Need to get back on 2.2 froyo. I'm on 2.1 now, rooted, with the universal root 1.625 beta. I'm also running the black glass theme on top of this. ROM manager and bootstrapper are already installed but when I try to load 2.2 , I get an error "installion aborted".
View 9 Replies
I have my phone rooted and have unofficial 2.1 installed on it. This morning I got an OTA update for the official 2.1. When I went to run it, it said update/installation aborted. Can anyone help me with I need to do in order to get the official 2.1 installed on my Droid?
View 9 Replies View RelatedInstall from sd card Finding update package Opening update package Verifying update package E:signature verification failed Installation aborted. Samething everytime! i tried doing it myself i just tried dmupdater?
View 3 Replies View RelatedMy phone is rooted and running 2.2 via download. Froyo is great but I have been waiting for the Flash update like everyone else.
Got the notice this morning on my phone that an OTA update was ready to install and asked if I wanted to proceed. Unit was fully charged and connected via WiFi.
Clicked "proceed" and the phone rebooted. On startup, it went to the boot screen that I used in the root process, and the bottom line said something like "upgrade aborted." Clicked reboot to get the phone usable and see what's what.
Now Settings>About Phone says Android 2.2, Build number FRG01B by Pete. The only "update.zip" file on the SD card is one from the root process. "System updates" says "Your system is currently up to date."
Looks like nothing happened.
Has rooting my phone precluded the possibility of an OTA update?
(If I had known that rooting my phone would prevent OTA updates I would not have done it.)
How can I get the OTA update to run? Where are the update files loaded? What do I do now?
My phones been broken for a month. Its finally been returned to me fix from the insurance company. I'm trying to install this mod onto it. I rooted it successfully with unrevoked. Installed the radio 32.48.00.32u_5.10.05.30 successfully. Wiped the data/cache. However when I try to install the cyanogen mod I get a message which is a list of
getprop("ro.product.device") == "bravoc" || get getprop("ro.build.product") == "bravoc"
finished with "(Status 7) Installation aborted".
I have a problem in that every time I flash a ROM, it gets as far as flashing boot and I get the following error:
Writing BOOT:...
E:Error finishing BOOT:
E:Failure at line 401L
write_raw_image PACKAGE:boot.img BOOT:
installation aborted.
/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue. ClockworkMod Recovery v2.0.1.4
I get this error every time. The weird thing is, despite getting the error, it still works with the defrost roms and has done with every release since 2.0a up until 2.0f. Any other ROM, MCRs, djdroid etc just result in a boot loop as far as the white HTC screen. I've wiped the dalvik cache and data but it makes no difference.
i am able to root my mobile s7562 and install superuser but when i try to install custom rom like pmp light or ultra (CWM from external sd)i am getting the problem of verification failed installation aborted.there is no advance option in cwm for wipe Dalvik CACHE.also option of toogle verification is not there .how i should further proceed for custom ro installation.
View 1 Replies View Relatedim trying to flash the cyanogen mod 6 (V6.0.0-RC1) on my cdma hero and it keeps saying E:Can't open /sdcard/update-cm-6.0.0-heroc-rc1-signed.zip (bad) installation abborted what does this mean and why?im assuming its the zip file? so where can i download a working version of android 2.2 (froyo) for my cdma hero? i got this download from http://forum.xda-developers.com/showthread.php?t=755795
View 49 Replies View RelatedWhen I'm trying to partition my desire using Rom Manager, it reboots with the exclamation mark error. If I press the power button I can see the message
E:failed to seek in /cache/update.zip (Invalid argument)
E:signature verification failed
Installation aborted
What have I done wrong or do I need to do?
I have compiled cwm for an allwinner a13 tablet I am stuck for in for on recovery but can't do any thing it just reboots to recovery if I select reboot system and can't install backup restore.
Only adb side loading works tried to install another working old cwm it shows successfully installed but it reboots to the same recovery.
I tried to install a custom rom but first I got first error in get prop =build Id
So removed get prop lines in updater script now I am getting installation aborted status 0 error
I flashed MIUI files for Fit on my Galaxy Gio through CWM but it gave me "Installation Aborted!" Error ... After that I restarted my Gio and it stuck on boot loop, I tried to get into recovery but I was unable to access it.Now when I want to flash CWM recovery for Gio through Odin it gets stuck on
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0[code]....
I been trying to install Cyanogen for about 2 weeks now. I'm able to just download Baked Snack 1.7 from Rom Manager no problem which I'm running now. But whenever I try flashing Cyanogen from Rom manager or even from CyanogenMod-6 for Evo: Is that an Evo in your pocket - CyanogenMod Forum and Cyanogen6 link? just recently thinking I wasnt using the right zip. It gives me an aborted Error status 7 installation aborted! Any suggestions? I seen some serious game play, (FPS at 50) and just a whole lot of customization while browsing on youtube and I want in!
View 11 Replies View RelatedI just rooted my HTC hero. I downloaded a ROM that looked almost exactly the same as the default(ZEN EXP), so I decided I wanted to change it to AOSP 2.2.1 (Froyo) Every time I try to change it my android just tells me that it aborted the installation.
View 2 Replies View RelatedI wanted to install custom firmware first, but my recovery software was old (when I choosed the ZIP from the SD card, it said: "Installation aborted."). I installed CWM 6.0.2.8 and when I strated it and choosed the ZIP, it was same. I rebooted my phone in the menu and it started again in recovery mode. I tried reboot again, but it was same.
View 1 Replies View RelatedShould I update the firmware on my rooted Hero, and if so, how would I go about doing this? The OTA download occurs, as well as the beginning of the install, but I get to the green screen and it says:
Welcome
Build : RA-heroc-v1.2.3
Finding update package...
Opening update package...
