after flashing modacos R9 i cant get into recovery. after i boot into recovery and connect usb and run recovery-windows.bat from pc it says ADB server is out of date?? what should i do?
View 2 Replies
There video upon video about how to flash them but I'm in the dark about what it is?
View 1 Replies View RelatedWell I decided to have a play and rooted my phone using the unrevoked method. All quite painless.
I flashed a version of DeFrost (2.2) and had a play, but encountered a couple of problems.
So I flashed 2.3 when is became available.
Then I haf problems with battery drain. Since then there have been a number of new releases of DeFrost - pretty much every day.
So I decided to restore my Nandroid backup and stick with the stock ROM until things settle down a bit.
Having done this, I can no longer get into recovery. The phone hangs on the Pink Circle screen and I have to pull the battery.
So has restoring the Nandroid backup which was made using the ClockWorkMod Recovery destroyed the recovery flash, and is that what you would expect or has something bizarre happened to me.
Just curious as I assumed that once the Recovery was on there it would stay there.
It's no big deal as I'm sure it will be just as easy to go through the rooting process again.
Right, as of yesterday my rebooting problem seems to have become terminal. It won't boot beyond the red circle, and although it will load into the bootloader it won't go into recovery after that. Now obviously I'll be sending back for repair but what are the chances (given that it won't boot at all now) that they'll know the phone has been rooted and refuse to fix it?
View 19 Replies View Related1st Post, got my htc desire this morning and after researching for a long time already knew i wanted to root my device.I followed the instructions on this site.[HOWTO] Root Your Desire In 1 Click With UnrEVOked! *UPDATED 20/7* - xda-developers I used unrevoked3, and rooted the device. no trouble Ive backed up the device with titanium backup. Placed cyanogen onto the 4gb sd card which came with the phone.Power off the device. Rebooted whilst holding the volume down button. Got the options up. Navigated to recovery and selected it with the power button. The screen goes blank. The o2 screen comes up saying welcome and thats it, it freezes. I have to pull the battery out of the back in order to reset the device and then it starts up perfectly normal. Tried accessing recovery mode using the clockworkmod but i get the same result.All of the points on the link above were followed. Im pretty much right at the bottom! still researching the net for the answer but im now in need of additional
View 9 Replies View RelatedIn the event I must return my phone, is it possible to remove Clockmod Recovery and put STOCK recovery back on?
View 2 Replies View Relatedi have a HTC Desire 601 with Virgin Mobile (in canada) and i tried to flash a custom rom, and it didnt work, i got an error 7, i tried several rom and all i got is a error 7.now i want to go back to a stock rom , but every time i think i have a good stock rom, i get an error 7.
this is what appears in the bootloader
***TAMPERED***
***UNLOCKED***
ZARA_UL PVT SHIP S-ON RL
HBOOT-2.22.0000
RADIO-1.26.40e.00.14
OPENDSP-v.18.2.0268.0925
OS-2.14.666.3
EMMC-BOOT 1024MB
i flashed PhilZ Recovery (philz_touch_6.19.3-zara.zip is the exact filename), but i think i've done something wrong because everytime i try to flash anything, i get an error 7, even doing a nandroid backup gave me an error..
so, what should i do to get the phone to a working state?
I would like to do OTA update my htc desire vc but CWM does not work during update. It say "status error 7".
Therefore, I need "htc desire vc stock recovery" for OTA update.And then, how to do OTA update without stock recovery?
i need recovery for my desire 500 single sim the only one i found was cwn 6.0.3.7( you can fined it wz name:
CWMRecovery_D500_Philz.img ) it's not just old and uses volumes & power buttons, it's not very much compatible wz my phone i mean: the commands out of the sid of my screen, it's not easy to deal wz.
Ok where to begin? Been having various problems with different ROMS so thought i'd go back to a stock ROM Seems now it's overwritten clockwork recovery? How do I reinstall this easily?
View 1 Replies View RelatedI'm currently running Froyo after running the RUU: RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00.
32U_5.09.00.20_release_140022_signed.exe
as per teppic74's thread over here: Froyo RUU update available
My desire has HBOOT 083 - which I know can be problematic when flashing. My question is:
Is the unrEVOked v3.21 method of getting the new recovery menu the best/easiest/most reliable way to enable me to flash new roms on my phone? Are there any caveats? Anything I should be aware of beforehand? According to teppic74's thread, this version of Froyo cannot be rooted at the moment, which I'm not bothered about anyway. But, it would be nice to try some of those lovely new roms.
Can someone explain what the recovery mode is in the boot options of the desire?
