General :: Tethering Setup - No Access To Network
May 21, 2013
I have a problem ( but i think that's more my setup problem).
My phone: i9100g
Rom tested: CM10, SlimBean v5
Neither wifi/usb tethering are working, when I connect my phone to pc it tells me "no access to network".
I'm having same problem with different roms,so i think that i should change my settings,and it's not a bug of the rom. My default APN at "APN Type" was "default,supl". i Have changed to "default,supl,dun" but nothing,tethering doesn't work.
View 2 Replies
Apr 16, 2013
I need to change the network address of android tethering mode. The default network is 192.168.43.x/24, i need to set it at 192.168.16.x/24, is it possible?
otherwise how can i create a bridge or something else beetwen 2 different network interfaces?
Because i've a scale connected to my android phone (192.168.43.x), the phone is connected to a VPN (192.168.16.x) and from a PC i must be able to "talk" to the scale.
View 1 Replies
View Related
Mar 23, 2012
I'd like to offer a public access through Android Tablets via Tethering.The problem is that in France I have to log IPs and visited Websites when I provide a public wifi access.I searched in the Android doc but I have not found anything.
View 3 Replies
View Related
May 31, 2012
Assuming the following:
Android 2.3.7 device is connected to an IPv6 internet connection
Tethering is legal for your device/carrier
The ipv6-test gives 10/10 (perfect score) for IPv6 readiness for your phone, and you can access e.g. [URL] ..... using the phone itself
You want to tether to a PC using USB
Device is rooted
Is there a way to give the PC access to the phone's IPv6 internet connection?
I'm assuming that we can't give the PC a public IPv6 address, because the phone is probably only allotted one IPv6 address from the carrier; plus they might treat your plan differently or something if you try to claim another IP address (it's an unnecessary complexity)
So what we actually need to do is, to create a NAT IPv6 space on the device, just like we do for IPv4 when we tether, and provision an IP to the PC that way. Then we have to do something for DNS; I guess we can use OpenDNS's AAAA servers.
Do any of the existing tethering methods support this at all, or is this something I'd have to do manually? Also, is it possible even in theory on Android 2.3, or is it known that a newer version of Android will enable it?
View 1 Replies
View Related
Apr 20, 2013
how to setup and access favorites using Handcent MMS. Apparently they don't respond to requests.
View 1 Replies
View Related
Nov 2, 2010
What is better for tethering easytether or pdanet? I am looking at maybe buying one for when I travel and would like to see which one everyone likes, I am leaning towards easytether because it is cheaper. Also I have an Evo running 2.2 and a mac computer so I am looking for the one that will work best with that setup.
View 9 Replies
View Related
Apr 7, 2012
I have a tablet Samsung GT P6210 Galaxy Tab (Tab Plus 7'') with honeycomb Android OS 3.2. It's root, but does not have access to Ad-hoc network.
View 1 Replies
View Related
Mar 16, 2010
EDIT: This guide is obsolete now with the latest 0_3 rom. Feel free to delete this thread mods.
View 47 Replies
View Related
Jun 13, 2012
Briefly, I need ONLY ONE of my apps to access the data mobile network while the other ones remain blocked but when I connect to a Wi-Fi I need them all to be connected, how can I do this?
View 2 Replies
View Related
May 17, 2012
My company has a guest Wifi network and a regular employee wifi network that requires a password. I was wondering if I were to access the guest wifi network using my own personal smartphone, what kind of privacy would I have?
Are there any easy apps to encrypt myself while on it? I see SSH Tunnel and Connectbot, but I don't have a server.
View 1 Replies
View Related
Aug 29, 2012
At the first loading of flashed rom checkbox "Data Allowed" in the Mobile Network Settings ENABLED by default.
I do not use unlimited Internet therefore.
I need some flashable patch update.zip which I can flash after the rom for switching this option to DISABLE.
It is Really? Where android save this setting?
