Android :: Memory Leak Using ListActivity
Oct 14, 2010
I have an application that uses a Service and some list activities. When the activities are opened, I can see the heap usage increase in DDMS. When the activities are closed, the heap usage decreases slightly. The service is still running in the background at this point. If the activity is started again by re-running the application and then closed, the heap usage increases again then decreases, but never returns to the original level before the activity was first opened. If it repeatedly (10-15 times) open the activity then close the activity, the heap size (both MB and # Objects) balloons!
I'd expect ListActivity's onDestroy to take care of itself when it gets destroyed. What am I missing with this? Am I using ListActivity incorrectly?
If I examine the heap using MAT, I see 10-15 ListView objects. Unfortunately, I've not got much experience with MAT, but I think it means that the instances are still hanging around rather than being garbage collected. Can anyone explain what's going on?
A test app similar to my real code is below. Create a new android application, add this to the manifest:
CODE:................
View 3 Replies
Sep 8, 2009
I am using a ListActivity. Each list entry contains an ImageView and a TextView. I have a huge list and has been getting Out of Memory errors once I scroll through a fair amount of them. I figured I need to reduce the size of the images but I am wondering what happens to the objects once the list entry is hidden from view (as i scroll down the list). I have read somewhere that the list entry objects are automatically re-use. But what happens to the drawable images which were loaded into the ImageView? IF the ImageView object is reused, what happens to the binary image? Are they freed automatically? How do I prevent the OutOfMemory exception? I want to do something similar like the Android Market. As one scroll downwards the images are loaded and new entries are loaded. The Markey can have a long list which one can scroll down and all the way back up again without any problem. The only difference being mine throws OutOfMemory Exception. Advice anyone?
View 2 Replies
View Related
Jun 27, 2009
If I create and release multiple AudioTrack objects, the GREF count continually increases which eventually causes an application crash. Even with a forced garbage collection, I end up with the same high GREF count at the end of the loop.In my application, I continuously create AudioTracks from variable lenght buffers.I guess I can try and use a fixed size pool of AudioTracks each with a buffer large enough to fit my longest sound, and try and reuse them.Is there a better/correct way to completely clear resources used by an AudioTrack?
View 5 Replies
View Related
Jan 10, 2010
I have been banging away at this one for weeks and I feel like I have exhausted my research capabilities. I am hoping that someone will see my error in the code posted below. The code is completely functional doing everything I need, but there is a major memory leak. When I try to track memory in the DDMS, the VM Heap tells me that my object count is relatively stable and the used memory is also relatively stable (it comes back down to a similar value after each GC after panning).
When I look at the memory pie chart, the free memory loses over 1meg of capacity with each map pan (overlay reload) and the Unknown memory grows. I have not found anything with the allocation tracker. Functional Summary: I load overlays onto a map based on data I get from polling my server. When I pan the map far enough I clear the overlays and load new ones.
MapFrontEnd.java (snippets): //header info private List<Overlay> overlays;
//in onCreate overlays = mapView.getOverlays();
// here I attempt to fully clean up my old Overlays for (Overlay i : overlays) {
if (i instanceof ParcelOverlay) ((ParcelOverlay) i).cleanUp(); }
View 4 Replies
View Related
Dec 4, 2009
In my app, I'm fetching data via HTTP and use the response string to create an ArrayList of objects. So what I'm doing once I get the response is:
String[] fields = response.split("<field>");
and use the field[] values like this:
ArrayList<Movie> movies = new ArrayList<Movie>(); for (int row = 1; row < fields.length; row += 9) { movies.add(new Movie(fields[row], fields[row + 1], ..., fields[row + 8]);
}
View 5 Replies
View Related
Nov 24, 2009
I am experiencing a memory / resource leak on a T-Mobile G1 device with my application. I installed the "Task Manager" application from Android market and my memory usage is not monotonically increasing. It stays relatively flat over time. Furthermore, none of the other processes are chewing up tons of memory either (really, I can get into this state with just my app running). I am not experiencing this problem on any of the other Android phones (including Eris, Hero, and Droid).
The interesting thing is that if I kill my application, the phone is *still* very slow and sluggish. The only thing that seems to be able to get me out of this situation is a battery pull. If I run my application for about 3 hours, the phone starts to become very sluggish. Even simple operations like hitting the "home" button take many seconds. I'm not sure what to do at this point and am wondering where I can go from here.
