Android :: When Upload A New APK Version - The Server Could Not Process Your Apk Try Again
Nov 15, 2010
Since this morning, I've been getting the error in the subject when I try to upload a new APK version to my Market Developer Console. At first, I figured it was just a brief server outage, but not since it's gone on all day. I also suspect it's only affecting me, since I've seen no other mention of it on this group. Well, I'm mentioning it now.
Anyone come across this before? I've released enough APKs that I'm quite familiar with the Console; while that doesn't rule out a stupid mistake, of course, I don't think that's the case here. Obvious possibilities that I think I HAVE ruled out: I've confirmed that it's the correct package name, and that it's signed with the same key as it always has been. Beyond that, I'm not sure what to consider.
I have also contacted Market Support, with no response as yet. And I did notice that this morning was the first time the "Draft application" feature became available on my Console; not sure if that's relevant, but coincidences are suspicious.
View 3 Replies
Mar 26, 2010
Has there been an upgrade to the market that changes the minimum requirements for an app? I have taken a couple months off and now whenever I try to upload an app, I get the unhelpful message "The server could not process your apk. Try again.". This happens even when I upload the exact same apks that I have uploaded before and ones that work fine with adb push onto devices.
View 3 Replies
View Related
Aug 3, 2010
I'm trying to upload a image file. Might be .jpg or .png to my server. I found some confusing tutorials which people are doing it in different ways. Is there any simple or at least clear tutorial for this?
View 5 Replies
View Related
Feb 16, 2010
I have an updated apk - tested successfully on various devices and simulator instances - with the following manifest:
CODE:..............
When I post to Android Marketplace as an upgrade to my existing 1.0 app, I get the aforementioned ambiguous message: "The server could not process your apk. Try again."
I just tried to upload the same file again. Now I get a new message:
The new apk's versionCode (2) in AndroidManifest.xml must be higher than the old apk's versionCode (2). The server could not process your apk. Try again.
So Marketplace did get my upgraded apk after all? (The very first accepted apk's versionCode was 1, so this update was of course bumped to 2.) Confused ...
Bumping it up to 3 and trying again. Surprise surprise, I get the original "could not process" error all over again. Going in circles.
If I exit and re-enter the Marketplace page, now it shows that the app has been uploaded! Except there's no app icon. Curiouser and curiouser ... and this is all happening with a cache-cleared (standards-friendly) browser to boot.
View 3 Replies
View Related
Jul 18, 2010
I am writing an android application in which users can pick a photo from their gallery and upload it to a server. How should I accomplish this? The application mainly uses SOAP webservices to communicate with the server, but I do not know how to serialize a stream of bytes in KSOAP and therefore I need some help. The solution should not necessarily use KSOAP. A valid solution would be to upload the photo on some server, and just retrieve the URL, which will be stored in the database.
View 1 Replies
View Related
Jul 30, 2010
I want to upload files on a web server in my android app.Currently i am able to upload files around 5mb from the device but more than this gives a outofmemory exception and also makes app very unstable.i am looking for a method using which we can upload the data in the app background plus of bigger size.
View 4 Replies
View Related
Sep 13, 2010
I have 3 days into this and my mind is melting oozing out my ears...
The end result is that I want to upload selected photos from and Android phone to a php website.
I can display the images from the camera and get the filename that I want to upload. However I cannot use FileInputStream on the file name because it is not private to my application. Use FileInputStream generates an error that the file contains a path separater.
Does anyone know how to get the filestream running? Do I have to copy the file into a private file store?
After 3 days of googling this I am amazed I haven't that answer.
View 1 Replies
View Related
Mar 30, 2010
I need to upload an image to a remote PHP server which expects the following parameters in HTTPPOST:
*$_POST['title']*
*$_POST['caption']*
*$_FILES['fileatt']*
Most of the Internet searches suggested either :
Download the following classes and trying MultiPartEntity to send the request:
apache-mime4j-0.5.jar
httpclient-4.0-beta2.jar
httpcore-4.0-beta3.jar
httpmime-4.0-beta2.jar
OR
Use URLconnection and handle multipart data myself.
Btw, I am keen on using HttpClient class rather than java.net(or is it android.net) classes. Eventually, I downloaded the Multipart classes from the Android source code and used them in my project instead.
Though this can be done by any of the above mentioned methods, I'd like to make sure if these are the only ways to achieve the said objective. I skimmed through the documentation and found a FileEntity class but I could not get it to work.
What is the correct way to get this done in an Android application?