Verifying update package...
E: No signature (265 files)
E: Verification failed
Installation aborted.
I've tried to root my Samsung Galaxy Y Pro GT-B5510 using a number of different update.zip files recommended on various sites and forums, but I always encounter the same problem.
The instructions are the same everywhere, and I follow them to the letter: I transfer the file into the root directory of my SD card via USB cable, then disconnect and switch off my phone. I then get into recovery mode (after several attempts) using the Volume-Up, Home and Power buttons. I press Volume-Down to navigate the red menu and then Home to select "apply update from sdcard". I select update.zip, and a stream of cyan text rushes up my screen until it hits a snag...
The red menu reappears, followed by cyan text reading:
.zip
(Status 7)
Installation aborted.
Although the previous mountain of text rushes up the screen too fast to read, I am sometimes able to catch a glimpse of what seems to be the main indicator of the problem:
Error in tmp/sideload/package.zip
As I said, this happens with multiple versions of update.zip that I've found. What could be causing it?
I still have not received the ota 2.2 update for my motorola droid. I used to have my droid rooted to droidmod I think, I started having some problems (this was months ago so I'm sure everything was fixed) and I unrooted and went back to stock 2.0.1 and then used the ota to update to 2.1. So I am waiting on froyo and I was just wondering if I update and don't like it will I be able to flash back to 2.0.1.
View 14 Replies View RelatedHow do I get all my apps back that I had on stock froyo? And my bookmarks n such?
View 1 Replies View RelatedThat goes without saying but it appears that it flashes the bootloader so I would hold off on doing it if you like root.It could mean that we cant flash sbfs anymore, it could mean that we get a locked down bootloader and it could mean nothing,I am getting this from looking in the file and could be completely wrong though.
View 32 Replies View Relatedis the current available update for Froyo the same update that Verizon is releasing today at 12:00 pm eastern? why should people wait till noon if its the same? also, if i want to set phone back to original settings and redownload all my apps from the market, do i need to manually set up all my email account settings again? and are all of my pictures that i have taken saved to the my SD card? so i should remove that card when resetting phone and put back into phone when done or can i leave it in phone and they should be fine during reflashing ?
View 1 Replies View RelatedTrying to root my Droid original 2.2 froyo brg22d. Using RDS lite, did everything up to the part where I need to install the root file after recovery mode but whhen I do that it says "E-SIGNITURE INVALID, INSTALL ABORTED" wtf is that? And where can I find a rooted file that'll work?
X+power didn't bring it to recovery mode.... I had to hold the volume up+camera button when i get the exclamation mark. Just to give ya an idea on what kind of Droid I'm working with.
I was preparing to overclock my droid but once i saw the news i decided to hold off, i got far enough to only copy the flash_image file to my rom and thats it, i would like to delete it and unroot, whats the simplest way?
View 2 Replies View RelatedI am not able to install any .apk file from adb shell in froyo fs. after given the ./adb xyz.apk command, system restart and adb shell get hangs.
View 3 Replies View RelatedI'm the developer of XenoAmp. I am trying to make it run on Froyo, the thing I did was setting in manifest:
<uses-sdk
android:minSdkVersion="9"
android:targetSdkVersion="16" />
But I was told Froyo still gives "invalid" package. So is there anything else I need to do?
This is my first android device and i'm loving it... but one thing that irks me is the use, or lack thereof, of the back button.
As I am navigating menus and options in the Settings, I cannot simply go back one menu using the back key. For example, if I go to Settings->Battery Manager->Battery Profile Options and want to go back to the Settings screen, I cannot.
Pushing the back button does nothing and I can only go back to the Settings menu by going Home, then re-entering.
Another quirk regarding the back button is when reading emails. Using a regular email account such as Hotmail, I cannot simply read an email and go back to the inbox using the button.
It makes navigating the phone very tedious.
As advised by the experts, I did a factory reset when my phone went wacky on me. I didn't actually have Froyo installed when this happened, but as soon as I did the reset, I received a system prompt concerning the available upgrade and took it. My phone works better now, but but battery performance is about the same.
I have also been advised that battery performance (as in better than ever), among other things works best with a clean install, not the upgrade. Since I did a factory reset before taking the upgrade, I wonder if this is equivalent to a clean install, or if the clean install would still be worth my effort. If it's the latter, there is only one resource for clean install files which I have been referred to, which cannot help me because I don't have an XP machine available (I did try it on Windows 7). If a clean install is, in any case, the best option, are there any Win7 installation files available for Froyo?
I installed JB 4.1 custom rom by BLU ... I dont know what happened... i lost my IMEI... They have mentioned something like I have to backup the IMEI and all.. I dont know.. i have not done that and now I have lost my IMEI... What do I do now ? i tried restoring back to the Stock provided in the 4.1 JB forum 14th page. I want to get back my IMEI somehow so that I will be able to use my phone. !
View 1 Replies View Relatedhi i am currently unrooted Droid X after i recently restored my phone using the 2.2 SBF. i redownloaded most of my old applications but a few of them for some reason will just not install and i just get the yellow /! mark that says "install unsuccessful" everytime. specifically angry birds and i few other paid apps do this to me and i really want to install them. i tried clearing market data and cache in settings but still did not work. so any help with this?
View 3 Replies View RelatedI was wondering if you installed themes the same way you flash a new ROM. I flashed bb 05 to my droid, and found the smoked glass with blue theme and wanted to use that. Is that just a fancy version of BB? So really I would just be flashing that on instead of the original?
View 16 Replies View RelatedThe swype beta installation instructions note that you must uninstall all previous versions of swype before installing the beta. Since the Droid X comes with a pre-installed version of swype, does this mean that we (Droid X users) cannot install the swype beta, or is there some other workaround?
View 10 Replies View Related