General :: Enable FASTBOOT On Micromax A30 And CWM Recovery For It?
Apr 15, 2013how to enable FASTBOOT on micromax A30 and a CWM recovery for it.
View 3 Replieshow to enable FASTBOOT on micromax A30 and a CWM recovery for it.
View 3 Replieshow to put Micromax ninja A27 in fastboot mode.
View 2 Replies View RelatedAny way to enable usb debugging via fastboot ? Flashing something may do it ?
View 5 Replies View RelatedHoW To Enable Qmobile Noir A2 Fastboot .
View 4 Replies View RelatedHTC sensation blackscreen, trying to flash a nand backup. ADB, fastboot and Shell working.
I got into shell, can #ls that directory ok ..#cd sdcard... try to #ls sdcard or any other folder and will not show content. Im not up with linux commands. I believe I am missing a mount command somewhere.
What Im after is the location of backup folder so I can see the filename of the nand backup to restore in fastboot. And the commands necessary to restore a nand backup via adb, shell or fastboot.
When I was trying to get Clockwork Mod sorted for my Huawei u8160 phone I accidentally chose to flash it with the official Clockwork mod for the Huawei u8150 stupidly misreading it as my own phone and now it has left me with an unusable recovery so I can't install any new recovery or ROM's or anything, I am getting almost constant errors whenever I try to run my phone saying whatever process has stopped working and that I need to force quit it. I have tried to start it in fastboot or whatever it is called but all I am getting is a screen that says "firmware update step 1/2 unpacking update failed", I have tried to start with many different key combinations but nothing is working.
View 9 Replies View RelatedAfter I installed a CWM Recovery(downloaded recovery.img from the internet) using Mobile Uncle, when i boot into Fastboot Recovery by pressing Volume- and power button it gets stuck on the BOLT logo.
View 7 Replies View Relatedwant CWM recovery for micromax A51
View 1 Replies View RelatedMy Galaxy Nexus won't boot with the power button and I don't think my volume down button works either. There is also a pattern lock I don't know so I can't get into the OS. Is there anyway to wipe/fastboot/enter ADB without the power button or without needing USB debugging? Or is there a way to turn on USB debugging without getting into the OS?
SPH-D700
I have an AT&T Atrix 4G and I wanted to imstall CM7.2.
I had the latest Atrix Android version on it. Then I followed the instruction at the cyanogemod wiki for the atrix. So I flashed the sbf (cyanodenmod wiki -> Motorola_Atrix_4G:_Full_Update_Guide).
The rsd lite flashing didn't succeed because the atrix rebooted and the programm couldn't switch into BP passtrougth, or so. At this point the device said something about 0x1000 no bootloader, but I could choose between rsd, fastboot and the other possibilities.
I booted into the fastboot mode and did an oem unlock. Now it says unlocked.
I booted again into the fastboot mode, and now it should be a simple
Code:
fastboot flash recovery recover.img
But:
Windows) it always says:
Code:
sending 'recovery' (4824 KB)... OKAY [ 0.453s]
writing 'recovery'... FAILED (status read failed (Too many links))
after that the device reboots and is in a boot loop
so i tried linux) The first time i tried the command everythings worked fine, but after reboot i chose.
Code:
android recovery mode, but after a while (secs) the device rebooted.
so went to fastboot again, but now the device reboots after the sending command and then it says writing failed because of no device
I don't know if when I am using rsd lite to flash a complete image the phone reboots again and i have a hard brick.
I want to know that how to open custom recovery in micromax a27 by key combinations. I have successfully flashed cwm recovery in my device & also I can go to recovery mode by quickboot or rom manager, but can't able to go to recovery by key combinations. The power & vol+ is opening the stock recovery mode not the cwm recovery mode, so, I need a way to open cwm recovery when my mobile is bricked.
View 2 Replies View RelatedI have purchased a Micromax A85, and looking for CWM for it. Is there a link, or is someone working on developing it?
View 2 Replies View RelatedI follow this thread [URL] .....
But i have faced some problem to flash CWM in my device Micromax Canvas Viva A72.
I was just searching across how to install CWM recovery in Canvas 4 but couldn't find any.
Requirements: Phone should be Rooted.
Where to Get CWM Recovery for Micromax A210 Canvas 4? Recovery Thread link & Mirror Download link REMOVED on request from original uploader!
Quote:
Flashing Instructions:
Download the CWM Recovery available in the above thread, extract it from the rar file and copy it to the ROOT of you SD Card Open Play Store and download Mobile Uncle Tools Then launch Mobile Uncle Tools and Click on Recovery Update (See screenshot) Then Click on the first recovery that it show, with location SD Card (See screenshot) And apply it. It will ask to reboot, do it and you are done..
I deleted /system folder on my nexian cosmic journey. And now my nexian is stuck...
