I've been unable unlock the bootloader of my htc glacier I've tried htcdev but the ruu update is telling to get a utility software for my device. I've also tried htc bootloader unlocker (one click unlock) but its not finding my device
GLACIER PVT SHIP S-OFF
HBOOT-0.89.0006
MICROP-0429
RADIO-26.13.04.19_M
eMMC-boot
Jul 15 2011, 16:45:17
View 7 Replies
how to install a Rom on a HTC Glacier..
I Have a Mytouch 4g Glacier
Android Version 2.3.4
Software Number
2.32.531.1
Baseband 12.62.60.27U_26.13.04.19_M
Build Number
2.32.531.1
Kernel 2.6.35.10
WHY IM INSTALLING A ROM?
The awnser to the question is simple i have a problem with my Signal, the internet of my cellphone is 2G doenst go to H+ why, dont know and no one have the awnser to that... beside that i only have 1GB of internal Space.. and should be 4GB So thats why i decide to install a Rom and if there is a way without ROOT.
My friend is on CM7 for the Evo 4g. He wants to know if there's any way to increase how long the lock screen stays lit up before it sleeps again(like when you light it up to check the time). I've personally never seen any option for that before, and honestly never cared about it but now I'm curious.
Where or how to change that setting? I'm not adverse to modifying a few system files here and there if necessary.
I'm trying to run TripNDroid ROM (check here), but currently that ROM on 4.2.1 doesn't support my HBOOT, 1.12.
I checked me CID, which is HTC_304, and I see it is compatible with HBOOT 1.39.
Now, I read somewhere that if I update to a more recent HBOOT I might not be able to flash some ROMs only compatible with older HBOOTs. So, should I update my HBOOT or not? If so, how?
is it possible to set up a Hboot password, or if currently not, is it achievable? We all know the PC's BIOS can be password protected, and Hboot is rather like Android BIOS.
The reason Im asking is that since almost all new phones have sensor keys for menu, back, etc (instead of physical buttons), that cannot be used during boot, a thief who wants to install a new ROM on a stolen device can go only through Hboot with power/volume down, instead of jumping straight to recovery (power/menu) or fastboot like on my old MT3G, for example. Therefore, a Hboot password option would make stolen phones extremely difficult to crack, and would require way more than just average user knowledge how to flash a ROM.
how to downgrade Evo 3D HBoot 1.50? I have downloaded HBOOT_Downgrade_Toolkit.i686-0.5.1.iso and already burn onto CD.
View 2 Replies View RelatedI've had an HTC Inspire for about 8 months now, with very little problems except the occasional frustrating frozen screen or two. A few months ago, I noticed that my "volume down" button wasn't working, so I would just manually change the volume through my settings. It wasn't a big deal, just irritating.
Last night, my phone was working just fine. I even remember waking up in the middle of the night and answering my texts.
This morning, I noticed it was turned off, so I attempted to turn it on, and it wouldn't work. Thinking it was dead, I plugged it in, got the "charging" screen, and attempted to turn it on again.
I got sent to the hboot screen. Unfortunately, it is not responding to the buttons being pressed. I've never rooted my phone, so I'm pretty sure this is all due to my volume down being stuck (and therefore hard resetting when I press "power.")
Is this fixable to the extreme novice (which I'm assuming it isn't)? Or, if as an AT&T customer, will they give me a replacement, or is this beyond their realm? I know when I lost my battery cover once, they wouldn't give me a new one and said I had to go to HTC.
How can I unroot my evo 3d (CDMA) Hboot 1.58 ICS? I have sprint with the MeanRom
I DONOT Own the phone, I unlocked it, and its not mine, I got a 2 year contract and I was very stupid doing this.
P.S My phone has CWM Recovery S-On
Should I be able to find my adb device while my phone is only booting to HBOOT 0.93.0001?
Been stuck on this for days...and it's killing me!
PS. When I plug my phone in to
PC it says "Android ADB interface installed" "Ready to use"
But when I cmd the adb to find devices "adb devices" it shows blank
P.S. Phone: HTC Desire
Unrooted
S-ON
Unable to boot, can only get to HBOOT.(so cant turn debugging on)
Trying to get a goldcard to flash a new rom and see if i can unbrick
Reason for unable to boot is - It had been rebooting itself for weeks, slowly getting worse, until now, when I cant get it booted at all.