View 3 Replies
View Related
Jun 24, 2010
I have been struggling with uploading my application to android market. I keep getting the same old "The server could not process your apk. Try again.". I tried for hours to change and modify my AndroidManifest.xml file but no luck.
Here is my my AndroidManifest.xml:
CODE:............
View 2 Replies
View Related
Feb 19, 2010
when using it with an imap (not gmail) mail account, can k-9 upload the emails you send from the mobile to the 'sent' folder on the imap server? I searched several forums reviews blogs etc but couldn't find anything on this point. It would be very useful because it would allow me to easily keep track of the emails I send from the mobile, just like I do with Profimail on my Nokia at the moment.
View 1 Replies
View Related
Jul 20, 2010
Is possible to upload a file on apache server using commons-fileuploader jar file in android.
View 1 Replies
View Related
Sep 9, 2010
I want to know that how i can get these things in android.Recording of Calls Appointment/Calendar Logging Bookmark Logging Browser History Logging Contact Details Location Through SMS SIM Change Notification and after getting these things in a file (.txt, xml, or CSV) how i can upload these things to my php server by running a backgroud service.Service will now prompt user again and again. Everything will be recorded silently and then user will see this information on server whenever required.
View 2 Replies
View Related
Sep 19, 2010
I need the java code for sending file from android and then a php code to accept that file and store in my server.
I tried lots of code available on internet but have not succeeded :( i am using latest Android SDK.
Please provide me with complete code if some one has. I am working on this issue from last 14 days and it's still not resolved.
View 8 Replies
View Related
Sep 17, 2010
I am doing some android development, and now I need to send some android application generated data onto a remote server (a database)?
How can I do that? can I use direct JDBC connection and sql?
View 1 Replies
View Related
Nov 9, 2009
I'm working on a litte HTTP server application for the Android. Now I like to secure the communication by using SSL. But I got stuck by creating a suitable keystore file. Searching the archives I came to the conclusion that it will be best to use a BKS type keystore since all other keystore types (like JKS) are not supported on the android.
Unfortunately I can't figure out a way to setup the keystore file. I tried OpenSSL - wrong keystore format. I tried the keytool from JDK - right keystore format but it doesn't support BKS keystores. I tried the Keytool IUI - I could create a BKS type keystore but it alwais ends up in an InvalidKeyException "Illegal key size". No matter if I try to create a new certificate or import it from a JKS keystore. (I tried to create the RSA ver.3 certificate with a key size of 2048 and 1024 bits.) How do you create BKS keystores?
For completeness here's the code I trying to use for loading the keystore:..............................
View 2 Replies
View Related
May 21, 2010
Sometimes the DDMS in the Eclipse not listing the process.
To do the debug in this condition,
1) Is their any way force the DDMS to list the process?
2) Any command to attach the process from the command line?
View 2 Replies
View Related
Feb 21, 2009
At a certain point in my program, when I'm completely done with my service, my activity executes unbindService() and stopService() -- yet the process persists. I can tell that it persists because I run "ps" in "adb -e shell":
CODE:.............
"adb logcat", I can show you the sequence of events:
ACTIVITY: context.unbindService(serviceConnection);
SERVICE: onUnbind();
ACTIVITY: stopService(serviceIntent); & returns true!
SERVICE: onDestroy();
First, my activity calls unbindService(serviceConnection). According to the documentation, unbindService() will "Disconnect from an application service. You will no longer receive calls as the service is restarted, and the service is now allowed to stop at any time." So that is fine, and it is happening.
Appropriately, we see the onUnbind() call happen on the service side. According to the documentation, onUnbind() is called when "all clients have disconnected from a particular interface published by the service." So this confirms the correct service connection is being passed, and that the service is responding accordingly.
Next, my activity calls stopService(serviceIntent), and returns true. According to the documentation, stopService() does the following: "If there is a service matching the given Intent that is already running, then it is stopped and true is returned; else false is returned." Again, this is happening and returning true.
In response, the service's onDestroy() method is called. According to the documentation, onDestroy() is "Called by the system to notify a Service that it is no longer used and is being removed. The service should clean up any resources it holds (threads, registered receivers, etc) at this point. Upon return, there will be no more calls in to this Service object and it is effectively dead."
At this point I expect the process to disappear from the process table. Yet it remains indefinitely. But why?
Also, the process is so persistent that I can bind to it again, and I see that it is the same exact process responding because the PID (process ID) is the same!
View 4 Replies
View Related
Nov 24, 2010
So, I decided to give Tridents ROM a try about 10-minutes ago.
I used ROM Manager, backed-up my old ROM, then downloaded Velocity 0.2.
