Motorola Droid :: Clarivue Ultra-clear Screen Protector Review
Dec 30, 2009
Some people like screen protectors, some don't. Some enjoy the fact that the Droid's glass is made of gorilla glass. Others are paranoid and rather not take the chance. I am both, so I decided to shell out a few bucks to get a screen protector. And after much reading on these forums, it came down to two types of protectors: anti-scratch (invisibleshield, bodyguardz, etc) or static (boxwave, clarivue). I decided the latter because I like the fact that it can be reapplied and it doesn't interfere with the screen's sensitivity.
I bought a Clarivue ultra-clear screen protector. As mentioned earlier, it is a static clear screen protector so it's washable, reusable, and durable. I chose Clarivue over Boxwave for three reasons. 1. It's cheaper ($9.89 shipped vs Boxwave $12.95). 2. It comes with two screen protectors (Boxwave comes with one). and lastly, 3. Lifetime warranty ($3 shipping and handling added with every exchange).
I should mention that I am in no way affiliated with Clarivue nor am I getting paid to write this review. Just a happy customer sharing my thoughts on this product to help other fellow droid members
So it all comes down to, how is it? Well here's a few pictures for the heck of it.
Also includes a cleaning cloth for your screen before you apply. Note, the screen protector is NOT blue, that's the protective layer on top of the clear screen protector. Also, I just noticed that the screen protectors are upside down. Sorry for the confusion.
I must say, this worked really well. It removed all dust, oils and any marking that I previously had on my screen and dried really fast, so I was able to apply the protector right after.
The application process:
It's easy to put it on. Once the screen is clean, simply remove the first layer on the screen protector (Marked #1), align it to the phone and apply. I used a credit card to get rid of the bubbles. I did it in my dusty room so there were a few particles of dust that got in the way as I was putting it on, so I simply lifted the protector with tape and with another piece of tape wrapped around my finger I gently picked the dust off the screen and protector, then reapplied.
*Tip*Some have shared that it's better to put the protector on while the shower has been running under hot water for some time so that steam in the bathroom knocks off any chance of dust getting in the way of the application process.
Fit:
Width wise, the protector fits perfectly. From border to border, it neatly covers the screen.
Height wise, the protector falls one millimeter short. Some people may like this, some may not. I could care less.
*Note* The screen is not TOTALLY protected due to the speaker cutout. As you'll notice in the picture below, the screen is exposed just above the speaker.
Clarity:
The website states that it offers ultra-clear (hence the name) clarity, and I believe it was 99%. I must say, the clarity surely is there. The screen is still just as bright when phone is on and when the screen is off, I can't tell that there's a screen protector.
Feel:
The protector gives it a smooth glass-like finish. It feels as smooth as it was without it.
Strength:
I'm not about to go start scratching the hell out of the protector to see how strong it is or dropping my keys on it. So as far as its ability to withstand scratches, I cannot mention at the moment. However, the website advertises an "Anti-scratch" feature, but probably not to the degree as the real anti-scratch protectors.
Fingerprints/oils/markings:
Because it is not the anti-glare model, the screen is still very much prone to finger prints, face oils, and other markings. Is it as prone as it was without it? No, but ever so slightly. It manages to decrease the amount of markings, but they are still noticeable.
Satisfaction:
I'm very satisfied with Clarivue's ultra-clear screen protector. I would highly recommend this to anyone who is in search of a screen protector. It fits really well, its very affordable, will keep it your Droid secure for those worried about deep scratches, and it's got lifetime warranty, so there's piece of mind
Final thoughts:
Though I cannot speak for Boxwave's quality of products, I can confidently say that other members in this forums and beyond are extremely happy with that particular brand. It would be great if I could compare them side by side, but I feel as though they would be very similar.
Shipping took 7 business days to California. It was either coming from Washington (Directly north of California) or Canada. I believe it took a longer time because of the holiday rush.
I haven't tried to detach the protector, wash it, and reapply it so as far as that feature goes I cannot comment. But I will try it soon since I've got some bubbles left (stupid dusty room) so I will come back and update on that soon.
If you're thinking about a screen protector, I would highly recommend a static screen protector. It hardly noticeable so you've got nothing to lose and everything to gain. I'm confident that those who make this purchase will not regret it.
