everything i wanted is to have my phone overclocked on 1,5GHz and now its stuck on loading screen after doing it with odin? it worked before on Omni ROM and everything and all those things i had the damn backup on phone
View 1 Replies
My widget says max is 600 no matter what i set it at inside the application. when I go in and, say, set it to 800 it will stay there and then when i back out the widget will say 600 max still. Is this a widget error or am I doing something wrong in trying to set my processing speeds?
View 3 Replies View Relatedi had the baseband version XXKPA and i needed to switch to a more stable ICS so i flashed XXLPQ without doing a factory reset, now my phone is stuck at the boot screen. it can enter into download mode, but not recovery mode.
View 2 Replies View RelatedI was running Team Jellybeans V5 No Problem for the last little while (on my T959d)Everything worked great (minus a few glitches here and there of course)Saw the update for V6, downloaded, and flashed with CWM.
Did the wipes, (cache, dalvik and factory) did the wipes again after reboot,Now Im stuck in an infinite bootloop, (goes to samsung splash, then Devilkernel Splash, then CWM where it shows cannot mount e:/ (cycles too quick I can't see it..) then it just reboots and continues, I can't boot the phone into CWM recovery, can't boot into download mode, tried USB JIG, doesnt do anything,I can't adb my phone, can't ODIN..
My htc explorer initially got stuck at the htc logo at boot and won't go any further.I searched for solutions on xda and tried to install Cyanogenmod 10.2 on it. Now the device gets stuck at cyanogenmod boot animation (was going on until half -an-hour ! )
Next i searched some more, caught TWRP recovery on a glance. Tried installing it, but my Laptop ( Win8.1 x64 ) doesnt recognize the device whatsover, even after installing the adb drivers and HTC SYNC. . Now i finally installed FLYROM v4 refined, and the phone is stuck at htc 'quietly brilliant' logo .
i am stuck at the boot password screen when i didnt not set any password for my asus transformer. i had started it up in the am no problem and then it froze around noon and then when i rebooted it, it came to this password screen, and nothing works, I have talked to the guys over at transformer forums and they said that i should try to go in it through my computer but my computer doesnt seem to recognize it either. I dont know what to do and i feel like i have a 500 dollar paper weight. its a tf101 32 g asus transformer
View 3 Replies View RelatedI've never tried to hack my phone or do anything like that. I Simply wanted to restart my phone and it got stuck in a boot loop! Will i have to call sprint. I Dont want to do a factory reset.
View 1 Replies View RelatedSo i flashed my evo 3d to boost and now in a boot loop??? ive tried installing ruu's but nothing seems to work.
View 2 Replies View RelatedI have an android tablet the is stuck at the boot logo. I've successfully gotten into recovery. But it had no menu...[URL]
USB debugging is not on. I have no clues as to the model of the tablet, as it isn't said anywhere on the device.. [URL]
my Sensation is stuck in boot loop every time i try to reboot it.
Unlocked
Pyramid PVT SHIP S-On RL
Hboot-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34
I had been flashing roms with 4ext recovery since you can just use smartflash but after the last time I flashed a rom the rom wouldn't load and just kept rebooting the phone the the htc screen over and over again
So, I just flashed the CM10 nightly for the Samsung Epic 4g [URL] and I am stuck on the boot screen. I am on CWM 6.0.1.1....
View 3 Replies View Relatedsince yesterday the smartphone is unable to boot.When it starts, it just keeps displaying the Phicomm logo, not even getting to the boot animation.The recovery menu is inaccessable, so how I can reflash the stock ROM?
Manufacturer: Shanghai Feixun Communication Co. Ltd.
Brand: Phicomm
Model: FWS 710 Pro
OS: Android 4.0.4
CPU: Qualcomm MSM7227A 1GHz
Memory RAM: 512MB + ROM: 512MB
MicroSD car slot up to 32GB
There are a few more on the english Phicomm website located here under the "Specifications" tab.