View 3 Replies View RelatedMy interest in more space got me to the apps2sd+ faq from this forum. I rooted my phone yesterday with unrevoked and, assumed it could install this ROM for me
[URL="http://forum.xda-developers.com/showthread.php?t=773997"][ROM] [15/11]
Pre-rooted Stock Froyo (2.10.405.2) [Optional mods] - xda-developers[/URL
But this is a zip file, unrevoked does only img files. I don't understand how to install the ROM from xda-developers.com, or the mods. The forum said install in recovery, how? When I tried to format partition my SD card, from ROM manager, the phone reboots into this recovery console thing, now what? When I reboot my phone out of there, nothing has happened to my SD card.
can you flash this before you actually root your phone so you dont get bricked?and what are the ways to get a REAL brick? because i've tried looking and everyone has gotten either a usb brick or something else where they can just reflash or something.
View 2 Replies View RelatedI have Desire not rooted and I'm trying recovery but ...E:Can't open /cache/recovery/command (this comes up before even trying to run the update)
--Install From sdcard...
Finding update package...
Opening update package...
Verifying update package...
E:signature verification failed
Installation aborted.
I was having black SLCD (RUU_Bravo_HTC_WWE_1.21.405.2_T2_Radio_32.41.00.32 U_4.08.00.09_release_137222_signed.exe) and have solved the problem right now and do OTA update to Froyo and there is System Info.:
I tried installing OpenDesire 4 on my rooted Desire earlier, which didn't work. I ended up seeing the flashing Android logo on a black screen when trying to boot and can't get past it.
So, as I have a nandroid backup, I figured I could use that to recover. BUT, when I hold the volume down button and boot the phone, it just goes to the HBOOT screen. I cannot get into the recovery menu. If I select recovery from HBOOT, it just goes to a black screen.
I have tried reflashing using unrEVOked3 and the recovery-clockwork-2.5.0.1-bravo-slcd image, but it didn't fix this problem.
My Problem: Was using the HTC Desire bought in India. I rooted with Unrevoked 3.21, S-OFF with Alpharev.
I was thinking of taking my phone to HTC to show an LED burnin problem, and tried to unroot by flashing the RUU for Asia_India: RUU_Bravo_hTC_Asia_India_1.21.720.4_Radio_32.36.00 .28U_4.06.00.02_2_release_127705_signed. I thought that was the correct RUU.
I booted my phone in Fastboot, applied the RUU, and it rebooted my phone into RUU. Then it flashed an error message saying the RUU version was incorrect. Being the idiot that I am, I rebooted the phone..And got stuck!
The phone does not boot. On pressing Vol- and Power button, it vibrates, and then nothing. Screen is blank. It wont boot into Fastboot, Recovery or the ROM. If I connect it to USB and do the Vol- and Poweron, it detects my device as an Android 1.0 device.
I have tried the following:
1. Went to Android SDK, tried flashing Clockworkmod recovery image with the command:
Code:........
I've been reading this forum for awhile but can't find a solution to my problem...
1. I rooted my 2 HTC Desires 2 months ago, what went fine. Have been able to install apps that request root. And on 1 Desire I have put the Nexus1 Froyo OS.
2. Now when receive a OTA: error
3. I tried the manual update: error
Both phones came from HTC directly, any Sim Card is useable on them.
I first get the error "E:Can't open /cache/recovery/command", then I get:
"Verifying update package
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted."
I rooted it last week with the unrevoked 3 method which seemed to go ok then i tried some different roms and some worked some didnt. I tried to install the r8-bravo-desire-modacocustomrom-withadditions-a2sd+-signed...! This rom got stuck on the white start up screen. I thought that if i cleared the sd card it would install but still the same thing then i just got the white htc screen which i cant get off and i cant load the recovery to change anything...! The sd card is working and i can get into the hboot and when it reads the sd card says wrong img! Is there something missing on the sd card? Have i bricked my phone? Any ideas on a fix?
View 31 Replies View RelatedMy HTC Desire VC (T328d) was rooted and running Android OS 4.0.3 (ics).
In recovery mode, I accidentally formatted /system folder (from internal phone memory). This is because the recovery mode is all in chinese language and I did a huge mistake.The phone cannot boot showing HTC logo screen and no boot sound.
I've downloaded the kernel for this device at htcdev.com.I can enter recovery mode. My friend has the same device and his is not rooted yet.
I recently tried to root my HTC desire using UNrevoked 3.1. Everything was going well and I even had the desktop gui tell me that the process was "done", however the phone never made it into the green and black recovery menu, and now when I try and enter the recovery menu the phone gives a black screen. I then have to do a hard reset by taking out the battery. I have tried running unrevoked again with the same results and have tried using Rom manager to enter recovery this way, niether of which have helped.
I've spent alot of time searching without answers, if any one thinks they can help or just point me in the right direction I would be very grateful.