Lastly, if you're debating whether to get the anti-glare or the clear protector, it's all preference. You'll forfeit clarity for the convenience of anti-glare and no fingerprints. And vice versa. I'd love to try the anti-glare version, so Clarivue is you're reading this, hook it up
View 8 Replies
Jan 14, 2010
Two weeks ago I got the Clarivue ultra-clear screen protector and wrote a review which can be read here. I wanted to try the anti-glare version so I e-mailed Clarivue and they happily exchanged my ultra-clear for an anti-glare version. They sent me the anti-glare version first so that my screen could remain protected in agreement that I would send back the ultra-clear protector. So now this review will cover Clarivue's anti-glare screen protector. Packaging was the same as the ultra-clear protector, so I will not post pictures of the package, only pictures of the protector on the phone. Two different backgrounds so that you can compare the color and contrast with the protector on. I apologize for the blurriness of the second picture.
The application process: Application of this product was still very simple. This time around, however, I applied the protector while the hot water from my shower was steaming my bathroom. It helped with the dust a bit though I still managed to get two little pieces in there. I easily got rid of them with some tape.
Fit:...............
View 3 Replies
View Related
Dec 20, 2009
Got my Boxwave Anti Glare screen today and wanted to provide a review for folks who are on the fence.
It came by USPS in an envelope. It was in a thin plastic bag with instructions, one of those microfiber cloths, and something called a cleartouch applicator (basically a thin piece of plastic/cardboard hybrid used to smooth out bubbles under the screen).
Application seemed easy but there was so much dust, hairs, etc getting stuck to the adhesive side of the screen. I read up on a tip here in the forums about applying it in the bathroom with the shower running on hot. That worked really well to say the least. I also took some scotch tape in there with me and removed some lint on there. Before I applied it, I ran it through the hot water in the shower real quick and shook it like a polaroid camera before applying. There were many water droplets on the screen's adhesive side but when I put it on they disappeared and eventually evaporated.
I got it on there pretty nice with no bubbles. There are a few tiny bubble like things on the side but not on the screen and invisible when the screen is on. The screen did indeed lose its nice smooth glass touch. Instead theres a bit of a plasticy feel. But it has its own nice feeling to it so I'm liking it now. There was also loss of optical clarity, definitely noticeable but not to a first time user. but that was easy for me to get used to.
The anti glare works great! I played a video for my mom, sister and I to watch with the lights on and they were able to see it from the angles they were sitting at. Also, smudges and fingerprints are GREATLY reduced, however they still occur. Fingerprints are only noticeable if your hard press the screen and then look for them in the light. Same goes for facial oils.
All in all I am greatly satisfied with my purchase. I was able to rinse the thing in water, apply it under "steamy" conditions and see the amazing results. Yes there is a significant noticeable loss of clarity and you do lose the smooth glass feeling. But the new feeling is just as easy to get used to and does not interfere with touch sensitivity one bit.
View 7 Replies
View Related
Jun 12, 2010
who has the Clarivue Privacy Screen Protector tell me how it is. Does it affect the way you have to touch the screen at all? Does it effect the sensor when making calls at all?
View 1 Replies
View Related
May 31, 2010
Installed my clarivue last night. It was really easy to install. This really helps with visibility outside, the screen isn't reflective like a mirror anymore. The touch screen doesn't feel as good as naked, but it repels fingerprints so I think it's worth the trade off. Excuse the dust.
View 26 Replies
View Related
Dec 12, 2009
I am hesitant to put one on because the screen is so pretty! I bought the zag I think but it is still in the box because I am afraid I won't like screen after I put it on!
View 10 Replies
View Related
Jul 21, 2010
I picked up a gadget guard (full body) for 13.97 from eBay user jusage. You can also order it from iPhone, iPod, Cell Phone, Cases, Screen Protectors, Shields, Covers by Invisible Gadget Guard.