I found the [AIO]Universal Android Flasher, connected the phone via USB cable, started the program and clicked some buttons, which resulted in the message:
Code:
ERROR: Device not found
A quick search suggested to download the adb USB driver, which also couldn't find the device. I can't find any valuable information on recovering this smartphone without a recovery menu.
i had a custom rom gingerbread and then i wanted to do a factory reset to go back to the stock room , instead this give me big problems. it is stuck on the lg screen and i try to go into recovery and alit says is do not pull out battery Formatting data , Formatting cache and Factory reset and this it goes right back into the lg screen where it gets stuck . My computer recongizes my phone but i dont know how to use adb commands thing like a pro . i have everything i need in the folder "backup" in the clockwordmod folder .
View 3 Replies View RelatedMy Galaxy gio is rooted and is with a clockworkmod recovery. Yesterday, I tried to flash a custom kernel. After flashing successfully (through cwm recovery), i reboot my phone and then it stuck at boot screen.I did many searches but cannot understand any.I can go into recovery and download mode which is i think so required by odin.I wonder if I can flash any stock rom again easily. Need zip file with which i can put in sd card and install zip through cwm recovery by which i can unbrick my phone. I tried wipe data and factory reset but nothing worked.
View 4 Replies View RelatedI restarted my phone because it was freezing and it turned on on the boot screen where it gives me options to Recover, Reboot, etc. The volume button broke a long time ago. It sometimes works to move the option but pushing the power button doesn't do anything. Is there anything I can do to restart my phone avoiding this screen? It goes there every time. Could one of the volume buttons be stuck?
View 1 Replies View Relatedi installed jellyblast on my galaxy ace gt-s5830i, used it for couple of days and then restored cwm backup to stock rom. after about a week the phoen booted itself and got into bootloop. when i tried to wipe data got this mesaage : E:format_volume: rfs format failed on /dev/stl11.
* i tried installing cwm backup
* i tried installing stock rom from samfirmware using odin with/without pit.
* i tried multiformatter for changing ext4 to rfs and then again tried unstalling stock rom and also custom roms.
* i tried wipe firmware package.
* phone enters in bootloop when i flash stock rom using odin and get stuck on boot when i install custom rom through cwm.
Allview qubo stuck at boot ?new rom?
View 8 Replies View Relatedanyway I have an asus tf300t tablet that is stuck on the boot screen that says this device is unlocked on the to left. I originally had ICS on it then tried to upgrade it to JB and it was working alright but was acting weird it said i was rooted but i couldnt run rooted apps. Well I decided to do a wipe in the settings option and then after that I was stuck on the boot screen. I am unable to get into recovery i originaly had clockwork i think and i can get into apx mode but my desktop will not find my device i tried using that naked driver my computer drivers see it but everytime i use apx or fastboot it says waiting for device.
View 4 Replies View RelatedMy Sharp FX (ADS1) is stuck at the "Sharp" logo when I try turning it on, now I know that are several of these post on this forum, but I still can't find any that offers a solution for me. The phone is rooted and that's it, I haven't had time to put a new ROM or anything yet (although I would love to) and I can't seem to get into any type of recovery mode, and I think I have tried all of the button combinations, the only time that I can get it to show something other than "sharp" is when I plug it in, it shows a charging battery.
how to get into recovery mode (sym + power)
! i was trying to install a new custom ROM ( C.A.M.P ) i had Cyanogenmod 10... i came to where i flash the new rom on my computer then when i wanted to fastboot reboot to install zip on phone, my computer shuts off, now when i turn my phone on it lights up black and stays like this and i cant do anything(no CWM no nothing) so i remove battery to turn off....
Phone:Xperia Arc S LTI8i
My device is rooted, i was installing an app that tweaks performance which needed drivers to be downloaded / installed. As soon as i clicked that driver download / install button the device immediatly shut down. Now i'm stuck on its boot logo (Its a Chinese tablet powered by a RK3066 Chip / android 4.1.1) I tried (Holding power + volume down) = Dead android logo with red exc. mark on top / (Holding power + volume up) = Nothing / (Holding power + both volume up and down) = Dead android logo with red exc. mark on top / (Leaving dead android logo for a couple of minutes) = resets and logo is still stuck.
