I have EditText in my application. While entering the text i am changing the portrait mode to landscape mode. Not the entered text is resetting. how do i handle this? Like if i change the orientation what ever entered text should be remain as it is.
View 2 Replies
Some of the content in my widget is based on custom drawing routines. is there any event i can listen for so i redraw and update this custom area when the orientation changes? currently my widget looks pretty screwed until the next widget update is requested.
View 3 Replies View RelatedI'm trying to find a way to properly handle setting up an activity where its orientation is determined from data in the intent that launched it. This is for a game where the user can choose levels, some of which are int portrait orientation and some are landscape orientation. The problem I'm facing is that setRequestedOrientation(ActivityInfo.SCREEN_ORIENTATION_LANDSCAPE) doesn't take effect until the activity is fully loaded. This is a problem for me because I do some loading and image processing during startup, which I'd like to only have to do once.
Currently, if the user chose a landscape level:
the activity starts onCreate(), defaulting to portrait discovers from analysing its launching Intent that it should be in landscape orientation continues regardless all the way to onResume(), loading information and performing other setup tasks at this point setRequestedOrientation kicks in so the application runs through onPause() to onDestroy() it then again starts up from onCreate() and runs to onResume() repeating the setup from earlier
Is there a way to avoid that and have it not perform the loading twice? For example, ideally, the activity would know before even onCreate was called whether it should be landscape or portrait depending on some property of the launching intent, but unless I've missed something that isn't possible. I've managed to hack together a way to avoid repeating the loading by checking a boolean before the time-consuming loading steps, but that doesn't seem like the right way of doing it. I imagine I could override onSaveInstanceState, but that would require a lot of additional coding. Is there a simple way to do this?
Solution:
As per Daniel's answer, this was actually quite easy to fix. I just needed to make a few small changes. In my 'menu' Activity, where the player would choose which level to play, I just had to add an if/else check to choose which class would be started by my Intent. This was done with a simple int representing portrait or landscape, determined when the player selected a level. I then created a second class extending my 'GameLogic' class; this is the class which contained most of the code for the game itself, rather than the menus, instructions, etc.
public class GameLandscape extends GameLogic{}
Literally that simple and completely empty. That way it inherited all the code from my previous activity where I had already coded it to handle things differently depending on the orientation. Lastly I just had to add a line to the manifest stating that GameLandscape would always run in landscape, and GameLogic would always run in portrait.
I have a ViewGroup that gets inflated dynamically. I have set Id's to all the inflated views. I am still not able to retain the inflated ViewGroup whenever the orientation is changed. Any particular check that i am missing here ?
View 1 Replies View RelatedMy main application screen uses a GridView to display a grid of icons. Each icon has an image, name, and Intent. I have the Activity set to handle orientation changes so I can change the background. The onCreate method sets up the GridView with 3 test icons that don't do anything and a preferences icon which opens a PreferencesActivity:............
View 2 Replies View RelatedI'm using Wakelock in my application to prevent the phone from sleeping when the app is visible. The problem comes when there is an orientation change and the system destroys and re-creates the app in landscape mode. If the wakelock timer has expired in the background the system takes the release of wakelock as an opportunity to switch off the screen.
Edit: I should mention that I am setting Wakelock onResume, and releasing onPause - as I understand it, it's necessary to release then to prevent the app from leaking the wakelock. I need wakelock to continue through the orientation change. Below I've outlined a solution to this. Is this the preferred way to handle it, and are there any alternatives?
Create a service which holds wakelock (rather than the activity) and when the activity unbinds the service starts a countdown timer (for say 10 seconds) in which it will release wakelock when the timer expires if the activity does not rebind. If it was a simple orientation change the activity will rebind within that 10 seconds and so maintain wakelock, if it doesn't, wakelock will be released.
From the documentation regarding the android:configChanges='orientation' attribute of the activity tag in the manifest:
Using this attribute should be avoided and used only as a last-resort. Please read Handling Runtime Changes for more information about how to properly handle a restart due to a configuration change.
