So I had a stock 4.3 ROM, rooted, and wanted to flash recovery.. so I accidentally flashed a N7100 recovery, hence, phone couldn't respond to TOUCH at all.
I flashed different ROMs and PIT files in order to solve this but it only kept getting my phone worse.
I can go to Download Mode now so what do I do?
View 6 Replies
Has anyone else noticed this? With the phone laying on a table/counter/couch, the touchscreen normally doesn't respond at all. When it does, it's very glitchy, and pretty useless for anything that requires a swipe (like navigating home screens). I've tried all sorts of combinations of what finger I use, angle, and pressure, but it seems like as soon as I pick up the phone and do the same thing I was doing, it works fine. Just me or no?
View 5 Replies View Relatedmy phone has been running really slow lately. Especially with text messages and phone calls. Sometimes it doesn't even respond to my touch on the screen nor keyboard.any similar stories or solutions?
View 1 Replies View RelatedI have a xi electronics chinese crappy tablet, it came pre rooted. So I changed he cpu governor and I pressed apply, after that it stuck , and I needed to reboot using power and vol -It booted up but now my TouchScreen doesnt respond on my touches!, I have already tried factory reset using adb , didn't work.
View 8 Replies View RelatedI'm using Samsung Galaxy S Plus (I9001).Whenever I connect it to my notebook for charging the touch screen starts acting weird either not responding or responding with lag.I have tried other notebooks, PCs and another USB cables but still problem is there.I also have tried other ROM.
View 2 Replies View RelatedI dropped my phone and the screen won't turn on and doesn't respond to touch.The insurance company is picking it up tomorrow (*hence the urgency) and would like to get some stuff off it. Most stuff is on my exsd, so I'm not too worried if I have to wipe it, but would prefer only to wipe it once everything is off. I'm rooted and have a custom stock based rom and cwm installed.
Is there any way of doing this? I have the lock pattern enabled so when I plug it in nothing shows up.
If not, then how would I wipe it?
I accidentally flashed the wrong recovery onto my LG Optimus V. The phone is stuck in a boot loop and I am unable to make a selection in recovery. How can I flash the correct version of clockwork mod without doing it through the phone?
View 1 Replies View Relatedi have a velocity micro cruze t510 running eken a90 firmware nicely but i cant get cwm recovery to work i have flashed 3 different versions and all three have the same problem. emmc will not mount so im unable to back up. find a custom recovery for the t510
View 1 Replies View RelatedWhen i first got this phone a few months ago i did something stupid. I flashed the wrong cwm recovery with rom manager even though its not supported on my phone. I keep trying to flash a different recovery using the terminal emulator, but to no Avail. Still cant boot into recovery.
View 3 Replies View RelatedI've managed to create a TOUCH Recovery Carliv v2.2 based on CWM V 6.0.4.4 recovery for the Zen Ultrafone 701HD.....
Link for the TOUCH Recovery Carliv v2.2 based on CWM V 6.0.4.4 recovery for the Zen Ultrafone 701HD.....
[URL]
Mirror :
[URL]
Easiest method to have this recovery for a rooted phone is below.
1.Install mobile uncle tools from Play Store.
2. Place the recovery.img provided in root of SD card.( Rename the recovery file as simply RECOVERY.IMG)
3. open mobile uncle tools and flash the recovery.
The other ways may be followed from this link of Dextrorototrix
[URL]
Full credit for this Recovery goes to Yuweng who created the auto tool CWM Magic Create [URL] found in this link [URL], and Carliv who created the recovery that made it so easy to port to new devices, Napster who shared his touch source with Carliv, and of course the original creator of CWM - Kouch. It took many hours of hard work to get us to where we are today.
I have a problem with my LG optimus 4XHD. I didn't like the 4.1.2 lg skinned android so i wanted to install a custom rom. I started by rooting my phone that worked but then i flashed clockworkmod recovery without unlocking the bootloader. Now i can't enter my recovery anymore but i can still boot into android. Now my question is: Can i still unlock the bootloader now without bricking my phone?
View 9 Replies View RelatedI like many of you have been waiting for months to get my hands on the epic. However when I bought one, the battery life was insanely unusable even after 4-5 days. So I finally returned it for a new on. Well find out over the next few days how the battery performs. But the new one has capacitive buttons that barely respond to touch. Particularly the home key and menu key. I've read of a bunch of people having similar problems. Are we just a few unlucky people who happen to be on the forums, or is Samsung having serious Quality control issues here?