I have no custom anything . I did not do anything with the root except download apps.
I also do not have linux.
When the tablet is plugged into the PC when the dead android is displaying , it detects, but that is it, i cannot browse it what so ever.
All recovery methods in the tablet are (dead android logo)
Well rooted the i10 tonight fine went to install the play store and got force close on alot of stuff hit the reset button as the tablet forze and it boots but wont go past the impression screen then huts of
View 1 Replies View RelatedI have a T-679. it is only lightly modded. I still have stock UVLE1 with Clockworkmod recovery...v5.5 i think. All has been well until recently I have been trying out a lot of new apps. recently i got the adw launcher and camera sensor. now when i reboot i see one Samsung logo, then tmobile/android logo and jingle, then another Samsung logo and it hangs here. if i wait some time and start pushing buttons I see that the phone seems to be active. if i push the power button then the vol-up/down i hear the sound of the volume being adjusted. also very curiously i just found that if i hold down the home button and press the power button i hear a shutter sound!? In some instances, haven't figured out if its a particular button press of just random, i can get the lock screen to come up, which then allows me to unlock the phone and all works normally... until i reboot again.
edit: I just checked I have CWM recovery v5.5.04,b I have a backup from a while back and i just made another backup I also tryied wipe cache/dalvik which i thought it worked because i think it booted directly after that, but i just tryed again and this time i see no benefit/effect
last night i rooted my phone and it was perfect but today i saw an video on youtube showing how to make status bar transperent like android 4.4 in that video he said it is a app runs on rooted device .the app name was framework some thing like that i opened that app and clicked on frame work it ask me to grant root access i gave it and clicked on install/update and first time it restarted after restarting it once again i opened that app and did the same process .then thhe output was successfully created new partition and restarted and got stuck on boot loop and i cannot do any thing when i connect it to pc for pc companion the pc is not recognising the device.
View 14 Replies View Relatedi tried to do the one click clock work mod on my samsung fascinate with the phoenix kernel on the root of the sd card. everything went succesful but whe it turned back on, it kept looping, first the samsung logo appeared than a samsung.com logo followed and just looped. i cant go to any menu... cant get into hard reset or anything else!!
View 4 Replies View RelatedMy Droid Bionic is eating a big bowl of boot loops and i cant get out of it. im rooted and was trying to restore my phone as i had installed android 4.0.3. and during the process i accidentally removed safestrap and im stuck in the boot cycle. it shows the bionic boot logo then goes back to where it says : Droid" and then it repeats. i cant boot into recovery either.
View 3 Replies View Relatedi'm having with my new lg g2. I rooted my device and tried to install paranoid android and when i rebooted the device it just started repeatedly flashing the LG logo and will not start up. I cannot do a factory reset because it just reboots when it starts and i'm back to square one.
View 11 Replies View RelatedRecently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
View 4 Replies View RelatedI just installed the Android Revolution ROM for my phone, and I am now unable to get past the boot screen. I've been sitting here waiting for it to boot for 1/2 hour, before I took the battery out and tried booting again. Waited 1/2 hour again. Still no progress.
I had just made my phone S-OFF with SuperCID, and had flashed a new radio.img to my phone as recommended in the thread. After doing that, I went and used SuperWipe, and then I installed Android Revolution. Installation encountered no errors, so i was surprised when I was unable to boot.
I can still access 4ext recovery luckily.
EDIT: Wanted to point out that I was able to boot into my old rom after S-OFF, SuperCID and radio.img, but not after installing revolution rom.
So I was trying out the CM7 for xperia arc by the freexperia team. It was epic. so i also tried the CM9 release by them..
-> I downloaded the CM9 anzu for my arc S
-> Extracted the files
-> Used fastboot to flash boot.img
-> And then: fastboot reboot
Instead of the FreeXperia splash screen welcoming me.. i was given a black screen.. The phone does turn on.. but then there is nothing. No splash screens. nothing.
Is there anyway to boot straight into CWM?? recovery?? Did i brick my phone for good?