I got into building roms from source recently for the i9100, all the ones I built so far, had no issues with the device, I built LiquidSmooth rom and it boots great and everything work but the sd cards, where I can locate the code for this in the source and why its happening?
View 1 Replies
i search the forum and every post about ROM building from source.
View 9 Replies View RelatedI have downloaded the source code for my device - Lenovo S6000-H from the lenovo website but after reading many guides cant figure out how to compile it as all the rest use git to get the source. I also dont think I need to change any enviromental variables as its the source for my model.
Using ubuntu 12.04.3 with JDK 6u35 and have the latest Android JDK/NDK I have downloaded and install all needed programs and set up all my paths in ~/.bashrc
There isnt a single make file I can use to compile the whole system or does it need to be done in individual parts? Couldnt find a lunchrc file either so unsure on how to compile it to get a flashable rom..
I really want to be a android app developer. How I can start developing apps and building apps from source.
View 1 Replies View RelatedWhere i can find the proprietary files for android phones (htc desire gsm specifically). The wiki says "find updated prop blobs" but has no reference as to where to even look.
I want to build a KANG for a device i have no physical access to, so i cannot extract the proprietary files.
First off, I have been running Ubuntu 12.04 x64 (OpenJDK) for a while now, and build regularly for Grouper and d2usc (US Cellular SGS3 variant). Grouper builds fine, flashes fine, runs great. The d2usc also builds fine, flashes fine, but I get zero radio; no bars of any color, Settings - Status reports Unknown Baseband version, same with IMEI and MEID, not even showing grey roaming bars.
This has been going on for about 1-2 weeks now. Zero build errors, the "brunch d2usc" command works great, creates a flashable zip, and the zip flashes. I have to then wipe everything in TWRP, and restore a backup (I do NOT have to do adb nv restore or anything, radio works just fine when restoring backup for Black Bean 7).
Here's what I've tried:
1. Delete entire repo, create new folder and resync. After resync, build. Flash build (again, zero errors), same result.
2. Delete entire repo again, create new folder and resync. After resync, run ./get-prebuilts AND ./extract-files.sh while running official d2usc CM10.1 nightly. Rebuild (zero errors), same result.
At this point I'm at a loss, Grouper (N7) flashes and works great (obviously wifi only version). The d2usc version works great minus the fact that I get no radio, not even roaming. I've tried the CDMA subscription thing, rebooting, and no dice still.
It is much easier for me (saves time, etc) to do my personal theming THEN building, so I'm not doing things twice (using apktool to decompile/compile).
Since my last upgrade of cynaogenmod nighties yesterday on my galaxy s2, my internal AND external sdcard are not mouting anymore
I tried to understand why and I found that my /storage folder was empty. I think it should have been populated by /init.smdk4210.rc script :
Code:
...
on early-init
export EXTERNAL_STORAGE /storage/sdcard0
export SECONDARY_STORAGE /storage/sdcard1
mkdir /storage 0775 system system[code]...
I would like to retrieve my internal sdcard content.
Basically what happens is any music on the external SD card will sometimes just disappear from my music app playlists. Most of the time it happens after unmounting/remounting the external SD. So I starting shutting off the phone every time I needed to remove the card. But it's happened at least once without unmounting the card.
I could put the music on the internal storage and not have a problem, but wanted to save that space for other things. So hoping to find a way to be able to restore the missing songs back to the playlists without having to manually remake them myself.
my phone is HTC Sensation XL CM10.1. when i switch on my phone, it stuck on CyanogenMod, i restart my phone so many time, so what i did was i format my phone from bootloader. I'm having problem with my EXTERNAL MEMORY. this is not SD CARD since HTC Sensation Xl DOES NOT have memory card slot. it's HTC Sensation XL 16GB.
my problem is everytime i enter camera and gallery, it says "No external storage available" then my whatsapp also cannot download images and videos. then when i go to storage, it shows only internal memory available, it does not shows the External one, it seems like the external memory is not inserted.
i already restart my phone so many times . then i go to recovery, then i tried to mount sd card, but it said "cant mount Sd card" then i tried to format sd card but failed since the sd card cannot be mounted.
then i try to connect my phone through USB to my computer, but i cant even read the sd card, there's no notification that my phone is connected through USB. but its connected already.
if i cant connect through USB, then how can i solve this problem? how can i flash a new rom? how to downgrade my phone since i have read from most of the forums that the only way to solve is downgrade the phone to stock. but i cant even connect it through USB to put the rom.