View 3 Replies
View Related
Sep 24, 2009
In my app activity A creates activity B, however when the back key is pressed it goes back to activity A. This is a simplified version of my application. I would expect memory to be reclaimed when going back to Activity A. Going to activity B allocates more memory. I am using dumpsys meminfo to get the allocated kbs. How can I easily tell what memory is creeping? I do not keep any references to activity B. I know about the ddms allocation tracker, but wondering if there is a more better tool to figure this out.
View 2 Replies
View Related
Jan 6, 2010
I'm parsing a document with large text field. In my characters section I am using StringBuilder
currentStory.append(ch, start, length);
then in my endElement i'm assigning it to the appropriate field on my object.
if (name.equals(tagDesc)) { inDesc = false;
if (currentItem != null ) { currentItem.setSummaryText(currentStory.toString());
} currentStory.setLength(0);
} setSummary is public void setSummaryText(String text) { Story = text;
}
And I am running out of memory. If I change setSummaryText to something completely weird like this:
public void setSummaryText(String text) { char[] local = text.toString(
) Story = new String(local);
}
I am fine. I just cant figure out where I am holding that reference?
Story is a member var of this object initialized with "";
Note - assigning to local String variable instead of char[] - fails as well.
View 1 Replies
View Related
Aug 10, 2009
I know that's a subject which was discuss a lot of time and I try to find a solution since more than 6 day for the memory leak which appears in my application.
I've read this page: http://www.curious-creature.org/2008/12/18/avoid-memory-leaks-on-andr...
So, I don't use static member fields, I always use recycle() and I don't use inner class.
My application use a gallery and some bitmap. I use finalize to monitor garbage collection in each class of my application: protected void finalize() throws Throwable {try {Log.d("FINALIZE", this.toString());} finally {super.finalize();}
View 2 Replies
View Related
Oct 6, 2010
After several hours of searching for the cause of a Out Of Memory Error, I found a wierd problem with Strings. To keep it simple, trimmed it down to something like this:
ArrayList<String> someStringList = new ArrayList<String>(1000);
for (int i=0; i<1000; i++) {
String someBigString = new String(new char[100000]);
String someSmallString = someBigString.substring(0,1);
someStringList.add(someSmallString);
}
View 16 Replies
View Related
Sep 8, 2009
There appears to be a leak when using PhoneStateListeners. The following code simply reigsters in onResume and unregisters in onPause a PhoneStateListener. Repeatedly launch then press BACK (so the app is finished & onDestory is called before the next launch) and the number of activities reported by meminfo will equal the number of launches. For instance, here is the output I get after launching (and finishing) 11 times in sequence:
dumpsys meminfo com.example.leak Currently running services: meminfo
DUMP OF SERVICE meminfo: Applications Memory Usage (kB): Uptime: 12204322 Realtime: 12204322
** MEMINFO in pid 1358 [com.example.leak] ** native dalvik other total size:
2648 3079 N/A 5727
allocated: 2604 2254 N/A 4858
free: 43 825 N/A 868
(Pss): 913 1305 1475 3693
(shared dirty): 1080 3864 568 5512
(priv dirty): 808 936 1056 2800
Objects Views: 77
ViewRoots: AppContexts: 12
Activities: 11
Assets: 2
AssetManagers: 2
Local Binders: 36
Proxy Binders: 21
Death Recipients: 0
OpenSSL Sockets: 0
SQL heap: 0
dbFiles: 0
numPagers: 0
inactivePageKB: 0
activePageKB: 0 #
Without the PhoneStateListener, the number of activities is always 1 no matter how many times the app is launched & finished. So, am I doing anything wrong here? Or is this a bug in the TelephonyManager?
