How to Replace the ok / Home in recovery?
because the ok / home I do not work!
like Samsung tab no buttons his home
ok button / his home was replaced with a volume ...
View 1 Replies
When 2.3.5 update on Samsung Galaxy S finally arrived, I've rooted my phone as seen on androidadvices.com. This version is not stable so I wanted to go back to stock ROM but in the mean time my HOME button stopped working.
So, there I was, not able to go to download mode to flash stock ROM. Than I googled that you can go to download mode through adb and I did and flashed backed stock ROM.
AND THEN, IN AN ACT OF ABSOLUTE STUPIDITY, I'VE GONE TO RECOVERY MODE THROUGH ADB.
And now I can't get out. My phone is working, software is ok, only HOME button is not working. ADB dont see phone any more and phone is always rebooted in recovery mode.
My matter is that the Home button in recovery mode isn't working so i can go up and down with volumes button but i can select nothing,
View 4 Replies View RelatedI had a problem with my old Vodafone Smart II phone Alcatel V860, and I put another original ROM on it. Everything was fine. I rooted also the phone, not a problem. But when I went into recovery mode I noticed something weird, only my volume keys up and down are functional to make selections in TCT recovery console, but not also the select button (the home button). This worked before! I also noticed much more options in the recovery console than before, but what good? I can't select options from the recovery menu whatever I do, just navigate through them.
View 2 Replies View RelatedMy home button was broken.I can boot to Download mode via JIG USB only. When my phone bootloop.One way to fix it ,is flash a new ROM using Odin Have other way?
View 1 Replies View Relatedmy galaxy s2,it is rooted,and i have another problem : the phone restarts by itself and gets stucked in the boot loop, i never flashed a new rom ,it is running the stock rom,Someday i needed to factory reset the phone so i rebooted into recovery mode (power + home button +vol up) ,. I booted into recovery mode but the power button does NOT react as 'select' button although it works just fine for power on and off. I select a function and press [power] an the first line becomes the selected. pushing it again just flashed the screen. But pressing it long turns the phone off,and even after the factory reset from phone directly(with out going to recovery mode)
View 5 Replies View RelatedMy galaxy k's home button has been broken. And i wannted to use recovery.So I attached it with my computer, used cmd(adb reboot recovery). After that i was able to go in recovery. But after that I couldnt reboot it. I tried to use cmd. But it cant find my device.
View 2 Replies View Relatedi have successfully ported CWM Recovery to my ZTE Merit/Avail/Roamer using the CyanogenMod gingerbread source (i did not use the unofficial port that was built from the ZTE Blade because the screen is upside down)
everything works just like it is supposed to--absolutely flawless. build went through without a hitch.decided that i instead wanted to use the "home" key to select menu options in the CWM Recovery instead of the "power" button that is default (had to uncomment BOARD_HAS_NO_SELECT_BUTTON in the BoardConfig.mk because there is no camera button on this phone)
so i copied the recovery_ui.c from the working Blade source (which uses the "home" key instead of the "power" key), placed it into my ZTE Roamer (Merit/Avail) source and added BOARD_CUSTOM_RECOVERY_KEYMAPPING := /device/zte/roamer/recovery_ui.c to my BoardConfig.mk
there is no problem reading the location of the file so don't suggest to change it..but when i compile i get these errors and it is not built
Code:
prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/../lib/gcc/arm-eabi/4.4.3/../../../../arm-eabi/bin/ld: out/target/product/roamer/obj/EXECUTABLES/recovery_intermediates/recovery.o: in function get_menu_selection:bootable/recovery/recovery.c:470: error: undefined reference to 'device_handle_key'
[code]....
who is not some novice that knows nothing about building a recovery.img from CyanogenMod source, i can use the home button instead of the power button. is there any easier way to change this than by using a custom recovery_ui.c?
Friends of Jupiter Huawei g525-u00and have been asked Ram Kastvm able but Alanmshkl. Already green screen after power ... not that fast boot mode will not go into recovery mode and not the original ROM using loam bottom half Vbala White gets going
View 5 Replies View RelatedMy phone was working just fine and randomly the lock button stopped working and the home button brings up the power screen!
View 1 Replies View Relatedi update ics in spice mi355 bt in my phone status in about phn only 2.3.6 only show it bt looks are change.and menu button change to option button clockwise.hw do i knw whther ics change in phn or nt?bt file is download in our forum 1ly size is 90 mb.
View 1 Replies View RelatedI have a Samsung Galaxy S Plus where, after flashing CWM with Odin, and installing cm11, I'm stuck on an infinite boot animation. But that is not the big issue. I need to enter Recovery Mode, where I have a backup, but the problem is that my Volume Up button is not working, so I can't use the Power Button and Volume Up(I also don't know what could possibly wrong with it) one to get there. So I was wondering if there is some other method to enter Recovery, I suppose by computer. I think that when I used Odin, the device restarted being in Download Mode, and I think that it hasn't to be On to do that.