Why does it say this?
In the case of threads and networking requests via a service API library, a request could be made with a reference to the original Activity, and then an orientation change could occur, leaving the thread pointing to the old Activity.
While this can be fixed, it's tedious and ugly compared to just handling the configuration changes yourself.
Why should it be avoided?
I guess I should also ask: would this be an acceptable reason for doing the orientation configuration changes yourself?
We have created an AppWidget that takes user inputted text into an EditText and displays a calculated amount of text inside a TextView on the Home Screen. We calculate the amount of text based on the AppWidgetInfo.minWidth, minHeight attributes. We do this to simulate scrolling; we cut up the user-inputted text into chunks that will fit into the widget and swap them based on button clicks.
When we save the widget with the device in Landscape mode, it calculates the appropriate amount of text for Landscape mode and displays it in the widget. The problem is when the user changes orientation of the device to Portrait mode (without opening the widget and resaving the text), the calculated amount of text for Landscape mode is still displayed. This also happens in the vice versa case (the user is in Portrait and saves, etc.)
How can we tell our AppWidget to recalculate the amount of text displayed on screen orientation change? Is this possible? How would you solve this problem?
My project is working fine when i hold my HTC device vertical.But the moment i rotate my screen 90degrees , it throws a force close error.Starts all over again, runs fine until i again change the orientation.How do i handle it ?
View 1 Replies View RelatedJust started working with the webview. The issue is performance following rotation. The WebView has to reload the page, which can be a bit tedious.What's the best of of handling an orientation change without reloading the page from source each time?
View 2 Replies View RelatedI am having an interesting problem and would appreciate any advice. My app uses WebView as its primary view. Using a javascript hook, it can launch the camera so the user can take a picture. The camera is launched using: Intent i = new Intent(android.provider.MediaStore.ACTION_IMAGE_CAPTURE);
When the camera starts, it makes sense to use landscape mode, so the user naturally turns the phone on its side. After the user takes a picture, control returns to my launching Activity (actually, my Acitivity gets restarted because it usually gets destroyed to free up memory for the camera on my Moto Droid). When my WebView gets recreated, I restore its state from the Bundle I saved in onSaveInstanceState().
Now everything looks ok, except the phone is still in landscape mode. However, when the user turns the phone upright bringing back into portrait mode, my WebView takes up only half of the screen. Somewhere along the way, the scale of my WebView got lost. This seems like such a minor issue, but it is driving me crazy.
Does anyone have an idea why this might be happening? What is the correct way to preserve the scale of my WebView? I am hesitant to hard code any scale factors because what looks good on my device may not be the same for another.
I have created an activity for my game which handles all orientation changes by itself and has a fixed "portrait" layout. Actually it uses the accelerometer and is rendered using 2D canvas methods. If the level has been completed I show up a highscore dialog in which the user can enter his name. The dialog is floating above the underlying level screen which gets blurred out nicely. This generally works.
Problem is that the dialog does not get rotated if the orientation of the phone changes. So even if the keyboard is exposed the dialog is shown in portrait mode instead of landscape. I have tried to use an activity with dialog theme instead but the behavior didn't change. After several tries it seems that I have found the reason for this: Once there's an activity with fixed orientation in the activity stack then all subsequent activities keep this orientation, too. They will not react on orientation changes anymore (e.g. if the keyboard gets exposed).
After upgrading to 1.5 SDK the described behavior changed a little bit. Now at subactivities indead react on orientation changes like expected. However, the need to have an opaque background! That means that neither dialogs nor activities with dialog theme will work. Those will stick with the orientation of the underlaying activity. So my workaround is to first start a sub-activity with an opaque black background. This activity then shows my highscore dialog on top. It looks quite okay but I wonder if there's a better solution? Is it possible to show a dialog above a fixed portrait or landscape activity which automatically adapts to orientation changes?
I have a notification that starts my activity and passes a messages using the intent's putExtra() function. The message is then displayed to the user in the activity's onCreate function. When the application is restarted due to a orientation change, the message is shown again as it is still in the intent's bundled data.
