General :: Unzip Flashable Zips
May 26, 2013Possible to unzip a flashable zip, mod a few files and then rezip it and flash it? SAMSUNG-SGH-I717
View 3 RepliesPossible to unzip a flashable zip, mod a few files and then rezip it and flash it? SAMSUNG-SGH-I717
View 3 Repliesflashable zips so I can enable Beats Audio, xLoud and Bravia Engine on my device running 4.3.
View 1 Replies View RelatedI have a Mytouch 3g with 3.5mm that will not boot past the "HTC magic" screen. I know the first boot after flashing a new rom is supposed to take a while because I've done it before successfully, but this time I've left it for hours and when I come back the phone is dead, so I fully charge the battery and try again, same thing.
I can still get to Hboot (maybe there's hope?) and this is what I see:
SAPPHIRE UNKNOWN 32A ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
I need a way to sign zip packages so they can be flashed in CWM with signature verification enabled...
I tried with jarsigner but I can't understand why CWM doesn't flash (signature verification failed)...
is there any way to add/change a file in an official ruu rom?
Like using the old sappimg from the sapphire (htc magic)
if i understand correctly the phone looks at the android-info.txt for version main and on that info it flashes the phone. Correct me if i'm wrong, now we can open those zip files but we can't add or change files in it. I know those files are signed. but there must be a way to mod those files and put them back on the phones. i tried a lot of zip,rar etc utils to modify but all say mode not implemented.
I have some zip archives people sent me that I cannot unzip on my phone or on my PC! I believe when these files were compressed, the source files to be extracted were multiple folder levels deep. I cannot extract them on my phone with any app I have tried, and when I try to use Unrar or 7-Zip on my PC, it says the files are corrupt.
Is there an Android app that can drill down to the lowest folder level to extract files?
I am in the need of the Info-zip unzip (and zip) binary for bash scripts, compiled for Android.The unzip included in busybox does not have the features that I need and the 7za and unrar binaries that I have do not have features needed also.
View 4 Replies View RelatedI'm looking to install a rom via CWM without using adb. What is the adb commands to do this? I've found a thread about how to do this for Amon_RA's recovery but nothing for CWM.
Amon_RA tutorial: [URL] .....
I am looking for a android file manager, that can delete a apk without unzipping it, right on your phone.
View 9 Replies View Relatedim wondering is there such way to create a zip file with multiple zips in to flash at once? Purpose of it is to save time flashing 5 different zips through recovery every time we flash new roms?
View 2 Replies View RelatedThe format of recovery that we download from official website is .img. How can we make it a cm flashable zip?
HTC One X+
I know people talk about this all the time... I found a lot of thread of how to create a flashable zip file.. But every thread has it different than others. So I have tried it several ways and still get errors...
I'm trying to make a flashable zip to push an apk to system/app and I decided to do this to test it out...
This is the update-script I have tested it with
run_program("/sbin/busybox", "mount", "/system");
delete("/system/app/FlashBarService.apk");
package_extract_dir("system", "/system");
run_program("/sbin/busybox", "unmount", "/system");
Ok what I figure is the run_program is to mount system with busybox. Every line i see that it have this on there.. Then Im trying to replace an app from system/app so I put in delete("/system/app/name of app");
then package_extract_dir("system", :/system"); is so recovery can extract and push the zip file
and again run_program to unmount... But recovery is giving me an error status 4
I also deleted that delete line and still got status 4.
Again this is another way I tried it to do it with
run_program("/sbin/busybox", "mount", "/system");
run_program("/sbin/busybox", "mount", "/cache");
run_program("/sbin/busybox", "mount", "/data");
package_extract_dir("system", "/system");
run_program("/sbin/busybox", "umount", "/system");
run_program("/sbin/busybox", "umount", "/cache");
run_program("/sbin/busybox", "umount", "/data");
And this way too
mount("ext4", "EMMC", "/dev/block/mmcblk0p14", "/system");
mount("ext4", "EMMC", "/dev/block/mmcblk0p14", "/data");
package_extract_dir("system", "/system");
run_program("/sbin/busybox", "unmount", "/system");
run_program("/sbin/busybox", "unmount", "/data");
And till got status 4.
Inside my xxx.zip I have it set up this way META-INF/com/google/android
And other folder on root system/app
I have a GS3.