My phone got a fair bit of water in it and after drying out, it powers up to the HBOOT screen but vol up/down do not work nor does any other button. Curiously enough the phone seems to recognize if I insert the usb plug but my computer says failed to recognize device/load drivers.
This is what the screen says:
INCREDIBLEC XC SHIP S-ON
HBOOT-0.92.0000
MI CROP-0417
TOUCH PANEL-ATMEL224_16ab
RADIO-2.15.10.07.07
Jul 23 2010, 18:06:51
HBOOT or if USB in HBOOT USB PLUG
<VOL UP> TO to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
FACTORY RESET
Putting jelly bean on nexus one
My Phone
Nexus One
CM7.2
hboot 0.35-0017
My Problem
Upgrading hboot. I've looked into the other posts. But in none (that i have looked at) they do "fastboot flash hboot". Maybe it's just the same?
I'm just following everything step by step (link)
Code:
$ fastboot flash hboot hboot_jellybean_260-8-168.nb0
sending 'hboot' (512 KB)...
OKAY [ 0.095s]
writing 'hboot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.219s
My bootloader is already unlocked. Might it have something to do with read/write permissions?
I have an HTC Sensation which I recently bought and seems not to get onto any Wifi Network. It pops out with Out of Range Message.
View 1 Replies View RelatedI was curious about this myself, and i have seen numerous post about this on the forums complaining about having to unlock with the top button
I searched about nexus since it is similar and saw a few things about the app LOCKBOT, i recommend you atleast try the free version and see, it gives you unlock with the trackpad button and the ability to do custom lockscreen with different styles like Iphone, and different android locks. THis was one grip i didnt like about sense. Stock Android has the ability to swipe to unlock or swipe the other way to mute sounds, which is a nice feature, although i prefer my iphones switch the best
The bad...Ive read stuff about it crashing and being laggy, now i havnt experiended this on the INC, it runs super smooth. But i have been having a few times where the front button will not unlock the phone, maybe an update will fix this or something, but its worth a shot to look at.
I've entered a wrong pattern too many times. The phone now asks for my gmail username and password. I tried to enter them, but it doesn't accept the credentials. They are certainly valid, I know because I logged in via web browser with the same name/pass and it works.
View 6 Replies View RelatedThis is for an EVO but i'm thinking maybe it'll be similar to other android phones. what i'd to set up is to have the phone require the 'dot unlock pattern' after it's been sitting for 5 minutes idle. when i set it up with AutoLock, whenever the screen turns off after 1 minute, it'll rqeuire me to do the slide down to unlock which i don't want.
View 1 Replies View RelatedIs it possible to do this yet? I really want to try the new Desire HD Rom and with the current software i dont think im able to root, therefore i would need to downgrade my HBOOT??
View 14 Replies View RelatedIs there anyone that can give me step by step instructions on how to use hboot to install files from the root directory on my sd card. Ex.
This is what I did: I downloaded Clockworkmod 2.5.0.5, renamed the Clockworkmod zip to PB31IMG.zip, and placed it on the root of my SD card. Power-off, and boot into HBOOT (pressing the down vol+power button).
Then I downloaded Superuser 2.3.6.1 and place it on the SD card, use Clockworkmod Recovery and choose "Install .zip from SD" option.
Restarted my phone, and there's Superuser."
I have tried going through hboot and never see these files once I have installed them on the SD card.
I have read conflicting things, so I come to the experts. My phone is on hboot 0.77 - is this OK to install the OTA 2.2? I have read that 0.77 may send the phone into an endless boot loop if you install Froyo.
View 6 Replies View RelatedIn my attempt to install the MUIU Rom I am having trouble upgrading my Hboot to .92. Ive downloaded it from various links provided, put it in the root of my sd, rebooted into hboot, waited, saw it check the PB31IMG.zip.....then nothing. It doesn't prompt me to do anything....
View 5 Replies View RelatedIm having some problems with my desire.. my phone is presently in a htc white logo > reset > htc white screen logo > reset loop of doom... I can load up my hboot menu but that is about it.. If i try and select recovery in hboot it just resets the phone back into the htc white logo > reset > htc white screen logo loop.. somebody has suggested that unrevoked scewed up somewhere along the line and to install the RUU but windows isnt even recognising it as a USB drive in hboot...