How can I remove the extra data?
I tried the following:
Bundle bundle = getIntent().getExtras();
if (bundle.getBoolean("showMessage")) {
// ... show message that is in bundle.getString("message")
// remove message
bundle.remove("showMessage");
}
But the message will still be shown after the orientation changed, seems like the intent used is not the one I changed, but the original one. The only workaround I found is to save the showMessage additionally in onSaveInstanceState(). Is there another way? Or is this the way to go?
I have a widget which has say, a dimension of 294*72(portrait). But when the orientation is changed, I need to change this dimension of the widget to another dimension which would look good on the landscape orientation.
View 4 Replies View RelatedI have an image set as my background and when it is vertical, the image looks fine. However, when the orentation is changed, the image get streched out. If there a way that I can change the image based on the orentation of the device?
View 4 Replies View RelatedI am building a AlertDialog in java code, so by default it is portrait but I want to show it in landscape orientation. How to do it in Java code?
View 2 Replies View RelatedI notice when using the emulator that when the screen is flipped, I get a following logcat message:
INFO/WindowManager(589): onOrientationChanged, rotation changed to 1
How can I catch this in the code? I want to know whenever the orientation changes. I assume I have to set a listener, but I can't find an example anywhere.
I'm doing an APP that shows some dialogs. Those dialogs are Alert dialogs, and when they are being showed if I change the orientation of the mobile I lost them...they are not being kept on the screen.
View 13 Replies View RelatedDo Views know changes in orientation? In my case, I create popups from TextView and need to know when the orientation changes(porttrait<-- >landscape). I cannot depend on activity's onOrientationChange.
View 2 Replies View RelatedI am making an Android app which is currently coming along nicely - I've hit upon a couple of stumbling blocks.
1) How do I stop the screen from going dim/off and the phone locking while the application is running?
2) Can I force the phone to enter landscape mode on running my application?
My app *sometimes* when orientation change, leaks Activities (getInstanceCount() increases from time to time) and i cannot figure out where references to my Activity or rather Context are kept - tried to use jhat but it couldn't help me much.
what is strange: it doesn't always happen on orientation change, so its even harder to fix.
btw when doing normal app life cycle - start, do something, exit - everything is ok - getInstanceCount() always returns 1.
I have an activity that checks stuffs online when it's created (is the GPS on and if not it asks if the user wants to turn it on).
The problem I'm having is that it is also doing it everytime I change the orientation of the screen.
I've read some comments on onConfigurationChanged() but is there a better way to be sure I'm checking the GPS only when the activity is first created?
I am working on an app that has multiple edittext fields and spinners and I want the focus to be switched to the next edittext box down when a selection is made from the spinner above.
View 1 Replies View RelatedI have this EditText and Button, and I have to reduce its height. I try with android:height="10px" but it doesn't work. Btw android:width="180px" works OK, then I don't know why I can't adjust the height.
Here is the code:....................
I want to display a table with some fields being editable -
see this example:
CODE:...........
Why is the textSize attribute ignored in EditText-fields? How can I make the text in those fields smaller, so that ALL cells have the same font size? Why does Android not honor that attribute, even if explicitly set?
My Application need to perform a database search when the user change the text in an EditText view. I need a method like onChange to allow me to know when the text in the EditText changed. How can I detect a change in the EditText view?
View 2 Replies View Relatedbuilt a simple app that displays an alertDialog with two buttons.The problem is it's not getting dismissed when i change orientation. After change i get a leak warning on debugger and the dialog appears twice(pressing back hides the first dialog, only a second back dismisses it completely).
View 7 Replies View RelatedI want to know how to change the orientation of my layout inside of eclipse but when I click the "layout" button it still shows it as a vertical layout.
View 4 Replies View RelatedI want to know how to change the orientation of my layout inside of eclipse.
View 1 Replies View Relatedconsider the simple layout:
CODE:..................