Like I said I have followed several threads about this and all looks different and none worked.
I know this is supposed to be the easies thing to do when it comes to android. But I just need to be directed to the right path.
I want to replace my stock screenlock on CM7 to Widgetlocker.
I know that I have to make a flashable zip and install it under the recovery.
I don't know how to make this flashable zip with Widgetlocker.
How can I make a flashabe uninstaller for system app?
View 1 Replies View RelatedI noticed every flashable zip has one. If i merge to flashable zips what do I do with the update-binary? Is it important?
View 1 Replies View RelatedCan create a cwm flashable zip for my given .apk file
View 1 Replies View RelatedI have a problem using this method URL>..Thats is there any other way to have a CWM Recovery in my ZTE V793?Like Flashing Zip using Stock Recovery or Something..
Also is there a way i can Maximze the capacity of my Internal Memory.Like using Swap Partion or Ungaze Data2SD?
GT-N7100. Q. How to make an apk into flash able zip for recovery?
View 2 Replies View RelatedI want to install apps normal with a zip in cwm.
I know how to create a flashable zip with systemapps. But some apps give me fc when installing as systemapp.
Now I want to create a flashable zip for normal apps that will be installed automatic.
i want to create a flash-able zip of PA's HALO for my stock and rooted nexus 4. For all i know i must take the commit files and merge them in my recompiled ROM's folder, compile them and flash (or maybe try to run it in an android emulator first?) Well i'm facing a lot of problem: 1 i can't even get git commit files (yes i have git installed) 2 even if i succeed to get the files and compile my ROM and it all works flawless i don't know how to make HALO as a flashable mod.
View 1 Replies View RelatedHow to make a flashable zip of a single app with its data ??
View 4 Replies View RelatedIs there a way i can get the transition animation as a flashable zip or something easy as seen in the attached video? [URL]...
View 4 Replies View RelatedI've never made a rom now do I know how. I'm just broke and have a horrible computer its so bad I haven't used it since I got my evo 4G. Anyway I'm not new to flashing, modding or anything to do with my evo. What I like to do is flash a rom as a base then find other tweaks and mods and flash them. remove things the developer put in and maybe replace them with other thing I find from other roms. Eventually I have a custom "rom" mostly unrecognizable from my original base. My question is, is it possible to nand my "rom" and turn it into a flashable rom to share with the community?
View 9 Replies View RelatedSo, my question: Is it possible to turn a rom from Odin format (.tar/.tar.md5 etc) into a flashable zip? If yes, how?
My intention was to customize a stock rom for the gt-s7500, with dsixda's kitchen, that apparently supports only flashable zips.
I just wanted to know if there is a way to make my navbar transparent (without decompiling and all that). I have searched all over XDA but found nothing on what I want.
View 3 Replies View RelatedIn other words, if I had a zip file that replaced the framework-res.apk, would it work on any phone or tablet? I know the app wouldn't, but would the zip file?
View 2 Replies View RelatedI'm planning on using the UpdatezipCreator from this thread http[URL].... to build an update script for some APK updates I want to package up. It appears this app has the ability to build a update-binary file for you.
I have APK files in both the system/app and data/app that I want to be copied to my phone.
First thing, can I have multiple destinations for the files in the script? I haven't found any examples with two destinations and there doesn't seem to be a spot to configure the source which makes me think it just takes everything in the zip and puts it in the folder you specifiy in the package_extract_dir function and that adding a second "package_extract_dir" function would confuse it.
The second question is I keep running across scripts that us busybox instead of the built in commands. Why would you need to/want to do that?This is what I would think would work for my script:
Code:
ui_print("Preparing to update");
ui_print("Copying files..");
package_extract_dir("system", "/system");[CODE].....
so I've been searching around but I couldn't find any clues. Right now I have a complete system dump for a HTC One Rom. How could add root to it and make it flashable via recovery?
View 4 Replies View Relatedi was wondering if there is a way to create a zip package to flash through CWM, in order to install various apks simoultaneously... You know, when i flash a new rom i get bored of having to reinstall everything, and Titanium backup doesn't work properly... so i wanted to create a pack with all my favourite apps, and install them all in once!
View 1 Replies View RelatedIs their is a way so i can sign a flashable .zip file so i can flash it on stock non rooted samsung device ? When I try any flashable zip i get " E: signature verification failed".
View 1 Replies View Related