Here's the code package com.example.leak;
import android.app.Activity; import android.content.Context; import android.os.Bundle; import android.telephony.PhoneStateListener; import android.telephony.TelephonyManager; import android.util.Log;
public class LeakExample extends Activity {
private class MyPhoneStateListener extends PhoneStateListener {
@Override public void onCallStateChanged(int state, String incomingNumber) {
if ((state == TelephonyManager.CALL_STATE_RINGING)
|| (state == TelephonyManager.CALL_STATE_OFFHOOK)) {
LeakExample.this.finish();
} } }
MyPhoneStateListener phone_listener = new MyPhoneStateListener();
TelephonyManager telMgr ;
@Override public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.main);
telMgr = (TelephonyManager) getSystemService (Context.TELEPHONY_SERVICE);
} @Override protected void onPause() { super.onPause();
telMgr.listen(phone_listener, PhoneStateListener.LISTEN_NONE);
} @Override protected void onResume() { super.onResume();
telMgr.listen(phone_listener, PhoneStateListener.LISTEN_CALL_STATE);
} @Override protected void onDestroy() { super.onDestroy();
Log.v("LEAK EXAMPLE", "onDestory");
}
View 3 Replies
View Related
Apr 14, 2010
I am using a simple frame animation and when I exit and reenter my activity the activity is still referenced in memory.
//This is a sample activity I created to simulate the problem public class MemoryLeakActivity extends Activity {
@Override public void onCreate(final Bundle savedInstanceState) super.onCreate(savedInstanceState);
} @Override public boolean onKeyDown(final int keyCode, final KeyEvent event) {
final Intent i = new Intent(MemoryLeakActivity.this, LeakyActivy.class);
startActivity(i); return super.onKeyDown(keyCode, event);
} }
View 3 Replies
View Related
Oct 15, 2009
I start a Service from an Activity, the user presses back, the Activity goes away and the Service stays running in the background. However the activity (and it's views) still stay in memory. I tested this with cupcake and G1. To reproduce I've made a simple program.
The activity:
package com.android.service_test;
import android.app.Activity;
import android.content.Intent;
import android.os.Bundle;
public class StartService extends Activity {
/** Called when the activity is first created. */
@Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState);
setContentView(R.layout.main);
startService(new Intent(getApplication(), RunningService.class));
} }
View 20 Replies
View Related
Oct 20, 2009
I use advanced task killer to keep things under control, and handcent in favor of the stock msg app. I notice that I have upwards of 80mb free memory after killing tasks after a reboot. Over the course of the day, with only my ignored apps running, that number shrinks to 48-50mb. Does that indicate a leak somewhere?
View 6 Replies
View Related
May 3, 2010
When I first boot up the phone and check the memory (after shutting down all the apps I don't want running) I notice my phone has about 220-250 MB free after leaving the phone on for about 2-3 hours, with no activity on my part, that number gets smaller and smaller. I just rebooted my phone again because it was down to 125 MB free with no applications running.
Also, "Android System" is consuming 65% of my battery life. I realize that number is inaccurate after a fresh reboot so I played with the phone for a good 4 hours running apps and such, so that I could get a good test of how much the OS is eating up in comparison to other apps. 65% is a bit much no?
View 6 Replies
View Related
Sep 2, 2010
I've been trying to diagnose a memory leak in an Android application I'm writing. I got a heap dump loaded into Eclipse, but the results I'm seeing are very curious. There are some 20,000 instances of an exception (specifically, LDAPException from the UnboundID LDAP library) in the heap with no inbound references.
That is, they show up at the root of the dominator tree. The OQL SELECT objects e FROM com.unboundid.ldap.sdk.LDAPException e WHERE (inbounds(e).length = 0) returns over 20,000 results, totalling to nearly all of the heap. And yet, the GC runs before the heap dump and I can see that it's running in the console, repeatedly, during the execution of the leaky code. If these instances have no inbound refs, what could be keeping them alive?
I also tried doing a "shortest paths to GC" query. It shows one LDAPConnectionReader row retaining 2 instances, and ~20k LDAPException @ <addr> unknown rows with various hex addresses.
Update: I haven't had time to further diagnose this since posting it, and the bounty I posted is ending before I likely will. I'm awarding it as best I can now, lest the points go to waste. Thanks to everyone who looked into this! I will come back later and update again with the results of further diagnosis, when life is a little less hectic.
View 3 Replies
View Related
Dec 5, 2009
In Taskiller the amount of free memory is showing between 90-105mb. Is this normal? I have deleted text messages, cleared cache, deleting emails from inbox and trash etc. I going to get rid of a few apps too, but its a bummer if I cant have many apps due to it affecting memory!
Also I understand that if flash it with the Modaco custom ROM. I can create a swap partition, does this help a lot? Also would I lose quite a lot of the HTC Hero features such as Sense UI for example if I flash it with Modaco?