View 5 Replies View RelatedI have posted this here because you guys helped me root my Hero with Villain ROM 12, and I wondered if there was a connection...
Since rooting the phone has worked fine for 2+ months, however I now have a MAJOR problem, in that the touch screen is behaving very erratically.
It started with the lower menu bar (All programs, phone and + ) not responding. Now if I touch any icon the phone button goes green, or the phone screen comes up, however I cannot enter any numbers! Sometimes I get a random icon flashing round the screen and I can steer it with my finger, but not activate it!
My concern is that if a have to do a re-set or reinstall, I may not be able to do a backup first, as the relevant keys wont respond. Does anybody have any ideas? Might a re-install of the ROM help?
I was removing stock apps from my /system/app folder, and deleted Launcher2.apk by mistake. The phone couldn't boot properly, so I managed to get the apk from the emulator and install it using adb booting the phone on recovery mode.
Now, my problem is, that Launcher only shows shorcuts to the apps from my /system/app folder. Every apk I put or install on /data/app doesn't apear on the apps view. So there is no way to launch any app unles I manualy move it to system.
I think launcher must read a config file to get the installed apps, and it's failing for some reason. What do you think?
I am using commitva z71 category phone. (motorola quench xt3 xt502).
I had been using cyanogenmod roms on it. presently i have CM 7.1 EAV 7.2. The roms usually came with ADW launcher as default. But one problem I have been facing is that some times my phone does not respond to press of any button, not even power button after ending a call. The screen however goes off and does not light up.
I have to either remove the battery, replace it and restart or I have to make a call to my phone from another phone. When I give a missed call, the phone gets activated. But when I press Menu button, it brings up the keyboard instead of Menu.
This problem has been persisting whichever version of CM Rom I have been using.
The problem aggravates when I use Go Launcher as my default launcher by using Launcher Switcher. When I use ADW as default lanucher but have Go Launcher also on my phone, sometimes the defaults are cleared and I am asked to choose the launcher to finish the task of closing phone app.
Initially, I thought this was the problem of default phone app. So I tried dialer one from play store, but to no avail.
Is there a way to delete the ADW launcher that comes with the custom ROM?
make CWMR touch Recovery for my device with full screen view.I have cw recovery but half side view error. here is my stock recovery in attachment.
View 1 Replies View RelatedFirstt do a FULL FORMAT of the phone with the scatter file provided here. then flash the files ONE BY ONE.
1. Just filash preloader.img * remove battery and usb cable
2. Flash DSP_BL * remove battery and usb cable
3. Flash pro_info * remove battery and usb cable
4. Flash UBOOT.img * remove battery and usb cable
Once this is done, my phone could not boot. does not display.
I have to return my phone to Asurion. I had it rooted, s-off, with the stock recovery flashed back so could receive the OTA upgrade.
Today I put back clockworkmod recovery and applied s-on. I downloaded and tried to flash the stock rom according to the 10 minute video ( [VIDEO] HowTo UnRoot Incredible by downgrading ) put the recovery wouldn't accept it, I guessed cause I was s-on. I then applied s-off again and flashed the stock rom. The stock rom also put back the stock recovery but I was still s-off. I had to reflash CWM to apply s-on.
Now I am almost there except I have the CWM recovery. Not good I downloaded a couple stock recovery files but they will not flash while I am s-on.
I was advised and given a link to download a 2.1 RUU file that is an .exe. I was told to install HTC sync and run it. Either it won't run or I am not doing the right thing with it. I tried it on 2 computers- opened HTC sync, plugged in phone, chose HTC sync, got connection, tried to run the .exe. All I got was a brief dos window. I'm probably doing something wrong here. Can someone tell me how to run this? Or, can I extract the stock recovery from this and flash it? I extracted the files and the recover is in there. I was told it was all signed and legit original stock. Can anyone tell me how to do it if it is possible?
I removed the OS from my N7100 after I messed up with a kernel. Now im trying to reinstall the cyanogen mod but my computer doesnt recognize the phone, and so my only way of flashing anything to the phone is by using Odin, which only accepts .md5 files. I also have Clockworks Mod Recovery but like I said, my computer doesnt recognize my phone as a device
How can I flash cyanogen mod via Odin? When I download it from the official website its not in .md5 format, it's a .zip.
I was downloading an update to a few apps when my phone suddenly froze totally. Can't turn it off or back on. Completely non responsive. This is my only phone so I am trying to find out how to do a hard reset or something similar.