View 5 Replies
View Related
Sep 30, 2010
I have unlimited data on my tariff but it says tethering is not allowed. But how will the network provider know that i am tethering, can they find out easily? Also by using a tether app will that hide if i am tethering? Wireless Tether for Root Users - Android app on AppBrain.
View 2 Replies
View Related
Oct 22, 2010
I am trying to test some udp networking between emulator and host and I have a problem with setup. I assigned address 10.0.2.14 to the host interface with 10.0.2.1 as gateway.. Can't ping 10.0.2.15 from my host, neither can i ping 10.0.2.14 from emulator. Ping from emulator to 10.0.2.2 works fine - I can capture that ICMP traffic on the loop back interface of my host, so ICMP works, but how can i create traffic from the host to emulator? Can someone point me how to make it work? Note: firewall on my host is disabled.
View 3 Replies
View Related
Aug 19, 2010
What i want is my computer to use my phones connection to access the internet is this possible? i get an ad hoc connection but i cant get my computer onto the internet.
View 4 Replies
View Related
Mar 25, 2009
I can not access the external network because of DNS problem, below is my steps:
1. Setup DNS ./adb shell setprop net.dns1 xx.xx.xx.xx
I can successful access the internal network withou setting the http_proxy, such as my.mycomany.com
2. Setup proxy Setup the http_proxy environment variable on the host, and setup the dns server in Android.
Access the external network in browser, such as www.google.com. It report "Web page not available", the log of logcat say that: I/InetAddress( 187): Unknown host www.google.com, throwing UnknownHostException E/browser ( 187): onReceivedError code:-2 The URL could not be found.
Setting the http_proxy in "sqlite3 /data/data/ com.android.providers.settings/databases/settings.db" also does not work.
I guess it is the dns issue. But strange that the DNS can work for internal network, but can not work for external network.
Does anyone know how to fix this issue?
View 7 Replies
View Related
Aug 11, 2010
I bought my Xperia x10 mini yesterday, and one of the first things I did was to set it up for WiFi in my house (which I already have 2 laptops and a stationary PC connected to). Setting it up was easy and quick, but my phone doesn't find the network, not even if I am standing right beside the router. I have tried to restart the WiFi connection, restart my phone, delete and re-add the home connection, but the phone still doesn't connect to the network.
The network's SSID isn't broadcasted for security reasons, could this be the problem? When I search for networks, it doesn't find any 'unnamed' networks like the windows pcs do. (which is normally the one I need to connect to.) Is there something wrong with my hardware? Or my software (my phone is completely up-to-date)? (Except broadcast the SSID, which is not an option..)
View 3 Replies
View Related
Apr 29, 2010
As the title eludes to.. I was wondering if I can access my DInk through my wireless home network rather than hooking it up to the computer? Sorry if this was posted earlier, I did a couple searches and couldn't find anything.
View 5 Replies
View Related
Sep 21, 2010
Android Version: 2.2 T-Mobile branded
Network: Base - a brand of e-plus, Germany
Taskiller Used: None
Issue: Switch on tethering OR mobile hotspot ->mobile network dies
I've installed Froyo on a T-Mobile branded Desire. After the update, turning on USB tethering leads to immediate loss of mobile network - it just turns itself off. Same goes for the mobile Wifi hotspot: turn on -> for 2 seconds, it's working -> mobile network drops off. Moving into airplane mode and back brings back the network, but tethering is a goner. With 2.1, USB tethering had worked. I'm on Base, a brand of e-plus. I've talked to their customer services, they say Base absolutely supports tethering.
View 3 Replies
View Related
Mar 16, 2010
I am trying to use a certain wrapper of HttpClient, called HTTPRequestHelper with an associated responseHandler as the basic class for my wrapper to a web service which is implemented as a singleton.
HTTPRequestHelper and samples of usage are described in chapter 6 of "Unlocking Android" published by Manning.
My problem is that invoking both the helper and the handler from a thread started on the main UI thread (either from an AsyncTask or directly) works only sporadically.
Here is the basic setup.
public class APIService { private ArrayList<Something> myThing;
CODE:.................
