I want to make my android project Internationalization,but i don't know how to achieve it. I have searched on the internet,and just know i have to make values-xx file in
es.I want to know what should i do about the code.
View 2 Replies
I would like to know what is the right way to handle internationalization for statements with runtime data added to it. For example
1) Your input "xyz" is excellent!
2) You were "4 years" old when you switched from "Barney and Freinds" to "Spongebob" shows.
The double quoted values are user data obtained or calculated at run time. My platforms are primarily Java/Android. A right solution for Western languages are preferred over weaker universal one.
I am a C# developer and getting started with Android. I am attempting to duplicate a couple applications I already have in VS. The project is made of 2 executables and 1 common assembly. The 2 executables contain the application specific logic while the common contains centralized forms and logic (such as login form). I am using Eclipse. So how can I accomplish this layout?
View 1 Replies View RelatedWhen i use toast to display some text on screen it displays little bit above the bottom(default position).
now i want to display it in the middle of screen or according to my choice can any one guide me how to achieve this?
Strangely I find no support for Midi in Android.
The only thing that comes close is the Jetplayer, but this only takes a existing .jet file.
I want to dynamically generate a midi file with some intervals and play it.
I even thought about just manually creating a .jet file with a tone and then transposing it with the jet player, but it limits the transposing to -12, +12. Which is not so good for me.
There also is a ToneGenerator on Android, but it's limited to predefined tones with no way to transpose.
Does someone know how to achieve midi generation and playback on Android?
How can I achieve the following layout in Android?
What I would like, is to have the 3 blue boxes top aligned in their view, and then I'd like to have the red box centered underneath the blue boxes, but so that when I animate the red box up, it slides underneath the blue box.
I have tried placing the blue and red boxes in different layouts, but as soon as I animate the red box up, if it goes outside the border of its layout, it disappears (I don't want the red box's layout to clip the red box, I want the red box to slide under the blue box so that the blue box occludes the red box.)
I have also managed to create this layout using a series of nested layouts, but because of the draw order, the red box always appears on top of the blue box. I attempted to use the bringToFront() method, but I found out that this only works on sibling views within the same layout. Unfortunately I can't get this type of layout while keeping all 4 views within the same layout. Any suggestions? (also, if anyone has better suggestions for the title of this question I'm all ears)
Somethings I'll have an? .xml file selected when I compile a project, only to have a? .out.xml generated. Deleting the file doesn't clear the error, and Eclipse won't compile the project. It just reports that your project contains errors. The solution is to go to Project/Clean. This will clear the error in the project and allow it to compile.
View 6 Replies View RelatedI can now get our Android project to talk to our non-Android project. But there's still an issue: I are trying to have an Android class call a non Android Hello World class. I tried compiling our non-Android Hello World class in a separate Eclipse workspace. I then packaged it into a jar. I imported that jar into our Android Hello World class.
I then called one of the methods in the non-Android Hello World class. When I ran the Android Hello World class as an Android application, the following runtime error occurred. Here are the Android debug logs:
08-11 09:07:56.764: ERROR/AndroidRuntime(333): FATAL EXCEPTION: main
08-11 09:07:56.764: ERROR/AndroidRuntime(333): java.lang.ExceptionInInitializerError
08-11 09:07:56.764: ERROR/AndroidRuntime(333): at com.hello2.hello2.onCreate(hello2.java:27)
08-11 09:07:56.764: ERROR/AndroidRuntime(333): at android.app.Instrumentation.callActivityOnCreate(I nstrumentation.java:1047).....................
I have 2 android projects out of which I modified one to work as a library. I want the main project to refer to this library to perform few functions. While this scenario works just as expected, I want to introduce one more functionality. I want to link this library project with another just a java project which has code common to both Android and Blackberry applications. This second part however doesn't seem to work and throws "The application <appname> (<package name>) has stopped unexpectedly. Please try again" with a ForceClose button. I would greatly appreciate if someone can give a brief information on how to make this work.
View 2 Replies View RelatedIs it possible to do polling in Android? For example, I want my application to monitor a directory continuously. If there is for example a new folder created in that directory I want to log it down. Is it possible to acheive this by polling? Or is there any other way to do this?
View 7 Replies View RelatedI followed the instructions here on how to create an Android library project, and use it in an Android application:
http://developer.android.com/guide/developing/eclipse-adt.html
But it is not working. I can see the library project is added to my application but I cannot reference anything in it because it won't build. The R.java file from the lib is NOT being added to my application project, so the lib project contains tons of errors, everywhere it tries to reference it's own R.java file.
I don't know if this has anything to do with it, but in the console there are messages stating that the there is "No resource identifier found for attribute 'X' in package 'Lib Package'. My library package has a a few styleable attributes defined for a custom view I made, all of which are being complained about in this console message. The library builds just fine, and I don't get those messages in the console until I hook the library to my application, so I don't know what's up with this.
I have a webview and need to trigger a function when a user clicks on particular url. How can I achieve this?