I try to using fastboot mode to flash recovery image, but my device seems not detected. I already installed the android composite driver, but when i use "fastboot devices" command, it shows (?) So how the heck to get my nexian back to normal?..
Or perhaps, if i just be able to put back the /system folder to its place again, it would be more easy to recover it... But how access the root when phone is like that?
I have rooted my Micromax A116 and have installed CWM recovery. I need to install TWRP recovery. Can I do it or is it possible to install TWRP after installing CWM?
View 3 Replies View RelatedMy Micromax a60 stuck on logo and not going in recovery mode. When i go in recovery mode screen becomes white.
View 1 Replies View Relatedi want to know about how to get back original stock jelly bean rom and how to unroot.. and how to get back original stock recovery...
well i actually heard a news about micromax has announced 4.4 kitkat update for micromax canvas series and a110 is also one of them . so i just want to know how to get back my original rom and all that , currently i m using CanvaS4 rom ...
i press volume+ andd power button but cannot enter into cwm recovery
which enter into factory test,pcba test etc.............which mode is this?
After installing cwm recovery twice, now my tablet(micromax fun book pro)does not boot..it only goes in recovery mode on starting...Major problem is, in this recovery mode my volume keys have stopped working , only power button works for for selecting 1st option I.e reboot.
So unable to do anything, can't even select a ROM backup that I have in SD card..
My micromax funbook p300 stuck in recovery mode. When I go into recovery mode vol up/down and power key dosen't work.
View 5 Replies View RelatedFriends of Jupiter Huawei g525-u00and have been asked Ram Kastvm able but Alanmshkl. Already green screen after power ... not that fast boot mode will not go into recovery mode and not the original ROM using loam bottom half Vbala White gets going
View 5 Replies View RelatedMy Problem: Was using the HTC Desire bought in India. I rooted with Unrevoked 3.21, S-OFF with Alpharev.
I was thinking of taking my phone to HTC to show an LED burnin problem, and tried to unroot by flashing the RUU for Asia_India: RUU_Bravo_hTC_Asia_India_1.21.720.4_Radio_32.36.00 .28U_4.06.00.02_2_release_127705_signed. I thought that was the correct RUU.
I booted my phone in Fastboot, applied the RUU, and it rebooted my phone into RUU. Then it flashed an error message saying the RUU version was incorrect. Being the idiot that I am, I rebooted the phone..And got stuck!
The phone does not boot. On pressing Vol- and Power button, it vibrates, and then nothing. Screen is blank. It wont boot into Fastboot, Recovery or the ROM. If I connect it to USB and do the Vol- and Poweron, it detects my device as an Android 1.0 device.
I have tried the following:
1. Went to Android SDK, tried flashing Clockworkmod recovery image with the command:
Code:........
how to flash a kernel using fastboot on os X. Therefore I've decided to add a new post about that on XDA for those who want/need to use fastboot on mac os X. Example given for a Sony Xperia ARC LT15i. This should work for any SE device but will need different vendor ID value for another Brand.
Installation
- Download and extract Android SDK (let's say on the Desktop for the rest of the explanation)
- Add "Android SDK Platform-Tools" with android SDK Manager
- Download fastboot for mac here http:[url]....
- extract it in android-sdk/platform-tools/
Configuration
Next you need to update the PATH for tools/ and platform-tools/ folder.
- Open Terminal app and type
Code:
nano ~/.bash_profile
- Add the following two lines and change the (username) with the name of your mac os X account name :
[code].....
I have read other tutorials about the fastboot update command, but I do not understand how to make system.img from a zip Rom. How to install a Rom with fastboot? Cwm recovery can't read zip files for some reason.
HTC Explorer A310e
I am trying to setup fastboot adb on my laptop.. i set it up on my pc a while back but my pc is windows 7 and my laptop is windows 8.. i read many things online.. watched youtube.. i cant do it!!
View 5 Replies View RelatedI need go to the FastBoot menu becouse i need change the splash screen - boot image (bootlogo)
If i push + / - / power buttons, always i will go to the ClockWorkMode.
Huawei sonic U8650
Android 2.3.5
Root
ClockWorkMod
OC Kernel
i have root access, and full adb, but i cant get fast boot even with adb commands. i attempted to flash a faulty a20 tablet i had via sd install. and i obviously had a damaged flash, anyhow it wiped the tablet clean, the backlight still lights up. i can turn it on and off, and i can boot the boot loader.
is there anyway out of this, i want to install a recovery, but with no flashboot....
How I can use adb and fastboot on my computer. i
View 1 Replies View RelatedWhat is the cause of that? From my knowledge they use the same driver? ADB cannot detect device but fastboot can... This occurs in both windows 7 and xp.
View 4 Replies View Related