So I received this, steamed up a room for 10 minutes and then made a little bit of a solution (water and a drop or 2 of dish soap) I then began the process to apply it. Trust me, this isn't easy to apply. The video makes it seem easy but it is actually pretty hard. Now as of now the screen has some soap/water bubbles that are under, but it was pretty easy to squeegee out the big air bubbles. I finished that, but then it slid off again so I had to reapply. After this, I went to the battery cover and I put it on. The back was really easy to apply, I just put it on right onto place and it fit perfectly. The bottom of the back was fairly simple to put on because it runs a little bit small. Now the camera one comes attached to the sides and I tried to put it on. It was WAY to big. The hole for the camera was pretty big, but the sides went way over and just didn't fit at all. Then I tried to put the front cover (over the 3.5 and the bottom) and it just didn't fit at all. The actual product itself is okay ( I honestly hope that the bubbles go away) and it isn't to resistant. It is just about the same feel of the invisible shield.
Overall- I would recommend several other products over this. Personally, I would choose the invisible shield over this. It is much easier to put, and just a better product (the invisible shield is what I mean). I would also suggest the screen protector's from AT&T because I have put them on my past devices. So would I buy this case again? Probably not...
Feel- 7/10
Applying- 3/10 (pretty hard to put on well)
Look- will keep you updated
Look in the sun- will keep you updated
View 2 Replies
View Related
Jan 23, 2010
I can't find any posts that actually have comparison pictures. I've read reviews but need to see physical evidence that one is better then the other. I'm annoyed with the constant finger prints whipping, so I'd imagine that anti-glare would be the preferred choice. Then again I don't know what the contrast will look like afterward. This is my dilemma
View 21 Replies
View Related
May 26, 2010
A few small bubbles, 'prolly my fault. No biggie, can't really see them when the screen is on.
Although the standard Verizon screen protectors don't cover the whole face,I seemed to be able able to squeegee them all out. Also, the feel of the screen wasn't as slick as with the VZ protectors, it was more sticky/resistant when sliding.
I'll hope protection will be what sells me on the Steinheil
View 5 Replies
View Related
Jan 15, 2010
I have a battery, and back door for sale, and a clear screen protector for sale. I upgraded to the 3500 mah battery.
View 2 Replies
View Related
Jul 3, 2010
Seen many threads out there reviewing many screen protectors. Seems like people swing both ways.So, post your 2 cents here. Let us know what you have, what you prefer, what you've tried, and post some pics if you have them!What are the ups and downs of the protectors and the companies who make them?I bought the Sprint Screen Protectors, I had the anti-glare on and liked how it swiped but I messed it up after swapping phones and now have the clear. It's very sticky but I love how my screen pops, as my old one made it look pixel-y. IMO a good clear that swipes well is the way to go.
View 6 Replies
View Related
Dec 5, 2009
I have decided to give the boxwave crystal clear screen protector a try since I use my hero for video now. I have one question about it though. Does it scratch very easily?
View 10 Replies
View Related
Apr 12, 2010
I was thiking of buying either a screen protector from verizon or best buy. I was wondering which is the best to buy out of the two or if there is a better protector? Also what is the best case for the motorola droid? Lastly, when I make phone calls my screen goes black so it is hard for me to end calls. How can i fix this? I don't see any settings for this on the droid.
View 11 Replies
View Related
Nov 4, 2009
Phandroid's Extensive Droid Review with Video Review
View 1 Replies
View Related
Oct 21, 2010
So I recently got a set of screen protectors and put one on.All was well just noticed a few bubbles and so I tried to work them out.They weren't going away, so I figured I would try again so I removed it and to my astonishment the bubbles were still there. It's like they formed under the screen somehow when I put the protector on, they were absolutely not there before.There are 2 in the center of the screen and a few along the edges. At first I just thought it was a water spot but I cannot wipe them off.The ones on the edge of the screen I can"push out" to the edge to almost make them disappear.When you touch them with the pads of your fingers you can feel a slight "bump" in the screen (very minute but still there).They bubbles are easily visible when the screen is off and almost go away when the screen is on but you can still tell they are there.Is this a defect in the phone or did I cause this trying to install the protector? I didn't push down hard on the screen, just applied the protector and they appeared.
View 2 Replies
View Related
Nov 24, 2009
I'm currently using the phantom skinz line and although I like the body protectors I think the screen protector has reduced some of the screen's clarity/sharpness. This wasn't an issue with the static protectors I got from verizon. The only reason I replaced the verizon ones is because they didn't cover the buttons along the bottom of the screen. Anyone find a static protector they like that covers the whole screen?