View 5 Replies View RelatedSo I'm struggling a bit with what is probably a fairly basic concept.. Activity Lifecycle.I have read a bunch of thread on the topic, and I feel I understand well both the functionality, and rationale behind the lifecycle model implemented for Activities, but it raises a bit of a problem for me. My app (game) has a couple of distinct Activities for various sections:
1. The TitleActivity is a very small Activity that just launches a GLSurfaceView and renders a startup logo.I use this to detect the OpenGL capabilities of the device (eg so I know if it's using a software renderer)
2. The LaunchActivity is the main menu screen where the user can access options etc and start a game
3. The GameActivity will either launches a GLSurfaceView or a standard View depending on hardware capabilties.
The issue I am having is that I want to pre-load some "slow-to-load" resources, specifically audio, in the Title Activity so when the Launch Activity renders I can play some background music.I have the concept of a "media library" which I use throughout the game.Because of memory limitations in the SoundPool, I have limited this to only absolute real-time sounds and all others are played using mulitple instances of MediaPlayer.Hence my media library has a bunch of pre-loaded MediaPlayer instances which I access regularly during game play.. so it makes sense to have a centralized access point for all audio.All fine, however the problem is that when I launch one activity from another.. for example the TitleActivity starts the LaunchActivity (via a call to startActivity(Intent...)), the former goes through the onDestroy stage of its lifecycle.Now logically I had assumed that if I allocate a bunch of resources in the onCreate of an Activity, I should clean them up in the onDestroy, however in the case of my "media library" if I load up the audio files in the onCreate of my TitleActivity they will be torn down when the LaunchActivity is started because the TitleActivity will have its onDestroy() method called.
I'd like to populate a listview from 2 tables. Anyone know how I can achieve this? Currently what I have looks like but it only works with one adapter.
View 1 Replies View RelatedI am developing an application in which a user keeps on scrolling and each view displays a single text. The views are not suppose to end. How can i achieve that?
View 4 Replies View RelatedI am trying to develop small application for reset Logging on Phone. Can some one throw some Lights on how to achieve logging in AndriodRunTimeInit whenever there is exception? I want to write into file whenever there is RunTime exception.
View 1 Replies View RelatedIs there any way to achieve perspective drawing of an image.. are there any APIs.. or is OpenGL the only solution..
View 2 Replies View RelatedThings go fine, and i am able to design a layout like this...
View 3 Replies View RelatedI am drawing a pretty simple scene, with one large texture the about size of the screen (two triangles). I notice that the frame-rate is irregular: in most of cases, a frame finishes in 17 ms. However, in about 1 of 10 times, the frame finishes in 33ms.
My guess is probably some background services need to run. However, the Linux scheduler is biased towards my FG app, so the BG services are usually starved, until they can't take it anymore and they grab the CPU from my app ....
I am seeing stuttering in the animation. Is this due to the irregular frame rate? Should I delay each frame so that all frames are rendered with 33ms frame time? If so, what's the best technique of achieving this?
Is there an API that I can call to guarantee CPU resources for the render thread .... I really hope Android runs on some sort of real time kernel ...
On iPhone, Mobile Safari is WebKit based and supports hardware-accelerated -webkit-transform CSS properties. To be specific, I use the translate3d() transform.
What alternative is there for the Android browser? I need it to work on Android 1.5.
I would like to have a layout with 5 times 5 buttons. Each of them should have the same width and height (they should be square). And I want the whole matrix to use the screen width (or height, depending on rotation).
I currently do it "by hand" in the Java code:
CODE:...........
This can be improved by obtaining screen width first and then dividing by 5 to get rid of this literal 60. But I'm wondering how I can do this in the res/layout XML file? How can I specify for the height to be the same as the width? (I can set the width to match_parent.)
When using a mediaplayer to play back an audio file, you can set looping to true - that's not the issue here.
If looping is set to true, there's still an audible gap between the file finishing and then starting again.
How could I achieve true gapless playback? I've attempted using two instances of the same file, overriding oncomplete and onseek.. can't seem to improve the gap though.
When I right click the project in the eclipse, select "Properties". In the property page, select Android. According to the document, you can add the library project through that page. But my problem is that, there is no library information on the page. It only lists "project build target"
View 2 Replies View RelatedI have created a library project. When I use the library project in other project, it compiles. How ever, when I run the application, it always get the error "The application has stopped unexpectly.".
View 4 Replies View RelatedI am preparing to program an useful application, I would like to collect your ideas.
Any new ideas of apps that helpful in daily life, even achieve the society?
The following code executes a function that retrieves a file via ftp and then displays it in an imageview. Since I'm using the main thread the UI locks up, somebody tells me I can use asynctask to make this work but I can't figure it out :<
Is anybody familiar with this that could offer me some guidance? code...
Is there a way to achieve 'right click' functionality. Basically, I want to save some pictures from few web pages by using right click->save image as.
View 1 Replies View RelatedAfter doing a fair bit a tinkering and research experimenting for a month. I managed to find the best solution for people who don't want to use custom roms. Yet wanting a similar yet better mobile experience they had with 2.1 eclair. After a factory reset. Latest Voodoo Lagfix via Odin |or| ryanZA's OneClickLagFix your choice
1. root - z4root app from market.
2. ryanZA's OCLF app
- Alter minfree. Set to Aggressive
- Change Scheduler. Set to deadline
3. SGSTools.
- Upgrade stock apps.
+ Modded Contacts app showing all letters
+ Stock browser with useragent setting
+ Faster TouchWizLauncher(GTG) <--- TOUCHWIZ CAN't GET ANY SNAPPIER >
- GPS fix
Just like (2.1 with OLCF) Fast, snappy, loving it
In an effort to reduce duplication, I have my app's workspace split into 3 projects:
Main (A library project, where all of the common code lives)
Free (To make the free version)
Paid (To make the paid version)
Behavior in the free version and the paid version must differ sometimes. How can I "call into" the final projects from the library project? Here is some sample psuedo-code to illustrate my question: Code...
Is there a way to add external JARs to an Android project? I have some code in an external JAR file that I want to use. I saw many references to doing this within Eclipse, but I don't have Eclipse. I assume there's some way to do it by editing AndroidManifest.xml?
View 6 Replies View Related