General :: SD Card Not Detected In Recovery (TWRP)
Feb 5, 2013
My tablet is: Asus Transformer TF300T (rooted)
What I did:
- I accidentally wiped all data in tablet - ROM, etc. Only left is Team Win Recovery Project (TWRP) v2.2.0 recovery
- I put Android.zip (installation files) into MicroSD Card / uSD Card
- I boot into recovery (TWRP)
- TWRP does not read/detect the SD Card
- There is no files in /sdcard except one; /sdcard/TWRP/.twrps
I also
- installed adb on PC
- did 'adb devices' - no device detected when connect between tablet and PC How?
View 2 Replies
May 26, 2013
TWRP recovery won't see the internal storage on my phone anymore. It did, then I flashed TrickDroid and chose the "wipe" option, and now it won't. I've flashed CWM and that works, but TWRP won't, which sucks, because I only have a backup in TWRP and I haven't found a way to restore in CWM from a TWRP backup.
View 3 Replies
View Related
Jul 3, 2013
So right now i am using TWRP 2.5 for the htc one v (cdma) and wanted to switch to CWM touch but when i download it from ClockWorkMod's website it gives me a zip file (so i cant fastboot flash it) and when i install it through my recovery it loads it up once but then the next time i boot into recovery it's back to twrp. get the CWM recovery to stick?
View 1 Replies
View Related
Feb 5, 2014
I have an AT&T SGS4 with a melted USB port so there is no way for me to use fastboot or Odin to flash bootloaders, etc. Is it possible to flash a Samsung factory bootloader through recovery?
What I am trying to accomplish:
I am on Touchwiz 4.3 and the 4.4.2 KK release was leaked in our forum. I used the dsixda kitchen to break it down and made a ROM out of it that successfully flashed in recovery but kernel panics at the AT&T splash boot screen because the RAMdisk doesn't match the bootloader version. So I need to upgrade the bootloader to the 4.4.2 version so it will boot.
I unpacked the RAMdisk and there is nothing in any of the init.xx files that points to the bootloader. I even used a hex editor to look at the init binary which references the bootloader but there was nothing in there that I could change (from what I saw).
View 4 Replies
View Related
May 3, 2013
I have rooted my Micromax A116 and have installed CWM recovery. I need to install TWRP recovery. Can I do it or is it possible to install TWRP after installing CWM?
View 3 Replies
View Related
Feb 11, 2014
Is it possible to flash new ROM in TWRP recovery from internal storage without using PC. I moved new ROM to my phone and i can see it in TWRP but is it safe to install it like that? Should i move new ROM in some specific folder first or not?
View 1 Replies
View Related
Nov 11, 2013
When installing certain custom ROMs on rooted Android smartphones or tablets, you will encounter Status 7″ error issues once in awhile with ClockworkMod (CWM) Recovery.Status 7 error is caused while the ROM's updater script file checks to see if the phone model of your phone is compatible with the ROM you are installing, called asserts.
Asserts is a safety mechanism so you don't accidentally install another phone model ROM on your phone. E.g. You tried to install Galaxy S2 ROM on a Galaxy S3 and ending up hard-bricking your phone but you got Status 7 error which saved you.this safety mechanism is great but there are times where even if you have the correct ROM for your phone, you will get Status 7 error.
This is due to an error by the developer of the ROM in the updater script, causing havoc, making people install another custom recovery like TWRP recovery for no reason. You can fix the issue by installing TWRP recovery but if you need to restore your CWM backups later down the line, you will have to re-install CWM recovery, causing a big hassle.
Also, if you update to the latest CWM Recovery using ROM Manager, usually this problem is fixed.But what if you did update to the latest CWM Recovery and still happens? And yes, it does happen even when you update your CWM recovery.
If you simply don't want to change your recovery (because if it ain't broke, don't fix it) or you still get Status 7 error after changing recovery, you can simply edit the updater script yourself to get rid of the asserts.All you need is a computer and a zipping program! (You might be able to even do it on your Android device with AndroZip and text editor but I haven't tried yet.) MAKE SURE THE ROM YOU ARE INSTALLING IS COMPATIBLE WITH YOUR ANDROID DEVICE AS INSTALLING WRONG ROM CAN BRICK YOUR DEVICE!
Make sure if you are installing a ROM on AT&T Galaxy S3, the ROM zip file you downloaded is for AT&T Galaxy S3 not for Verizon Galaxy S3.
Step 1. Copy the ROM zip file to your computer and extract it using your favorite unzipping software.
Step 2. Once unzipped, browse to the META-INF/com/Google/android directory. You will find two files called update-binary and updater-script.
Step 3. Rename updater-script to updater-script.txt and open with your favorite text file editor.
Step 4. Get rid of the line starting with assert to next semi-colon. Usually this is the first line or one of the first lines at the top of the text file. Just delete them.
Step 5. Save file.
Step 6. Rename updater-script.txt back to updater-script.
Step 7. Rezip all the files yo've unzipped.
Step 8. Copy the new, edited zip file to your phone.
Step 9. Try re-installing ROM, now it should install fine without Status 7 error.