View 18 Replies
View Related
Aug 4, 2010
I know this has probably been answered a bunch of times. What is the best screen protector to buy? I've heard good things about Ghost Armor and Steinheil protectors. Out of those two, which is the better screen protector?
View 10 Replies
View Related
Aug 29, 2010
I don't know if this is a repost but i got dust under my SGP screen protector and it was really bugging me. I used blue painter's tape and it worked perfectly.
View 2 Replies
View Related
Jun 28, 2010
I have had an Invisible Shield on my droid since I got it. There were a few pieces of dust under it that have been driving me crazy so I decided to take it off. What a difference! It looks better, feels more responsive to touch, and it is a lot smoother when I use pinch to zoom (no friction between my finger and the screen). I am paranoid that I'm going to scratch the screen but the trade off is worth it.
View 17 Replies
View Related
Nov 9, 2009
I bought the Droid Screen Protectors (came in a three pack) from Verizon, and I really don't like them. Every time I touch the phone, it leaves a finger print or a smear mark where I dragged my finger, and i don't really like the texture it adds to the screen. (Maybe I applied it wrong?)Just curious who is using a screen protector, and furthermore if you are, what screen protector are you using?
View 2 Replies
View Related
Nov 14, 2009
As a previous iPhone user I can attest to the quality of screen protectors from Power Support. The matte finish one I used on my iPhone (and the most popular for the iPhone) never detracted a bit from the display clarity and it actually made the display more slippery to the touch. These are the screen protectors they sell in all the Apple sotres. Power Support saidtThey say they're working on one for the Motorola Droid.
View 1 Replies
View Related
Dec 13, 2009
I want to buy an screen protector for the Droid, i usually get invisible shield for everything, but after reading few threads here, there has been couple of members on this forums unhappy with it. So those of you that have an screen protector on your droid, what are you using? r u happy with it? I have tried Wrapsol, and i ended up taking it off right away and going to return it back for an refund because after putting it on, i saw alot of haziness on the screen and it drove me nutz, i don't know if i should have waited for the next day to see if it goes away but it did not look right.
View 38 Replies
View Related
Nov 15, 2009
Probably asked already but couldn't find, just got my Droid what is bet thing for screen protector.do I need one? Had generic ones for BB had to cut them to fit, tried to do one for Droid had all sorts of probs.
View 2 Replies
View Related
Sep 7, 2010
How do you keep dust from getting under the screen protector and the sides of phone and protector. I have vzw screen protector and the vzw shell holster combo.
View 4 Replies
View Related
Jul 27, 2010
Has anyone without a screen protector scratched it yet? Im just curious. I dont really wanna get one because i have never liked them but if i have to i guess i wouldnt mind.
View 32 Replies
View Related
Oct 10, 2010
I didnt realize how good the quality of the display of the phone (anit-glare/smudge i had on made it not shiny any kinda blury)! I might have to leave it off when i get the new/like-new one im getting!! I mean its gorilla glass anyway so its almost scratch proof right?? you guys have screen protection or no? Id like to see the majority
View 13 Replies
View Related
Jan 24, 2010
I recently ordered the invisibleshield protector for the screen of my droid, but it seems the concensus around here is that boxwave is the best.Is there anyone here who uses invisibleshield who can tell me what they think of it? I may send it back for a boxwave when it arrives if i decide to.
View 3 Replies
View Related
Aug 31, 2010
not sure what is going on but its a free full body guard scratch resistant clear skin all you do is pay 3 dollars for shipping i have no idea has anyone else used this? its a stealth guard is this their real site?
View 26 Replies
View Related
Nov 25, 2009
I had one on my old Storm, and I liked it, but I thought I'd post here first to see if any Droid owners have installed it yet. I hate the glare I get on my phone (and fingerprints too), especially while docked in my car. I know this will help but I was a bit hesitant. Anyone have it installed?
View 49 Replies
View Related
Nov 19, 2009
I want to get a screen protector (probably Ghost Armor) but am still considering exchanging the Droid down the road. Will Verizon still take it? Or are protectors easily removable?
View 3 Replies
View Related