General :: Odin3 And MD5 File?
Oct 19, 2012Where do I put md5 in Odlin3? Is it under PDA?

Where do I put md5 in Odlin3? Is it under PDA?
I'm currently trying to root my GT-P7510, this is my first attempt at rooting.
I've been following a guide on androidauthority.
It all goes swimmingly until Odin3 hangs at SetupConnection.
So far to try and rectify this problem I have reinstalled the Samsung USB drivers and have tried using different versions of Odin3 (v1.85 and v1.87) all to no avail.
I'm running Windows Vista in VitualBox on Ubuntu 12.04.1 LTS and have checked all the relevant settings and Windows can acess my USB ports/connected devices so I'm confident that it's not a problem with VirtualBox.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
Sometimes when I try to install custom roms with odin3 I get a Microsoft Visual C++ Runtime Library error. It always says: "This application has requested the Runtime to terminate in an unusual way. Please contact the application's support team for more information". Right now, I am trying to flash a custom rom and it is giving me this. Do I need to change something in the data.img or something?
View 3 Replies View RelatedI had d/l this firmware in Zip form.I tried using the Odin3 1.52 to flash into my phone / copied it into SD Card by using recovery mode to do it.failed.Can anyone tell me how to do this upgrade cos' I cannot using Kies to get any upgrade outside USA.
View 3 Replies View RelatedLet's say you don't have internet access at the moment. Let's say all you have is fresh install of CyanogenMod 9, which for some reason, does not come with a File Manager :
Let's say you have an apk file on your SD card. How would you install the apk file? Terminal emulator, using which commands or another way?
By the way, ASTRO File Manager vs. ES File Explorer, which one and why?
I'm using JB 1.4.2 on Razr i. There's one thing that's annoying me a lot. I've installed the SNES Emulator SuperGNES and I've found that every single file type that have no app associated is showing SuperGNES icon and associated with it. Example: .log, .db, etc. Even files that have no extension is associated with it. The same problem occur when ZArchiver is installed. I don't know if it's a bug of these two apps or Android's in general. Remembering that this associations are shown only inside Android's native file manager. It's like every "unknown MIME type file" act like being the same.
View 6 Replies View RelatedI cant copy big compressed (.zip, .rar) to my sd card. The item successfully copied but end with corrupted file (crc). I tried to fix with some software on net. But the is no can fix instead showing no problem. HY5001
View 1 Replies View RelatedI just loaded the Android Update on my tablet. Why when I opened my email file all of my emails were removed from the emial file. where did they go?
View 1 Replies View RelatedIs there anything the Dalvik VM supports (in terms of bytecode) which is not used currently because the .class files don't have it?
As an example, if people would write their own Source-to-DX converter for their functional language XYZ, would they be able to implement e. g. full tail calls although the .class file does support tail calls only under certain circumstances?
I am successful in creating file using openFileOutput(). and can read the file using openFileInput().
I am able attach file from external storage sdcard while emailing the same using getExternalStorageDirectory as sendIntent.putExtra(Intent.EXTRA_STREAM, Uri.parse("file://"+Environment.getExternalStorageDirectory()+"/ zibra.txt"));
But while trying to attach file from the openOutputFile stored area using sendIntent.putExtra(Intent.EXTRA_STREAM, Uri.parse("file://"+ getFilesDir() + "/zibra.txt"));, resulting emptied file emailing.
My file is stored in "/data/data/com.example/files/zibra.txt".
what is going wrong in it?
CODE:...................
We are suddenly unable to install our app on G1 developer phones with 1.6. Works perfectly on emulator. When installing the app we get:
Installation error: INSTALL_FAILED_INSUFFICIENT_STORAGE Please check logcat output for more details. Launch canceled!
And logcat:
PackageManage: Couldn't copy package file to temp file.
What does this mean? We checked that there is actually room enough on the phone.. We tried reverting the code to a revision that worked previously, but are getting the same error.
How to play video present in local file system (ex:in res/a.3gp) using VideoView .I am getting error as Video cant be played.Can any one help me in sorting out this issue?
View 2 Replies View RelatedI am trying to play file which is stored in SDCARD in emulator. I have Linux O/S. So i need to provide command in run configuration. I am providing following parameter.
-sdcard /usr/android/sdcard/mysdcard.iso -audio oss [i]
The following is my code to play file.
try { mMediaPlayer.setDataSource("/sdcard/test_cbr.mp3"); mMediaPlayer.prepare(); // Giving error. mMediaPlayer.start(); }
I have some reference data in a text file (~5MB) that I want to use with might android application.The file is of the format:
1|a|This is line 1a
1|b|This is line 1b
2|a|This is line 2a
2|b|This is line 2b
2|c|This is line 2c
What I want to know is the most efficient way (less memory, fast, size etc.) to use this file within my application.
a.) Should I save the file as a raw resource and open and read the whole file whenever I need a certain line.
b.) Should I convert the file to XML and use XPath to query the file when ever I need to look up a value
<!--sample XML -->
<data>
<line number="1">
<entry name="a">This is line 1 a</entry>
</line>
</data>
c.) Should I just copy & paste the whole file as a static string array in the application and use that.
[EDIT] I will also need to search this file and jump to arbitrary keywords e.g. "line 1a".