View 9 Replies
View Related
May 12, 2010
I think I've got a memory leak somewhere. I'm running DC v2.08.1 and I've got a low memory error. It may be because I flashed from Fresh 2.0D to this without wiping, but I'm not sure. Does anyone have any ideas how I can figure it out without wiping. I'd really rather not wipe again.
View 3 Replies
View Related
Sep 6, 2010
Every since I updated launcher pro I get the updated service app running. Anyone else experiencing this problem?
LauncherPro Forum View topic - Newest version 7.7.1 memory leak?
View 2 Replies
View Related
Mar 1, 2010
I've been rooted and running roms for a while, starting when Pete was just coming out with his first Bugless Beauties. I've been through a bunch of ROMS, and installed them pretty much all the ways you can. Lately I've been on DroidMod 1.0. I had originally installed it without flashing /data. However, I noticed that my memory was getting pretty low, down to about 90 MB according to mini info widget. So I re-flashed, but this time I allowed it to wipe /data. Wow, what a difference. Immediately, I was up to almost 180M of memory! But it's been dropping steadily since then. I'm down to about 145M and that's with not loading very many new programs. I'm very conscientious about deleting cache, etc.
View 8 Replies
View Related
Aug 8, 2010
I don't know if it's just me, but my HTC Magic becomes very laggy after few minutes of use. Cleaning the Market and Navigator's cache and stopping all background tasks with TaskPanel Lite helps, but then after few minutes of use it becomes extremely laggy again. Don't know what to do.
Note: When I clear all the background tasks and cache, TaskPanel indicates that the phone available memory is from 20 -> 24mb (seems to be to few) but after some minutes of use it goes to 3 -> 5 mb of available memory.
View 2 Replies
View Related
Jun 3, 2010
I wiped and flashed fresh 2.1.2 and initially it gave me about 90mb free after a clean and fresh install. After I installed all my apps I still had about 70mb left. But during the past few days I've noticed the internal memory slowly decreasing or leaking even though I haven't downloaded anything new. I've lost about 10mb by doing absolutely nothing.
View 6 Replies
View Related
Apr 2, 2010
I upgraded from 1.5 to the "new" 2.1 leak.so far it's snappier, but I've noticed a couple anomolies. I'm hoping that someone here can enlighten me.If I do a fresh reboot then use Advanced Task Killer to kill all the apps that run on startup, I can usually get around 104 MB of free memory.But, for whatever reason, it always seems to trickle down to about 30 to 40 on any given day.I have to run ATK again just to get it back up to around 70 MB free.Is there a memory leak? Or is this caused by random apps running in the background eating memory?There are some, like MP3 Store, Market, and Voice Dialer that seem to run even after I kill them with ATK.Next question, and kind of an observation...I have a Kia Forte Koup with built in Bluetooth.The Eris syncs up just fine and I can voice dial. I've noticed that others have said that the Eris wouldn't let you voice-dial with Bluetooth, but mine does.It worked with 1.5, too. My question is whether there's a way to increase the volume further.when I had 1.5 I could easily hear calls over bluetooth, but 2.1 is much quieter. I've got the "Bluetooth In-Call Volume" maxed out, and my volume in my car is almost maxed, but it's still quieter than it used to be.Any ideas?
View 10 Replies
View Related
Jul 24, 2010
Definite Memory Leak. Rooted Most bloatware removed also Using ATK memory starts around 280. I have atk set hourly memory leaks to around 170 atk runs brings it back to around 200 within another hour down 100 atk runs brings it back to around 130. No push, Email check hourly. No WiFi, BT and GPS. Moderate use. Could be why some are having battery issues. This problem also exists before Rooting. Hopefully 2.2 will remedy this issue. As for rooting no real performance boost after bloatware removed.
View 8 Replies
View Related
Sep 12, 2010
I would like to know is there any tool in android to find memory leak and code optimization.
View 8 Replies
View Related
Sep 15, 2010
I am New to this Android platform. In one application, there is a memory leak. But I couldn't able to find in which activity or class the memory leak is happening. I am using MAT to get the information that the memory leak is there or not. But not able to find which activity is leaking. Please tell me how to find the which activity is leaking.
View 2 Replies
View Related
Nov 16, 2010
I've got a custom view in which I need to draw two bitmaps, one is a background, representing the image of a map and one is a pin which will be drawn on top/left position in canvas.