View 7 Replies View RelatedI got my eris 2 weeks ago so 2.1, and it has hboot 1.49 (can someone tell me wht that is/means?) was already on it. I've found out that the hboot is why I can't root. Has anyone came up w/ a workaround yet?
I only want to root to be able to use the Eris as a hot spot for my itouch, so if there is another way to do that.
When tryign to extract the hboot drivers from unrevoked, i get an error stating that an unexpected error is prventing me from copying the file. the files that wont copy are:
View 1 Replies View RelatedWhat does boot into hboot mean? Is it just powering off the phone then holding down the volume button and press power? If so then can someone explain to me when I download a called PB31IMG.zip and put it into my sdcard then boot my phone up it does not say anything about an update. For instance, I want to update my radio from 1.00.03.04.06 to 2.15.00.07.28.
View 3 Replies View RelatedSo, I downgraded to stock recovery to get the OTA2.2, I had problems doing so, but finally was able to get it to be stock recovery with s-off and running HBOOT .79, would I need .77 to get the OTA or no?
View 25 Replies View RelatedOk this may possibly be the dumbest question asked, but how do you tell what your Hboot is? I see people saying that with 1.49 you can not root, but I rooted my phone and for some reason I remember seeing 1.49 on my phone somewhere but I can not remember.
View 12 Replies View RelatedA leak has never touched this phone.
Imagebin - A place to slap up your images.
PB000IMG.zip fails.
Every Google hit returns a dead end because no one answers the poster with a Main Version is older! failure error.
When I reboot in recovery, it looks like my HBOOT version in .77. Someone in one of the threads mentioned that .77 and .79 were floating around as the safe options. How can I upgrade HBOOT versions, and with everything running fine, is there any benefit to upgrading? I'm running unrevoked forever, second wave rom, and newest radio leak if that matters.
View 4 Replies View RelatedI have been messing with my eris. I held the power and send button and as usual it checked the leak file and asked if I wanted to update. At this time I noticed a list from one to four., one thing that was listed was bootloader and another was hboot My question would there be a way to get into the 2.1 leak file and some how switch the hboot and bootloader in it with the hboot and bootloader that is on the official ota file or some other jnoot or bootloader. Then convert it back to a zip file and reinstalling it like out was a v4 leak. Sorry if this was a stupid post but just trying to help leak users or devs brainstorm a little.
View 5 Replies View RelatedI am tryibng to downgrade my Hboot from 0.93 to 0.8 and am following this guide:[HOWTO] Downgrade Froyo (2.2) to Stock 2.1 (ANY HBOOT | WIN/LINUX/MAC | ROOT) - xda-developers The reason I amn doing this is because with Unrevoked I get a Validation Error Backup CID Is Missing or words to that effect.I understand that downgrading to an earflier Hboot version would make Unrevoked work and I can then root my htc desire.This is where I have a problem:
Checking misc partition
/data/local/mtd0.image: ok
CID retrieved: H3__001
Modifying misc parition image
Flashing misc partition... mtd: not writing bad block at 0x00000000
error writing misc: no space left on device Flash complete If any error ocurred here, press ctrl-c and run this utility again this I assume is talking about the little space i have ont he phone itself and not the sdcard as I have tried 2 sd cards. I did a factory reset, created the gold card and went throguh the process several times.If I let it go and carry on it goes through a few more things before it finally finishes. Then it reboots my htc desire and a white screen with skateboarding androids shows up, from there in the instructions it tells me to push up for flashing if i do that it goes to the nerxt option which is sim lock and I dont think that is what it is meant to be.If I boot into reocvery the phone freezes at a screen pic of the phone with a gtriangle and exclamation mark and so I take the battery out and reboot that way. Please can someone explain where am I going wrong here?
Windows 7 x64
Android 2.1
Hboot 0.93
OMG my desire wont boot up right!it shows the white screen and htc but it just stays there and i cant get into the HBOOT to reboot i always have to remove the battery to kill it. any help?? plus the phones hot should i just fully let it charged while it is off?
View 1 Replies View Related