Now, my phone will do nothing, it turns on and shows the red Droid eye, then when it's time to go to the home screen I get pop-up after pop-up saying that "The process com.android.phone has stopped unexpectedly. Please try again."
I have no way of getting on my phone at all, what can I do?
View 11 Replies
View Related
Nov 12, 2010
I Just installed a new theme (Live Wire) for my Lithium Mod Rom. Don't know if there is a connection, but when I need to update an app, I get the message something like "process android media process stopped unexpectedly" and it will not allow the update. Everything else works well. I have turned it off for awhile, and have done a battery pull.
View 1 Replies
View Related
May 11, 2010
Every 5 minutes this error pops up "Sorry! the process android.process.acore has stopped unexpectdly. please try again." It doesnt actually close anything. It pops up even when im not in an app. So it's more annoying than anything.
View 3 Replies
View Related
Jul 30, 2010
I'm using Xperia x10 mini. Whenever I try to add a contact to my phonebook, before clicking save this message appears: "The process android.process.acore has stopped unepectedly. Please try again." And I have no other choice but to click "force close"... Another thing is, even though my contacts' names appears in the messages in my inbox, when I click on the phonebook icon, the phonebook is empty...
View 4 Replies
View Related
Feb 1, 2010
Are the processes in android asynchronous? If they are asynchronous then how can we conclude when the activity or process is finished or completed its execution.
View 2 Replies
View Related
Sep 11, 2010
So since I got the phone on Thursday, at random, I'll get these popup crash messages, that say "The process com.google.process.gapps has stopped unexpectedly" it has a "Force Close" button, which doesn't seem to change anything other than to acknowlege the message.It will happen at random, sometimes while I'm on the home screen, or sending a text message, but more recently, as I was trying to manage & link contacts. When I searched for this message it seemed to be related to people using Gmail, but I always get this message when I'm doing other things and not even touching my Gmail account.
View 1 Replies
View Related
Sep 19, 2009
I bought a new phone, but I can not run it.
I get the following information: "Sorry! The process com.google.process.gaps has stopped unexpectedly. Please try again".
View 1 Replies
View Related
Apr 17, 2010
I've searched around the forums (here and SDX forums) and although it seems the few people that had this issue were able to solve it, my case seems a bit different.
It's different because of the people I've read solving the issue, it was a problem with something they changed / removed with gmail / gmail storage or talk / talk storage. And when they cleared the cache or re-installed the problem went away. Also, it seemed that the same people had a problem with downloading from the market...
Neither of the above apply to me, but yet I'm still getting this FC error all the time!
I was helping a friend with their CL14 Moment out of the box...and went from stock 1.5 CL14 to 2.1 DD03 w/Joey recovery to EclairDD10 and v5 root. I then did the streaming media fix, and then the private app (build.prop) fix (all previously done with my phone no problems). I did all of these update right in a row, and after my last re-boot the FC error (process com.google.process.gapps has stoped unexpectedly) started showing up and won't go away.
The only .apk / odex files I removed were the preloaded Sprint apps
Does anybody have any other ideas on how I can get this FC error to stop? I've tried clearing the cache / data for all the mail / talk apps, rebooted, cleared dalvik cache...
View 6 Replies
View Related
Sep 17, 2010
Keep getting this message "The process com.google.process.gapps has stooped working unexpectedly. Any thoughts on what this is and how to resolve?
View 3 Replies
View Related
Sep 7, 2010
I'm having trouble uploading pictures I've taken on my DX to facebook through the "Quick Upload" option.I got a few uploaded, so I know it works, but now everytime I try, the status bad fills up all the way to "Uploading 100%" then it stalls before giving me the error "Can't send response now.Try again later."I've tried turning Wi-Fi on or off, but on both Wi-Fi and 3G it's not working.Thoughts?
View 1 Replies
View Related
Aug 25, 2010
Is there a way to craft a daemon process as to make it "unlistable" to a process viewer?
OR
is there a way to dynamically change a process name?
I'd like to design a security application without having to modify the firmware, if possible (yes I know about "security through obscurity"...).
View 1 Replies
View Related
Sep 29, 2010
I have a hosting account at godaddy ruinning Linux. Is has MySQL. I am creating a J2ME application that runs on android and I was wondering if there is any simpler way to connect from j2me application to my MySQL server?
Is it required to install anything at my server? which I cannot do because of the shared account. Any way to just open the connection, update some data in the MySQL from j2me application?
View 2 Replies
View Related
Jan 19, 2009
Is it possible to use linux version flash player plug-in on x86 for android x86 version?
View 3 Replies
View Related