The both images are drawn onDraw and remain the same during the live of the activity that contains the view. After a while I get a OutOfMemoryError: bitmap size exceeds
VM budget
This means that I have a leak and the bitmaps don't get garbage collected. I asked this question before, but now the situation changed a little. I made a init method where I set the bitmaps I want to use but this still isn't a good approach, the error appears later, but still there.
Here is the code:
public class MyMapView extends View
private int xPos = 0;
private int yPos = 0;
private int space = 0;
private Bitmap resizedBitmap;
private Bitmap position;
private Bitmap mapBitmap;
public void destroy()
resizedBitmap.recycle();
resizedBitmap=null;
position.recycle();
position=null;
mapBitmap.recycle();
mapBitmap=null;
I call the setMapBitmap() and init() on onCreate of the activity that contains the view. In there I know what bitmap will be used as map. onPause of the activity I call the destroy() of the view. I still get errors.
I've read this this but I don't know how to adapt it on my case
I AM OPEN TO ANY OTHER SOLUTION. Please note that I need to resize the map bitmap (based on the height of the layout that contains it in mai activity) and still be able to draw the position on correct place.
View 1 Replies
View Related
Sep 1, 2010
I have a ListActivity containing an object I've defined called a MessageItem. I want to pass the data in this MessageItem off to a Service to do some stuff, but I don't want the Activity to be data bound to the Service such that Android can't reclaim the Activity if it needs to (ergo memory leak). What I'm doing is passing the MessageItem object to a method in a singleton class along with the application Context. The singleton method uses the application Context to start my Service. I pass to this Service an Intent. In this Intent, I put items from the MessageItem object like so:
intent.putExtra("subject", msg.getSubject());
intent.putExtra("summary", msg.getSummary());
intent.putExtra("created_on", msg.getCreatedDate());
intent.putExtra("read", msg.getIsRead());
Will this data bind my Activity to the Service the Intent gets passed into and cause a memory leak? Would this be a better implementation?:
intent.putExtra("subject", new String(msg.getSubject()));
intent.putExtra("summary", new String(msg.getSummary()));
intent.putExtra("created_on", new Integer(msg.getCreatedDate()));
intent.putExtra("read", new Boolean(msg.getIsRead()));
View 2 Replies
View Related
Jun 28, 2010
I have an activity using an xml layout where a WebView is embedded. I am not using the WebView in my activity code at all, all it does is sitting there in my xml layout and being visible. Now, when I finish the activity, I find that my activity is not being cleared from memory. (I check via hprof dump). The activity is entirely cleared though if I remove the WebView from the xml layout.
I already tried a
webView.destroy();
webView = null;
in onDestroy() of my activity, but that doesn't help much.
In my hprof dump, my activity (named 'Browser') has the following remaining GC roots (after having called destroy() on it):
com.myapp.android.activity.browser.Browser
- mContext of android.webkit.JWebCoreJavaBridge
- sJavaBridge of android.webkit.BrowserFrame [Class]
- mContext of android.webkit.PluginManager
- mInstance of android.webkit.PluginManager [Class]
I found that another developer has experienced similar thing, see the reply of Filipe Abrantes on:
http://www.curious-creature.org/2008/12/18/avoid-memory-leaks-on-android/
Indeed a very interesting post. Recently I had a very hard time troubleshooting a memory leak on my Android app. In the end it turned out that my xml layout included a WebView component that, even if not used, was preventing the memory from being g-collected after screen rotations/app restart. Is this a bug of the current implementation, or is there something specific that one needs to do when using WebViews. Now, unfortunately there has been no reply on the blog or the mailing list about this question yet. Therefore I am wondering, is that a bug in the SDK (maybe similar to the MapView bug as reported:
http://code.google.com/p/android/issues/detail?id=2181)
or how to get the activity entirely off the memory with a webview embedded?
View 1 Replies
View Related
Sep 1, 2010
Okay so a month or so ago I rooted with Unrevoked and put on the 2.2 leak that was available at the time. I doubt I'll get an OTA for the official 2.2 but I saw the update.zip was made available. Is there anyway to put this on my phone? I'm assuming I'll have to downgrade to stock RUU first and then I'll lose root and lose all my backup info. Basically I want the new 2.2 but I don't want to lose my data. Is this possible yet and if so how do you do it? There are a gazillion threads about similar issues but I haven't seen one that specifically talks about this yet, although it's probably in here somewhere.
View 2 Replies
View Related
