the remapCoordinateSystem method remaps the axis for sensor readings, but I want to remap the coordinate system to any angle, for example: new coordinate system is say relative to earth's coordinate system, 20 degrees clockwise to earth's X axis, and 10 degrees to earth's Y axis, while Z is derived from X and Y axis.
View 2 Replies
I means when you rotate the screen show to 90 degree,Then the coordinate system should also make an corresponding rotate[ (x,y) should change to (y,x)],To make touch event works correctly.
View 3 Replies View RelatedI'm trying to find information on how to change the coordinate system for the canvas.I have some vector data I'd like to draw to a canvas using things like circles and lines, but the data's coordinate system doesn't match the canvas coordinate system. Is there a way to map the units I'm using to the screen's units?
I'm drawing to an ImageView which isn't taking up the entire display.If I have to do my own calculations prior to each drawing call, how to I find the width and height of my ImageView?The getWidth() and getHeight() calls I tried seem to be returning the entire canvas size and not the size of the ImageView which isn't helpful.I see some matrix stuff, is that something that will work for me?I tried to use the "public void scale(float sx, float sy)", but that works more like a pixel level zoom rather than a vector scale function by expanding each pixel. This means if the dimensions are increased to fit the screen, the line thickness is also increased.
I am trying to rotate a canvas with canvas.rotate and move an object on it at the same time. The problem is that with the rotation, the coordinate system of the canvas rotates as well, so I get cases when my object is supposed to be moving along the y axis, but the y axis is rotated on place of the x axis. It is a mess. Is there a way to go around this?
View 1 Replies View RelatedI am developing a game. In which the user controls movement using the accelerometer. Sounds effects can also be enabled. However when laying the phone flat down and playing the game without the accelerometer gives nice 0,0,0 values. However when play WITH SOUNDS on, i get a buch of weird values: while the phone is NOT moving.
This is really a big bug that makes life hard for Game Developers. I tried to take an avarge of the last 5 values from the sensor.. but this is not enough.. The harder the sounds plays: the higher the weird sensor values. When using the headphones: almost no weird values. Seems that sounds interferes with the accelerometer sensor.
Is there a simple way to obtain the x,y coordinate whenever someone touches the screen while my app is running? Just looking to store them in some integers.
View 1 Replies View RelatedI'm trying to generate some points at random distances away from a fixed point using GPS.How can I add distance in meters to a GPS coordinate?I've looked at UTM to GPS conversion but is there a simpler method to achieve this?I'm working on Android platform just in case.
View 2 Replies View RelatedI am writing a program that convert TM-2 degree to lat/lon on Android, but I can't find formula for that. I do find some example on internet, but most of them are convert with open source library, that I can't use on Android platform. I also find a java class that do convert from UTM to lat lon, but it seems no suitable for TM 2 degreen coordinate system. So my question is: how do I convert TM 2 degree coordinate to lat/lon? Where can I find formula?
View 2 Replies View RelatedI have an imageview and when clicked, calls OnClickListener.onClick(View v). How do I get the exact point/coordinate that the user clicked?
View 1 Replies View Relatedi want to find a gpls Coordinate and locate it on my google map. I've this code but it's not working :
Code:
private GoogleMap map;
private final LatLng location = new LatLng(310901,512113);
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_main);
[Code]...
I've this coordinate and it've tested it on google : E512113 N310901
How can I tell google to find this location ?
How to make screen mirror like as apsis coordinate...???
I tried:
Code:
persist.hwc.mirroring.enabled=1
persist.hwc.mirroring.transform=1
For example:
< | >
I found how to rotate manually:
Code:
Set in build.prob -> ro.sf.hwrotation = 0 for 0, 1 for 90, 2 for 180, 3 for 270 which you want...
But I need to mirror effect on all based android system
Is there a way or a program to remap the keys on the front? It would be great to be able to double press or hold down and have shortcuts to other programs.
View 1 Replies View RelatedFor those making roms for the HTC One series, could you re-re-map the hardware buttons so that the recent apps button pulls up the recent apps (normal ics behavior), and then a long press on the recent apps button maps to the menu button?
My reasoning, is eventually, the "menu" button is something that will get obsoleted, so mapping it as a secondary action (i.e. long press) is a better approach than the current mapping on some of the Roms out there (like cm9). Personally, I'm not a fan of long-presses, so I prefer it for functions I hardly use (like menu).
As for the Gs3, I recommend mapping the 'menu' button to the 'recent apps', and a long press to the menu function (instead of long pressing the home button for recent apps). Again, my reasoning is, when the menu button, eventually gets obsoleted, it becomes pointless having the physical menu button do nothing.
I am on MIUI ROM and I love Xposed ! [emoji5]. But a lot are not totally compatible with MIUI, like mod for remap button...or insert emoticon (emoji) in stock message app. How to manage it ?
View 3 Replies View RelatedWhile messing around earlier, i figured a few things out. its always bugged me that the Eris didnt have a dedicated Camera button. So i decided to just remap the Search softkey-i rarely use it anyways.
flash from recovery, it works on any rom.
This makes a long press on the Search softkey pull up the Camera. and yes...you can remap other keys to do other things too, but this is just the only one i thought was needed.