I was rooted and decided to unroot for giggles. After i did I went to root again and now I am getting this: "E: cant open/cache/recovery,command " When I reboot into recovery mode.
View 4 Replies View RelatedI took unrooted my phone today because I was going to excange it for a new one because of a loose headphone jack but it turns out it was my headphones. I used SMupdater and it went fine. now when I try ot root again I get a "can't open cache/recovery/command" error in recovery and it wont let me select any of the options by hitting the camera button. idk what to do
View 2 Replies View Relatednote before attempting any of this that rooting does void your warranty. I also am not reponsible for any damage that is done to your phone but am more than willing to help you solve a problem in IRC. See my signature on how to get on #ally IRC channel. I do not actually use the Clockwork Recovery (i use drellisdees).
Guide to flashing roms on the LG Ally with screenshots. First off. Make sure your phone is rooted. If your phone is not rooted see the following options.
Option 1a: Universal 1 click root. (easy way) Universal Androot Beta
1b: z4root 1 click root http://forum.xda-developers.com/showthread.php?t=833953
2: Original Root Method (harder way) How to "root" the LG Ally.........
I hit the top button. Flash Clockworkmod recovery or what ever it said. I then backed up my Current ROM. I then downloaded Cyanogen v6.0.0 cr2. It downloaded and rebooted my phone. But It went to a screen with a Triangle w/ exclamation and a phone under it. I then hit the up vol button and camera, and now I'm at the Android system recovery page and I don't know what to do next. These are my options reboot system now apply sdcard:update.zip wipe data/factory rest wipe cache partition wipe base band data. I did click to backup current ROM and wipe data and cache.
View 38 Replies View Relatedok, so I put the PB31IMG file on my sdcard, and the dinc_ota. I changed dinc_ota to update. (I did not name the file update.zip.zip) I powered down, I entered bootloader, and it loaded the PB31IMG and whatever. then I hit volume down and selected recovery. this brought me to clockwork recovery. I noticed the isntructions said to boot into STOCK recovery. well, I like a dummy ignored that and tried to apply the update.zip thru clockwork.
This is what I got:
CODE:.......................
So, is this because I tried doing it through clockwork recovery? is it because I didn't apply the first OTA update we got? what does that mean exactly anyways? is it saying I need to install the leaked froyo ROM, and then update the radio? How do I boot into stock recovery and not clockworks recovery? does this count as applying the update.zip once, meening if I do it again I'll brick my phone? should I sell this thing and get a samsung flip phone because I'm too stupid to own a Dinc?
First off let me say that I was wrong about this issue. Its not an issue with Easy root it is just something built into android. So I apologize to anyone I argued this subject with but specifically Patch. Its also not an issue with rom manager. This applys to users that after flashing a custom recovery they can boot into it once but the next time you try to boot into recovery it has reverted to stock.
This mostly happens to users of easy root or users that use my guide for rooting using Linux
So for the fix.
Download this file and place it in the root of your sd card.
http://dl.dropbox.com/u/7223192/install-recovery.sh
Download Terminal Emulator from the market. The one by the dev Jack Palevich.
Open it and type the following commands.
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock4 /system
dd if=/sdcard/install-recovery.sh of=/system/etc/install-recovery.sh
chmod 550 /system/etc/install-recovery.sh
sync
after that just flash the custom recovery of your choice and you should be good to go.
I tested this on my phone and another user tested it for me and it worked for both of us. If anyone has an issue let me know. This issue is so sporadic that its hard to have people test the fix.
I've managed to create a TOUCH Recovery Carliv v2.2 based on CWM V 6.0.4.4 recovery for the Zen Ultrafone 701HD.....
Link for the TOUCH Recovery Carliv v2.2 based on CWM V 6.0.4.4 recovery for the Zen Ultrafone 701HD.....
[URL]
Mirror :
[URL]
Easiest method to have this recovery for a rooted phone is below.
1.Install mobile uncle tools from Play Store.
2. Place the recovery.img provided in root of SD card.( Rename the recovery file as simply RECOVERY.IMG)
3. open mobile uncle tools and flash the recovery.
The other ways may be followed from this link of Dextrorototrix
[URL]
Full credit for this Recovery goes to Yuweng who created the auto tool CWM Magic Create [URL] found in this link [URL], and Carliv who created the recovery that made it so easy to port to new devices, Napster who shared his touch source with Carliv, and of course the original creator of CWM - Kouch. It took many hours of hard work to get us to where we are today.
is there anyway to compile cwm on windows i have cygwin installed
View 4 Replies View RelatedI flashed the custom recovery image instead of the temp way. Does anyone know how to get the orginal one back on it. Im taking it back dont want verizon pulling some stunt on me
View 6 Replies View Related