View 9 Replies
View Related
Mar 23, 2013
I formatted the internal SD card through CWM and now the card cannot be recognized by Win7 and it's stated as a linux file-CD Gadget USB Device, and the drives are greyed out. How do I revert the SD Card back to FAT32 format?
I'm also unable to mount it as USB storage in CWM recovery giving an error of cannot write to lumfile (no such file and directory). However, I'm able to still format the sdcard in cwm but it does not solve the problem.
View 1 Replies
View Related
Nov 6, 2013
i had custom PMP light rom installed on my device. i then wanted to install SilverNexus kernel given here:URL.... so downloaded it & flashed it via CWM recovery
after that it keeps boot looping, also cant enter into CWM recovery. can't even install old kernel via Odin. odin is not detecting it anymore.somehow if i can replace my old kernel files read many threads. seems like Heimdall....but i m getting "ERROR: Failed to initialise protocol!" wen trying to generate pit file
View 1 Replies
View Related
Jun 13, 2012
how can I access the internal memory so that I can copy the ROM, my y5 is stuck on the boot logo now.. the recovery mode cant detect the sd card. is there anyway around to access this internal memory so that I can copy the ROM.
View 9 Replies
View Related
Apr 24, 2012
I deleted /system folder on my nexian cosmic journey. And now my nexian is stuck...
I try to using fastboot mode to flash recovery image, but my device seems not detected. I already installed the android composite driver, but when i use "fastboot devices" command, it shows (?) So how the heck to get my nexian back to normal?..
Or perhaps, if i just be able to put back the /system folder to its place again, it would be more easy to recover it... But how access the root when phone is like that?
View 1 Replies
View Related
Sep 15, 2013
I have a sd card that was working on my phone, suddenly sd card stopped working and my phone cant detect him. I tried to connect on my pc and my pc also dont detect it. Tried in various ways, tried with usb phone cable, tried with card reader tried with usb card reader, my sd card is just not detected.
I Also tried various softwares to format it but i cant do anything because nothing detect the card.
Please dont tell me to format sdcard, or mount sdcard in phone etc.... cant do anything because i cant acces that option because sdcard IS NOT DETECTED!
- Sd card is not locked
-kingston 16 gb micro sd HC
View 24 Replies
View Related
Mar 23, 2012
My phone has so signal at all
It says "no sim card"
there's an 'x' in signal bar
airplane mode is always on and if you turn it off, is stucks saying "enabling wireless connections" and doesn't turn off
mobile network settings are disabled
Status:
My phone number: unknown
Network: unknown
Mobile network type: unknown
It happened after I flash my phone with cyanogenmod ROM, i flashed a couple of google apps and a custom kernel. I THINK when i clicked a certain CPU speed in overclocking, it kinda stuck and restarted and had no signal at all... I flashed it again a couple of times even the beta cyanogenmod and dardroidXD, factory reset, wipe data, cache, remove battery. i flashed it with the original firmware with different version but still no avail..
View 7 Replies
View Related
Apr 17, 2010
When i start my phone it says: No SD card detected.Application can't run normally.Though I cant find a problem when I usse the fone..all music is on etc..Would like to know if this does only my Desire.
View 8 Replies
View Related
Aug 2, 2010
There has been talk in the Desire forum of the fault where the SD card will no longer be detected by the phone.It will suggest reformatting. But resetting phone or reinserting card is often the required action to take.I have not heard of anyone else having this problem on the Hero (1.5) but it is driving me bonkers. The shipped 2Gb card worked ok. A new 4Gb had this problem. I have send this one card back to ScanDisk. The second 4Gb card eventually corrupted so badly it will no longer reformat. And the third 4Gb card will not remain recognised for more than a few minutes. Making the phone unusable.I am wondering if any other Hero users have experienced this.I do not know for sure if this is a HTC issue a card issue or and Android issue.
View 4 Replies
View Related
Nov 4, 2013
I own a GIONEE P2 mobile phone with MTK6572 processor and android 4.2.2. I successfully rooted the phone and it was working fine until my internet stopped one morning and upon restarting the phone, it wrote SIM1: SIM card not detected, SIM2: sim card not detected. I have tried all I could yet no avail as I can't use SIM card in the phone. I used MTK droid tool but nothing could be done, also entering engineering mode with ##4636##, the radio remained permanently turned off and couldn't turn on. I used IMEI tools to rewrite and replace the NVRAM files yet nothing happened. it has been very frustrating trying to find a solution but none found. WIFI and bluetooth still work fine.
View 1 Replies
View Related
Oct 13, 2010
well I know I took pictures and I can see them using the USB cable but when I open the gallery it tells me there is nothing there.I also get a message about no SD card detected even though its there and I can see it just fine if I go into the SD card menu in the settings menu and also if it is plugged into a computer also there are pictures that I took today that arent even showing up when I plug it into the computer.I cant even read my SD card if I take it out and put it into that adapter it came with but plugging the phone into USB I can read the SD card thats in there - or I can see some pictures that I have taken
View 4 Replies
View Related
Nov 15, 2010
I bought a new Sony Ericsson X10 xperia mini pro.. it has a 2GB memory card..but since i want to expand the memory i bought a new 8 GB memory card and inserted it..and when i restart the phone, the phone shows SD card removed. Insert a new one. And definitely the SD card is not corrupted since it works fine on the other phones. If the problem is with my phone then it should not be detecting the 2 GB card but it detects only that card and not the new one.
