Is there an Android UI Library that has components like Action Bars and Dashboards? A lot of new applications seem to have these components, so I was hoping there was a solution available (either free or paid).
View 3 Replies
I want to show some notification when android phone is connected to system. I implemented BroadcastReceiver for listening to event android.intent.action.ACTION_UMS_CONNECTED in my application But it is not working. Is it possible to capture this event.
View 3 Replies View RelatedI thought that Action was preeminent during intent resolution and if the intent had the same action as the intent filter, it would be considered a match regardless of data, if the filter did not specify anything. So I was very surprised to find that supplying action+data where filter had only action, causes it to fail. In the code below, if you comment out line 47 so that data is *not* sent, only then it resolves correctly. To get it to work with the data (an id that is simply a String), what mime type should I specify in the intent filter?
View 11 Replies View RelatedI have an Android library project that makes calls to PreferencesManager.getDefaultSharedPreferences.
I have 2 version of my app, paid/free, and they are not able to access the preferences stored by the library code.
Can someone tell me the right way to store values in SharedPreferences in library code and have the values available to projects that include the library?
According to this SDK guide, unit-testing a Library project can be achieved by creating a standard application project, reference the Library project and then instrument the application for unit testing. However, when I do this and launch the test application I get the message.No tests found with test runner 'JUnit 3".I'm using Eclipse and the Android ADT plugin, all latest versions.the projects compile just fine. The test project also installs fine to the emulator. But in the console I can see that it looks for <library>.apk, which of course doesn't exist since I'm compiling this as a library into the test project.
View 1 Replies View RelatedI created a jni library which depends the third shared library, I must copy the third shared library to /system/lib, otherwise, Java application can't load jni library. But you know, on G1 with official OS image, /system/lib is readonly. I tried to call System.setProperty to set java.library.path to the location stored the thired shared library before load jni library, but the issue still exists.
View 6 Replies View RelatedAs I understand, the three ways of distributing my application are via Jar, Android Library and Android Library Project.Jar - cannot contain resources or XML layouts (so this is out for me)Android Library - I don't really know how this works but the Google API uses it..Android Library Project - includes resources but allows the client free rein on the code as it is distributed as source.If I am to create a closed source application that requires drawables and XML files that I want to distribute to other Android programmers, what should I use? And can someone direct me to a tutorial on creating an Android Library?
View 4 Replies View RelatedI've noticed on my phone sometimes my dbm would be -83 and I would only have 1 bar and other times it would have 3-4 bars at -83dbm. Sometimes I would only be getting -96 yet the bars would be full (all instances I was in 3G mode) do the bars take into account anything else besides dbm?
View 5 Replies View RelatedI notice no signal where i would usually have 2 or 3 bars. is there a fix to this? cause its draining my battery if i look at battery usage. i heard doing airplane mode or something fixes it but idk.
View 12 Replies View RelatedNo matter where I am I NEVER get more than 2 bars and more often than not, there's only 1 bar! Really? I'm not convinced it is only cosmetic. I seem to get most of my calls, but occasionally they go through to voicemail even though I've got the phone right next to me. It is so frustrating to be in the house with no signal! I always had at least 3 signals in my house.
Has anyone contacted Verizon about this? It is the only thing bothering me from 2.1 upgrade. Other than that I find the phone is truly awesome, but it IS a phone! However, I'm afraid to call Verizon tech people who always seem to go through the basics without any real regard to your issue, and have the screw up the phone with some random setting they want to try.
I did a baseband update and it wasn't working i it.restarted my phone and no i have no bars. What do i do to fix this?
View 5 Replies View RelatedI have the verizon HTC Driod and I have been having reception problems. I have had verizon for 6 years now and I have never had a problem but since I have had this phone I have never seen more then 2 bars.
View 13 Replies View RelatedCouldnt find my answer on the previous topics. But my phone on verizon hardly has full signal. Im running 2.1 on a brand new phone that i bought off a guy from craigslist. It seems my signal is only 1 to 2 bars most of the time, giving me around -86dbm. Sometimes it will be 3 bars, then it drops to one or none. Wondering if this is killing my battery too. Is there some update that fixes this? Or some test to perform if whats happeneing is normal or what?
View 20 Replies View RelatedReally interested to find out if in fact the fluctuating signal bars (and numeric value in settings) are fixed or not. I'm reading various things. Dealbreaker for me if it's not. I realize it's a UI issue only but how would I know the real signal strength if I'm say traveling and outside my usual comfort zone as to known coverage?
View 4 Replies View RelatedIt says 4 bars, but when i dial someone it goes down to 1 or 2 bars. Then when i hang up it goes back to 4. Then i go into about phone and it says -102 dBm, which does not equal 4 bars. SO why is it accurate only when i'm on a call?
View 7 Replies View RelatedIs there a way i can change it so it shows 5 bars instead of 4 for the signal strength?