View 1 Replies View RelatedI guess as I rooted my att GS3 just fine and flashed a new aokp rom and was up and running but started to have intermittent flickering. It prompted me to reflash rom with CM10 and this is were my problems began. I wiped data/factory reset, cache partition,Dalvik cache, mounts & storage format cache, and accidentally format emmc which I think is my problem. I was able to still reboot to CWM recovery but I can't do much more than that, and now I can't get to CWM recovery mode at all. Have tried to boot and reflash from ex/sdcard no good. PC doesn't recognize phone to do recovery from backup and I didn't do internal backup which I now know was dumb. Is there anything I can do to get back up and running or did I screw myself and have to get a new phone?
View 1 Replies View RelatedI just rooted my Nexus S and it was successful.
However, now when I try to install Cyanogenmod I can't get into recovery?? When I go into bootloader, at the bottom it says "Fastboot Status - FAILInvailed Command". And when I click on Recovery, the Google logo shows up with an unlocked image below it. It flashes a few times and then reboots the phone regularly.
i have rooted my karbonn A7+ successfully after that i did a big mistake... i have flashed rom without CWM recovery..i did this=> opened power button + volume up key for recovery mode and applied direct rom through the option apply update from sd card in result i found that my mobile got stuck on boot animation.. after that i've cleared user data and wipe partition chache and now its showing BLUE SCREEN only .
View 1 Replies View RelatedI've just bought an Oppo phone (with MTK6589 chipset.) 2 days ago I decided to root and flash CWM recovery to my phone. Rooting gone well and the phone is now rooted. Then I flashed CWM with Mobile Uncle Tool. It said that I flashed sucessfully, I got no error. But when I reboot the phone to recovery mode, nothing happend, the phone just did a normal reboot! I tried to flash other third-party recovery mode such as TWRP and MIUI recovery but I got the same problem: the phone couldn't get into recovery. The screen with a text "Recovery mode" appeared in 3s and the phone just did a normal reboot. I couldn't even format factory, all I got was just a normal reboot. I even tried many tools on Google Play and MTK flashtool but there were no hope. Now my phone is working normally but can't get into recovery mode.
View 2 Replies View Relatedhow to enter Recovery Mode holding down volume up AND volume down and press power.
View 1 Replies View RelatedI Have Android MTK6575 with Android 2.3.6
its called " G-TiDE E60 "
before doing anything , when i enter the recovery mode it shows a picture of an Android and a Triangle next to it " Which should be the background image of the recovery mode " and there's no menus or anything , nothing appears even if i press power or volume buttons
So now after i rooted the phone , installed another recovery.img with MobileUncle , it just keeps stuck on the phone's logo and doesnt even show that triangle picture and it doesnt show anything but the phone's logo
I tried a lot of different recovery.img files but none worked, Then I tried a recovery img that worked for another guy who has the same mobile kind , it worked for him but didnt work for me
Even after flashing it with MobileUncle , still i get the same problem..
All what i edited in the root files was the boot sound and animation and i even restored the stock ones back and still the same problem
and the last_log file in System(Root)/cache/recovery Includes this
Starting recovery on Tue Oct 15 04:49:44 2013
framebuffer:
0 /Imp rarrellsk (null) (null)
1 /boot mttl boot (null)
2 /cache yaffs2 .cbe (null)
3 /data yaffs2 user.. (null)
4 /mlsc mtd mlsc (null)
5 /recovery mtd recovery (null) /scl.rd vfat /clekeblack/mmcblkOpl /clekeblaclUmmcblk0 7 /system 540s2 system (null)
PS : Oct 15 is the last day i ran the stock recovery that only shows up the background image of recovery .. So all the recovery runs after flashing new recoveries till Oct 23 arent logged in last_log..
I want to make a clean hard reset of my GoClever Tab R974.2 but no matter what I do it won't load the bootloader. I tried all pssible combinations of all 3 abailable buttons (power,vol+,vol-) and all possible pressing times from a few seconds to a minute.I also tried rebooting into bootloader via the ADB but without any luck (device not recognized).My main problem with this system is that I tried to root it and it seemed like it worked, the superuser .apk was installed, however when I tried to start Titanium backup or any other prog that requires root access, it shows that there is no root access. Then I also tried z4root, but no luck either and SuperOneClick just freezes when restaring the ADB daemon.