View 2 Replies
View Related
Apr 6, 2014
I have the OG Motorola Droid A855. I installed the 4.1 Jelly Bean mod onto it. I'd like to move my apps to the sd card - however, the "Move to SD Card" option on my phone is grey and unusable.
I'd like to do so with Clockworkmod recovery. However, I cannot do so because my Clockworkmod recovery does Not have the partition SD Card option (it is v2.5.0.1).
How am I supposed to partition my SD Card without this option within Clockworkmod? What is another way to do so?
View 1 Replies
View Related
Apr 28, 2013
I rooted my phone and this morning I attempted flashing a ROM called ViperOneS that you can look at here --URL.... So in order to install it the OP wrote in the instructions to factory restore the phone which I did. When I cleared the cache and everything and went to install it TWRP said it failed so I just erased it. Then when I went to reboot it was stuck on the screen with the red writing so I rebooted it in Recovery and it said there was no OS installed. I looked for this problem online and found that if I mounted the phone to my computer I could copy and paste a new ROM for my phone which I eventually tried to do but for some reason it does not allow me to check off either of the boxes next to "Mount SD Card" or "Mount Internal." It does let me mark all the other boxes. what I should do so the computer recognizes the phone as a "Removable Disk" like it used to so I can just drag and drop a new OS into my phone and put this thing behind me already?
View 1 Replies
View Related
Jun 21, 2012
Dropped my E4G, and I suppose in the impact the continuity between the card and socket were broken, and, well, I now have a useless sd card until I format it.
Problem is, I have very important photos on this card I would REALLY like to get off because they are not able to be replaced. Pictures of my daughter.I have tried EaseUS and Minitool, which did not work. Tried chkdsk, but the card is listed as RAW, so no go.
View 2 Replies
View Related
Feb 2, 2013
I rooted my phone and wanted to put custom ROM.So had my rom file in my sd card and as well as CWM recovery file. As soon as i go to recovery mode i have these options.I am using samsung galaxy y duos gt-s6102
Reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
I don't have install .zp from sd card option ?? And when i click apply update from sd card it shows this error :
E:failed to mount /sdcard (No such file or directory)
E:Can't mount /sdcard
Install from sdcard complete
View 9 Replies
View Related
Apr 28, 2013
I rooted my phone and this morning I attempted flashing a ROM called ViperOneS that you can look at here --> [URL].... So in order to install it the OP wrote in the instructions to factory restore the phone which I did. When I cleared the cache and everything and went to install it TWRP said it failed so I just erased it. Then when I went to reboot it was stuck on the screen with the red writing so I rebooted it in Recovery and it said there was no OS installed.
I looked for this problem online and found that if I mounted the phone to my computer I could copy and paste a new ROM for my phone which I eventually tried to do but for some reason it does not allow me to check off either of the boxes next to "Mount SD Card" or "Mount Internal." It does let me mark all the other boxes. What I should do so the computer recognizes the phone as a "Removable Disk" like it used to so I can just drag and drop a new OS into my phone and put this thing behind me already?
View 5 Replies
View Related
Dec 28, 2013
I can see the contents of the internal sdcard when using the file browser in TRWP recovery, but after a boot-up the /system/sdcard is not accessible to the Android OS. I noticed the problem after I flashed system.img and boot.img in order to get rid of Apps Ops X.
Is there an easy was to restore access for the operating system and keep the data?
Nexus 5 / 4.4.2
View 1 Replies
View Related
Sep 20, 2013
In recovery mode i flashed a rom then after flashing rom i wiped data and wiped partition.
After rebooting the rom is stuck, so now i want to get back to stock but , i have not placed stock rom on internal sd card
and my recovery mode is showing internal sd card. so i am unable to copy stock rom into my internal sd card. As my phone is unable to connect to pc. I tried odin but it did not work.
View 1 Replies
View Related
Apr 26, 2013
I have a v970 I burned it custom recovery Process succeeded but now the device does not recognize all the external memory card I tried switching off and switching and expenditure and income of the card nothing works the device simply deny the existence of a memory card Hcrrit not Rikover unidentified device itself and settings
View 1 Replies
View Related
Oct 27, 2013
I want to flash twrp custom recovery for my device samsung galaxy young s6312, stock android 4.1.2 jellybean, rooted, stock recovery. I searched but couldn't find anything.
View 3 Replies
View Related
Apr 17, 2013
I was wondering how to flash apk files. I wanted ROM Toolbox and Carbon to be my system app. I tried to download some zip files with the proper directory and meta infs. Btw, I am using Note II N7100.
View 5 Replies
View Related
Apr 21, 2014
I have an HTC one and I have been running the Insert Coin roms, but now the new roms require TWRP and I dont want to end up with a bricked phone.
View 6 Replies
View Related
May 2, 2013
I just installed TWRP and It replaces CWM on my Galaxy S3. How do I do this?
View 2 Replies
View Related