I have a large bitmap (say 3888x2592) in a file. Now, I want to resize that bitmap to 800x533 and save it to another file.I normally would scale the bitmap by calling Bitmap.createBitmap method but it needs a source bitmap as the first argument, which I can't provide because loading the original image into a Bitmap object would of course exceed the memory (see here, for example).Is there a way to read a large image file with 10MP or more and save it to a new image file, resized to a specific new width and height, without getting an OutOfMemory exception?I also tried BitmapFactory.decodeFile(file, options) and setting the Options.outHeight and Options.outWidth values manually to 800 and 533, but it doesn't work that way.
View 4 Replies View RelatedI have created the private signed keystore file using eclipse and i have released the apk files in android market website. after some days we got some issues from users and we have fixed the issues but i don't have private signed keystore file. while making the apk file i need to use previous version release used private signed keystore file. Is there way to get private signed keystore file from previous apk release file?
View 1 Replies View RelatedHow come this is the only file manager on the market (that I've found... I went through quite a few) that can open an HTML file from your SD card? I was a loyal user of Estrogen until I found that it couldn't.
View 2 Replies View RelatedI'm developing with Android 2.1 on a Nexus One with firmware 2.1 update 1. I'm using the RehearsalAudioRecorder class from here: http://rehearsalassist.svn.sourceforge.net/viewvc/rehearsalassist/ Code...
View 3 Replies View RelatedI'm writing a bitmap editor. Each document consists of about 3 bitmap layers and documents are, at the moment, saved as a custom file with a .bme extension. These files can be converted to standard jpg/png files by rendering each bitmap on top of one bitmap and saving the latter. I need some way for the user to be able to select .bme files they've created already. Is there anything in Android that can make this easier for me? The only option I can see is to write an activity that creates a list view and write a list adapter that looks for .bme files on disk i.e. a copy of the standard "Media Gallery" app that works for my .bme files. The list adapter will either have to generate a thumbnail preview of the image to show to the user or I'll have to package such a preview in the .bme file when they're created. This is the only option I can think of. I thought I'd ask in case there is more Android friendly way of doing this. For example, can you add custom file support to the "Media Gallery" app?
View 1 Replies View RelatedDoes the X use a FAT32 file system? Is there any way to change this? I'm asking because I have a 4+GB mkv file I want to put on it, but I'm getting a message telling me its too large for the file system. If no way to change, then can anyone suggest a way to make this file small enough to fit?
View 11 Replies View RelatedI accidentally deleted the AndroidManifest.xml from the Package Explorer panel. The file still exists intact in the original directory but I cant find any option in the Eclipse ide that seems to be for restoring it. I thought it might be 'Import' but manifest isnt one of the types on offer. Can anyone suggest how I can get the file into the package?
View 1 Replies View RelatedIn Reference to this android file download problem http://stackoverflow.com/questions/576513/android-download-binary-file-problems
Can anyone explain what does this line mean in the code FileOutputStream f = new FileOutputStream(new File(root,"Video.mp4")); And what does it mean by the parameter root within the File(). Do I need to specify the root path to save the file? if it is the case then how do we specify the root path in android. Code...
I'm a novice user writing my first android application. I have the need to upload a file to a webserver from the device. I googled enough before joining this forum and not at one place did I find a suitable solution. I would like to know how to launch the file browser when user clicks on the "Browse" button to upload a file.
View 3 Replies View RelatedI currently have a i9001 using Android 2.3.3 with baseband version I9001XXKF8 and am planning to flash with the newer I9001XXKQ1 version since there is no official 2.3.6 update for my region.
My current firmware I use has the South African CSC files(I9001OJCKF3) but the newer firmware uses the German CSC(I9001DBTKP1). My phone is not sim-locked.
If I flash to the newer firmware would that 'brick' the device? If I backup my current CSC files from /root/system/csc would I be able to restore these onto the newer firmware? If so would replacing these require factory reset or any such thing?
These are my CSC files: [URL]
I have been at this for hours, but to no avail. I have been trying to root my GS2 with CF Root, but I can not get the tar file, instead, I see a zImage file. I am not extracting the tar to get the zImage. The zImage is what is there originally. I have tried multiple sources of CF Root, but get the same problem.
Edit: Figured it out, nvm
I has project in the security of android and haw its safe The doctor ask me to read history of Facebook chat and find the location of my friend from that I fast been rooted my device and copy database file of Facebook chat history and read it in the computer by SQLitviwer program.
Also try to open by any program direct in the phone but I can't finder any program for that except SDK packet and use command line.
My question about command that use to root android using SDK and open history file of Facebook chat in my Galaxy S.
Witch command I can use for that? Its same command use in DOS ?
Actually I want a android software which can easily modded xml file easily in a apk. My pc is dead so i need software which work in my neo v using jellybean 2.4.
View 2 Replies View Relatedi accidentally deleted my play now store can any 1wit a rooted sony ericsson send me an apk? I use the wt19i live with walkman.
View 3 Replies View RelatedI've downloaded several android apps and when extracted the file is an .exe (windows) file instead. This is more common than I like. I download my apps from my usenetserver. What, if anything, can I do with these .exe files to get them installed on my android device?
ASUS Transformer Pad TF300T
How to modify .xml file which editor on mobile and pc work for that
View 4 Replies View Related