View 2 Replies
View Related
Aug 5, 2010
I've noticed very poor performance in the emulator (1.6 and 2.1) when trying to complete the forth statement below. It will take 5+ minutes running in the emulator. Interestingly, when I debug on my phone it's not nearly as bad at maybe a minute or so, but still not great. Running the app on my phone without debugging yields great performance (seconds). URL url = new URL(CommonProperties.BASE_SERVICE_URL + "param=1"); DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); DocumentBuilder builder = factory.newDocumentBuilder(); Document dom = builder.parse(url.openConnection(). getInputStream()); is there something I can do to speed up network access while using the emulator? Has anyone noticed anything similar?
View 2 Replies
View Related
Oct 30, 2008
Any of you receive the following error when trying to access the Market?
=========================================
Attention
-------------------
A server error has occurred.
Retry, or cancel and return to
the previous screen.
[Retry] [Cancel]
=========================================
View 5 Replies
View Related
Jul 16, 2010
I have some code that uses a network connection. I create a connection by calling openConnection() on a URL object. Is there any documentation that explains how this process works? Which access point is being used? When that access point becomes invalid, will it automatically switch to another accespoint? etc. I would like to use only WiFi access points and otherwise fail even tho 3G or GPRS could be available, is that possible?
View 7 Replies
View Related
Mar 10, 2009
I install sdk on centos.At first it works well. But I encounter a strange issue:One day my emulator can not access it's host os's network any more.
View 2 Replies
View Related
Aug 23, 2010
I don't have a SIM inserted. I have firmware "2.1-update1". If I connect to WiFi and go to system software updates it says "there are no updates available for your phone". Do I actually need to be connected to a network to update to froyo? I'm in Australia.
View 4 Replies
View Related
Mar 21, 2010
I'm using a combination of alarm (set with AlarmManager) and background service to periodically synchronize data in my application. The only problem I have is that when sleep policy terminates Wi-Fi connection the synchronization no longer works. Is there a way to "wake up" the Wi-Fi connection that has been put to sleep? GMail somehow manages to do that because it notifies me about new e-mail even if the phone entered sleep mode.
View 2 Replies
View Related
Nov 26, 2010
I upgraded my Xperia X10 two weeks ago and its working good. The only problem i have is i can't access a 3G network anymore. All the places i used to be able to get 3G reception when i was running 1.6 no longer work. I get G, E and H networks which are all really slow.
View 4 Replies
View Related
Sep 23, 2009
Can anyone tell me if it's possible to access Mac or Windows network shares on the Hero when I am connected to the network via Wi-Fi?
View 18 Replies
View Related
Feb 3, 2010
Is there a way to force all my requests to be made through my APN and not through wifi, without having to disable WiFi? I want to know if it is possible for my application to use exclusively the network access point. I'm already able to set the default network APN and to use it but for this I have to disable the Wifi first.
View 1 Replies
View Related
Jun 22, 2009
How to enable/disable Access Point Network (APN)?
View 2 Replies
View Related
Oct 25, 2010
So I got my Captivate this weekend, and have been using it on my WiFi at the apartment and everything is working fine. But today I went to work, and now any webpage I try to access just shows up as a blank white page with the words "Access Forbidden". Other apps work just fine, I just can't visit any webpages. I'm definitely connected to 3G, with a strong signal strength. I read in one thread that clearing APN proxy settings solved this problem for them, but I can't find any way to edit the APN settings on my phone (can only view them). I read another thread that this happens to people who switch over from an IPhone; only problem is, I've never owned an IPhone. I'm contemplating giving AT&T customer support a call, but wanted to check here first to see if anyone else is having this problem/has a fix. Here are my APN settings in case this clears anything up:
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN type: internet + mms
These are the default phone settings and it won't let me change any of them, although it will let me create a new APN and edit the settings of that. It seems odd that the default APN is Cingular...that is the service I had years ago, but it merged with AT&T a while back.
View 2 Replies
View Related