I downloaded and installed the Lock 2.0 free trial program. Upon install, when I clicked on the "Home" button on my Samsung Moment, a pop appeared with 3 choices:
Complete Action Using:
1) Home (go to home)
2) Lock icon (meaning to lock the phone) - also with a warning - do not use this as default - you had (sic) been warned.
3) a checkbox to use either choice 1 or 2 as the default always.
This made me curious. First of all if I accidentally remapped the Home button the Lock app, how would I be able to remap it to the default "Home" action? Looked in settings and do not see how I can remap Home button. I don't like how a 3rd part app can intercept the Home button and yet I can't figure out how to undo the damage if I accidentally remapped the Home button to the 3rd party app. Anyone here know if this is possible to restore the Home button if you mess up and a 3rd party app maps it by default?
I would like to play games using my physical keyboard to simulate various screen touches. I found various apps which do it for a Gamepad but bit really for a physical keyboard.
View 3 Replies View RelatedEverything was working fine on my Samsung galaxy s alpa sc-03e this is the link to the thread URL.... I have successfully rooted and installed recovery and enjoying the few custom roms, then suddenly I installed S3 i9305 rom didn't got the success, then install philz recovery URL.... and installed slim rom from Note 2 section URL.... 6 and then after appearing docomo logo black screen, then I put it on Download mode and installed stock rom but now touch not working. How can i access to this ? Its never happened in my life after installing so many roms in so many devices. And also Black Button key is not working, How I can remap all this ?
Also tired *#2663# but nothing is happening instead after connecting through otg cable with mouse then its come to the home screen? I have tried *#0*# each and everything is working but except the touch and also my keys switch to another.
I have a galaxy note 2 and I enabled the on screen buttons, disabled the capacitive buttons and would love to remap the hardware home button to open !utter while my on screen buttons work normally fine. Is there anyway I can do this? I have tried button remapper but there's no option for apps only core functions such as home, back, menu, etc.
SGH-T889
i own motorola that have install miui rom. If task manager change with search key button ?how to do it?
i been searching for remaping, only i found is for app_switch
Quote:
*** quote ****
edit your keylayout files..
/system/usr/keylayout/
cypress-touchkey.kl
Code:
key 139 MENU VIRTUAL
key 102 HOME VIRTUAL
key 158 BACK VIRTUAL
key 217 APP_SWITCH VIRTUAL
[code]....
i just want remap search key to task manager...
Looking to remap my home key, and my menu and back soft keys on my s3. I've looked at editing scripts, and even Xposed modules for this and here is what I found.
I can remap my keys manually, but I cannot map them to open an application.
With Gravity Box Module, I can map the applications to launch on a double press or a long press.
Here is what I want to do with a single tap.
[MENU SOFT KEY] [HOME KEY] [BACK SOFT KEY]
Open Phone Open search Open Camera
Is there an xposed module for this?
I just managed to remap my broken power button to my volume up button, so I am able to lock/unlock the screen. The problem is that it's still not possible to turn on the phone with the volumen button (shutdown/run out of battery). I changed the gpio-keys.kl and Generic.kl file for remapping.
View 2 Replies View RelatedI reecntly bought a Rapoo BT keyb (E6300), it is optimized for the Apple products therefore some keys do not behave as i wish with my Nexus S.
I'd like to find out how (as per title) remap the keys or at least find out Vendor and Product ID...
so, using this command from the terminal: cat /proc/bus/input/devices
I discovered that my KB has Vendor=099a Product=0500.
Now I'm gonna build a custom Keyboard layout, should i create a keyCharacterMap as well?
well, after some more digging, i think i won't need to make a KCM. Still i can't find a way to let my Keyb to use my keyboardlayout. According to catalog it still uses the generic.kl even if in the right directory a file with the keyboard name exists...
I'd like to remap some of the keys on the PHYSICAL keyboard. For example, I've never inserted a smiley in a message and don't intend to start now, so remaping the dedicated smiley key to something useful would be productive.
View 9 Replies View RelatedDoes anyone have any insight on how or even if this could be done. I don't see why it couldn't be done but from what I see it seems pretty locked up and I have nooo idea how to get into it.
View 13 Replies View RelatedAnyone having issues with the LauncherPro contacts not able to load? Is there a way to remap it? I hold the button and can change the shortcut, but it won't let me select just contacts, I have to select a specific one.
View 12 Replies View RelatedBut I find myself endlessly annoyed by the placement of the Voice Control button on the side of the phone. This button's placement is absolutely perfect for accidentally pushing it with your thumb or fingers when you're on a call, or when holding the phone in either portrait or landscape mode. I dont use voice control. Even if I did, I'd want it to turn on when I decided to use it. I've searched the Phone Settings; I've searched these forums; I've searched the Android Marketplace. Short of cracking the case and physically removing the button
View 6 Replies View RelatedIs it possible to remap the Hardware back button to toggle screen rotation? (I'm on 4.1.1 with root).
View 1 Replies View RelatedMy new LG G2. It has this shortcut if you long press volume up/down it starts quick memo/camera. But quick memo is useless for me I'd rather love to start a widget (a tasker task). I tryed several app's and xposed framework modules but I can't get a Widget working with the remapping.
How to remap the volume up hardware button to a tasker task widget?
I'm designing a game for Android and I would like to use the accelerometer for some aspects of control. Has anyone come across a tutorial or example for something like this?
View 1 Replies View Related