View 4 Replies View RelatedHi there, I have recently got around to rooting my HTC Hero. I have rooted it via the Andoot software and flashed a recovery ROM via the Terminal Emulator. Upon rebooting the phone, I get into the Recovery Menu without any problems. However, if I then boot the phone back up, shutdown again, and then try to get into the Recovery Menu, I have faced with the red triangle with the explanation mark. Any ideas why? Basically, it seems I can only access the Recovery Menu on the first reboot.
View 1 Replies View RelatedIn a WIP for create a CWM for Galaxy Music GT-S6010 I doing a wrong operation.
First at all I've dumped the recovery of my phone and used CWM builder online, but the recovery didn't work.
I have founded a recovery of another smartphone that I think has similar hardware, the GT-S5310. I have flashed the CWM recovery of this other phone and the result is:
1) The CWM work. It seems to work well.
2) The touch screen behavior is bad. Is incorrect and inverted. In some point when touch with one finger the result give two touch.
I think that the problem is software not hardware, because with bluetooth mouse and keyboard the phone work well.
I have already tried many times, in this order:
1) restore the original recovery;
2) flash the stock firmware;
3) flash the CWM, doing a clean cache, format /sysem, format /cache, clean dalvik cache;
But not solved.
[Guide] How to install ClockworkMod Touch Recovery On Huawei Honor 3 HN3-U01
Before You Begin
◘ Root your Huawei Honor 3
Required Files
◘ TouchRecoveryInstaller-v1_01.apk
Installation
◘ Install TouchRecoveryInstaller-v1_01.apk on your device.
◘ Open the Application and tap "Install Recovery". (grant SuperUser access)
◘ After Installation tap "Reboot into Recovery" to boot into recovery mode.
Backup of the original factory rom MPAI N7100 for flashing with SP FlashTool. Turns mistakenly install a rom upai N7100 and now I have the screen upside down and did a backup of my original rom.
View 2 Replies View Related I am a longtime iPhone user and I have recently been given a Samsung Galaxy S3 by my employer. In the past I have just used my old Android phone for Tethering with FoxFi so I can have web access at work on my laptop. I literally never made any phone calls with it for over 2 years. I have had the calls forwarded from my Verizon Android phone to my ATT iPhone since the day I got it.
Currently I have a (PERSONAL) iPhone 4 on AT&T with a 3G connection and I have this (WORK CELL) Samsung Galaxy 3 on Verizon 4G LTE.
I would like the ability to fully test out the S3 and leave the iPhone at home if I so choose. Call forwarding either way is not a problem at all. I can forward my iPhone personal calls to my work cell and I can forward my work cell calls to my iPhone (Currently this is how I have it). Call forwarding works great but I am looking for a way to handle text messages in a similar manner.
I would like to have the ability to send and receive text messages using my personal number from my Android Phone. I have Google Voice installed on both phones but I cant seem to get it to work at all or I am not setting it up correctly. I would not mind having texts show up on both devices or in my Gmail inbox. There has to be a way to do this. That way if I leave either phone at home it not a big deal I don't have to carry two phones. Nobody ever texts my work number, my only texts received are to my personal cell.
I ordered Asphalt 8 and i went to Multiplayer mode I found its only playable uaing wifi not the 3G I dont have wifi , and even the 3g is faster than my wifi Is there any way to play asphalt via 3g not wifi ?
View 9 Replies View RelatedI've tried to flash a rom with sp flash tool, and my allview viper (AKA blu life play100, gionee elife e3, or else model) died. nothing appears on the display, even when i put to charging.
View 2 Replies View RelatedWhen I'm on a call my phone's screen goes off and stays off, and NONE of the buttons work - power button, volume, home, menu, back, search nothing.The call is still going through and I can talk and hear just fine, it's that nothing else works on the phone. I can't even hang up on the call.I have to wait for the other caller to hang up first.I've installed Keepscreen, adjusted display settings, and have done a hard reset. It still behaves the same. Any ideas?
View 9 Replies View RelatedMay i know why does my xperia x10 couldn't use its bluetooth? my xperia x10 is using 1.6 software.can anybody help me regarding this issue?
View 1 Replies View Related1. Has anyone tried to opt out of the contract without paying the ridiculous $300+ dollar fee?
2. When someone calls me, they hear the tone (idk the proper name) for 3 times, and only then my phone starts ringing. How can i make it so that my phone will respond quicker to calls?