying that correlation leads to causation, but im just saying maybe we're overlooking something here. This usually happens on the right side. However, I am puzzled that this would mean flesh interferes with radio waves...Also, I'm not complaining or questioning why as I've read several other threads on this issue and side with those who think the bars mean nothing. I've been able to make perfectly good phone calls with 0 bars, no dropped calls, and perfect sound quality.
I would like to know. Not even rooting helped the difference in signal from 1.5 to 2.1 (nonroot or root versions)
One theory is that the 2.1 signal values are different and thus report a difference in signal in the bars and in settings.