View 1 Replies View RelatedI got the root for the Panasonic P-01D then deleted many preinstall app, such as launcher and android keyboard,so don't have any launcher and keyboard after reset the phone(wipe phone data).Now only can connect the phone to adb in recovery mode, because no root and launcher to open the usb debug.Can i install any launcher to phone in recovery mode by using adb?
View 9 Replies View RelatedNeed rooting my gooapple 4gs. I have tryed everthing. And i can't access the recovery mode. volume key + power, dont work.
View 3 Replies View RelatedI've got an a31 allwinner device. (novo 9 spark)After having rooted it, i can't exit from recovery mode: adb device shows me a number and recovery...And the tablet doesn't want to boot normally.
I can't use phoenixsuit, because it's now not recognised by the pc (recovery mode).
I was rooted and decided to unroot for giggles. After i did I went to root again and now I am getting this: "E: cant open/cache/recovery,command " When I reboot into recovery mode.
View 4 Replies View RelatedJust FYI in case anyone wants to know: For download mode, with the phone turned off, fold the number 1 key on the QWERTY keyboard and the power button simultaneously For recovery mode, with the phone turned off, hold Volume Down, CAmera, and Power simultaneously. You navigate with volume UP/DOWN, select with HOME, Menu toggles to "Manual Mode", whatever that it.
View 3 Replies View RelatedI have an Android tablet (Diablotek D2-721, very cheap I know, but it serves its purpose) that is stuck in a boot loop. The real problem here is that this device apparently does not have any sort of recovery mode and being in a boot loop means it does not get recognized by ADB or any firmware flashing software.
I researched all day yesterday perusing forum after forum but almost every single solution requires booting into recovery.
I recently rooted my LG Optimus L3-8C (E400) running stock rom and version 2.3.6 Gingerbread (yuck) and I followed all the instructions from this video:
in order to flash the CM9 ROM. Problem is I can NOT reboot into recovery no matter what I do it seems. When I try tp reflash the CWM recovery it tells me "successfully installed!" then when I press 'reboot into recovery" it gets stuck on the LG logo for so long I often have to hold the power button to go back to my device. I even download "recovery flasher utility" found here [URL]....but, whenever I run the app it tells me "no recovery.img" found onexternal SDCARD even though I placed it there! I tried to fastboot but whenever I run CMD it tells me " 'fastboot is not recognized."
My EVO 3D (Sprint) is rooted and is on android version 2.3.4 and I believe it's not an android official release, this is how it was given to me. I'm trying to install CM10.1
I installed ClockworkMod 5.0.2.0 using ROM Manager and since then I haven't been able to boot into recovery mode. I can get into bootloader but not recovery. I've tried powering it on with the volume button down, using the recovery reboot option, and tried using "Reboot into Recovery" in ROM Manager, but I keep seeing the same thing. It boots with the HTC logo then goes black then at this point i believe I should be seeing recovery mode but instead I see the HTC logo again and then it just boots like normal. Is there something I did wrong and is there a way to get recovery to work again?
I have a Samsung Galaxy S2 SCH-R760.Tried to update phone from standard IceCreamSandwich to Jelly Bean via Samsung provided Simple Upgrade Tool. Very new to flashing phones, forgot to check model number, first attempt failed. Eventually got the right one (difficult to do with my model apparently), and the mobile network wouldn't work. Was told to reset APN, could not find it anywhere in the system.
Got fed up and decided to revert back to original OS, which failed. Waited overnight (it was late) with the phone off. Found the right file (just going to go back to Jelly Bean), however whenever I attempted to get into recovery mode it told me there was not enough power and to charge the phone. Phone was plugged in, this happened a couple of times. Now after the phone has been plugged in for well over 3 hours I cannot get the phone to power on or anything, it absolutely will not respond. Attempted to use Kies, will not recognize my phone model and is waiting for the phone to be connected anyway. When plugged in (trying/using various different cords) I have a little faint blue light flashing in the top left corner of the phone (not the phone screen).
The phone has been in excellent condition up until this point, and I have little reason to believe that my battery just suddenly went 100% bad after showing no signs of decay in recent weeks.
I tried to upgrade my P3100 to Slim-p3100-4.2.2.build.6-OFFICIAL following the tutorial i found.
Result of this is that now tablet is non more able to enter either CWM recovery nor odin download mode and after normal boot i can only see a flashing Slim logo on the right part of the screen.
The best i am able to obtain is a "forced upload by key pressing" screen rebooting with all three buttons pressed.Odin can see the device but when i try to re-upload cwm is stits in Establishing connection.
I have a Galaxy S Vibrant i installed a rom and my phone crashed I'm trying to get into recovery mode pressing both volume buttons and power bottom at the same time but is not working. if there is another way to get into recovery mode.
View 2 Replies View Related