View 19 Replies View RelatedHad my droid about 6 months now and decided to give *228 a try as my reception has not been great recently. To my surprise I got 2 extra bars of service right after I did *228, watched the bars go up while sitting in the same seat. Amazing, never thought it did much, but I am very surprised.
View 20 Replies View RelatedThis is my first smartphone and my first experience with any sort of high-speed mobile internet, so talk to me like an idiot. But my 3g speeds seem to be incredibly slow and I'm hoping there's something I can do about it. I might've just chalked it up to poor coverage in this area, but I get consistent 4 bars and I've ran SpeedTest.net and XtremeLabs Speedtest and, oddly, I'm getting very high numbers for upload speeds which seems to suggest the network is fine in this vicinity and something else is going on. WiFi speeds are perfect, very quick.
Here are the results of my most recent tests.
SpeedTest.net
Download: 100 kbps
Upload: 855 kbps
XtremeLabs
Max Download: 100.2 kbps
Upload: 223.6 kbps (Don't know about the large discrepancy here)
So is there any course of action I can take to improve the situation? I've not tested speeds at any other locations yet (just got the phone Wednesday) but the high upload speed seems to tell me that it's not just a matter of my house being a 3g dead zone. And of course, this is my first experience so maybe I'm completely wrong with all my assumptions.
I know there are many different status bar themes and stuff out there but on xda it seems really hard and i dont wanna get stuck in a bootloop. is there an easier way of doing it?
View 25 Replies View RelatedSo my virgin mobile phone that I had a while ago had this same problem, but less severe. I had fluctuations in the signal strength. Cover the side of the phone and the signal will go down, uncover, signal goes up.
Basically what I found, or in this case hypothesize, is that the internal antenna may be somewhere on one of the sides of the phone. When you cover the side the signal bars seem to go down. Hold the phone on the top corner and they may go back up. I've done this in a few places around my usual usage areas and all seem to follow this trend. Im not saying that correlation leads to causation, but im just saying maybe we're overlooking something here. This usually happens on the right side. However, I am puzzled that this would mean flesh interferes with radio waves...Also, I'm not complaining or questioning why as I've read several other threads on this issue and side with those who think the bars mean nothing. I've been able to make perfectly good phone calls with 0 bars, no dropped calls, and perfect sound quality.
As of the last 2 weeks or so I would say, a few problems have come up with my D1.
The first is the GPS never can locate my phone anymore when im in maps. It just continues to say trying to locate, and does nothing else. It used to locate just fine, and basically has just stopped.
Second is I loose all of my signal bars and then have no service according to my phone.
Third is my battery life has just turned to complete crap. I had it fully charged this morning before I left at 10:30, and it was dead by 4. Did a few occasional texts, nothing else and it was done.
All of these things literally came out of no where, didn't change kernels or anything else that I can think of. I am running CM6 with one of P3's kernels.
Really weird, but when my phone is in standby, I have one bar. But when I try to connect to a call it jumps up to 3 or 4 bars. Anyone else having this issue or do I have a faulty phone?
View 4 Replies View RelatedCode...
Doing something like this, but can't get notification.Reference said :
public static final String ACTION_PACKAGE_REMOVED
Since: API Level 1
Broadcast Action: An existing application package has been removed from the device. The data contains the name of the package. The package that is being installed does not receive this Intent
A need this intent to set uninstall password. Any suggestions?
Can you please tell me how can I launch the QuickContact action in android 2.1.
Like the one shown here:
http://1.bp.blogspot.com/_GTM_W5mVPTU/S-rk_0rla6I/AAAAAAAAADs/dUw4bDiagO4/s1600/Contacts.png
I would like to change the colors of the Wif bars on the status bar at top of screen I extracted the .png files (blue bars), opened them in Paint, and manually changed the color to yellow. Zipped them back up in Metamorph format and pushed them to my Metamorph format and pushed them to my sdcard Applied theme using Metamorph, and it worked, except that the background is now white. I created a theme using the original 5 files. I created a theme using the original 5 png's with blue bars, applied the theme, and it worked and it doesn't have the white background. I think I understand what's happening, but not sure how to format the pictures correctly so just the bars show without the background. Any help appreciated, thanks
View 6 Replies View RelatedI just noticed that when I make a call my phone automatically drops from Full bars to 1 or 2. Anywhere I am this happens and it really bugs me that I think I have Ful strength and when I git the call button and the call is placed I really don't have full strength.
View 3 Replies View RelatedMy 3g all of a sudden disappeared and my signal bars were flashing . Its back now after a reboot but never had issues before and I was staying in one spot. Hope it doesn't become an issue
View 1 Replies View RelatedI'm just trying to figure out what the heck that indicator is. Sorry, I'm a little new to all this. It looks like the phone but to the left is a weird squiggly line.
View 7 Replies View RelatedI would send two or more files using ACTION_SEND on Android as an excerpt code...
But that code does not work with GMail, it attaches only the last file.
How to apply on click action on menu in android?
View 2 Replies View Related