I want to know how I can switch the SD cards from external to internal in CM11?
I didn't find vold.fstab.
i have xperia ray and i want to swap my external sdcard with the internal memory.. Xperia ray has 300mb of internal memory and it's really low and isn't enough.. i know that there's a hack that switches the external sdcard with the internal memory.. i found a thread [URL] ..... that explains how to do that but i don't have the same line that the thread started has..this is what i have:
Code:
# Mounts the first usable partition of the specified device
dev_mount sdcard /mnt/sdcard auto /devices/platform/goldfish_mmc.0
[code]....
I'm searching for a solution to swap external sd to internal. I had to break the internal storage to make a I9003 working again.
Now, it boots the ROM from the external (but that's an other story).
Camera needs storage0 (internal storage) to work properly for DCIM. But I have only storage1 (inserted microsd). In 2.3.6 swap sd was possible by editing vold.fstab. In Kitkat the opportunity has been denied.
I search for a way to make storage1 to storage0 in CM11. Whether CyanogenMod is working on it?
I have looked through forums on the internet and saw that it is possible to swap the internal for the external sd on the gs3. I wanted to now is it possible for the lg optimus l9? i have android 4.0.4. I have used directory bind to transfer some games to sd but my internal memory is like only 1.5 so i can install big games.
View 1 Replies View RelatedSo I have this GT n7000 with android 4.0.4 ICS, rooted. I want to swap my 32 gb external sd card with my internal one. I googled it, found a method that included replacing a vold.fstab file in system/etc but that was only for jellybean. I need a method for ICS. Also I can't understand what usb storage means. Is it different form internal sd card??
View 5 Replies View RelatedHow can I install app on external sd card and not on internal storage.
View 1 Replies View RelatedAfter googling and searching alot, i didnt find my answer. So install apps on SD Card or Internal memory ?
View 9 Replies View RelatedIf possible, i would like to add 100 mb from my 16 gb external sd to the internal memory so that the total become 202+100=302 I am rooted using 2.3.6 Using XDA premium through A5
View 5 Replies View RelatedI finally upgraded to android, i got the cheapest phone possible(kyocera milano) which seems to be a mistake. The phone has only about 300mb internal storage and can barely handle its own updates(because of the limited storage). so i would like to know if its possible to make the phone "think" that some of the sd card is part of its internal memory? I found an adb driver for it(dont ask me where or which one because i had no idea and started messing with one until it worked) i have not tried rooting but can if i need to.
View 5 Replies View RelatedIgot a tasker task here to move the pics from the internal storage to the external sd card when there re new pics.
I actually saw this task on the internet by the others.
However, i dunno how to set a suitable profile to activate this task.
Taking this task as an example! When i hv new pics downloaded or saved from picspeed, i want them to be moved to a folder i created in the external sd card! How should i set the profile.
Trying to customize my new device (Runbo X6: MTK6589T, 2GB RAM, 32GB ROM, Android 4.2.1) .
1) Repartitioning
Actually, I successfully edited the partition table in EBR1 and EBR2 and the start addresses in the Scatter file and proofed it multipple times by recalculating, but after flashing, although I get a correct output in system settings and by dumping /proc/emmc, /proc/partitions and /proc/dumchar_info, when I try to push some apps, for ex., above the initial 680MB to /system/app or something similar I get a "disk is full" message. As I was able to find out only the /data and /fat partitions get physically updated by the new sizes, meanwhile the /system and /cache partitions remain physically on the initial state and get updated by the new sizes logical only. Although if after flashing I dump the system image by "cat /dev/block/mmcblk0p5 > /sdcard/system.img" I get an image with a size corresponding to the updated size of the partition.
Initial values:
EBR1
begin /system = 00 18 02 00 (real 00 02 18 00)= 137216 blocks (* 512 bytes + 1024 blocks of 512 bytes) = 70778880 bytes
size /system = 00 50 14 00 (real 00 14 50 00) = 1331200 blocks (* 512 bytes) = 681574400 bytes
begin /cache = 00 68 16 00 = 1468416 blocks = 752353280 bytes
size /cache = 00 F0 03 00 = 258048 blocks = 132120576 bytes
begin /data = 00 58 1A 00 = 1726464 blocks = 884473856 bytes
size /data = 00 00 40 00 = 4194304 blocks = 2147483648 bytes
[Code] ......
I also read somewhere that it is also necessary to edit PMT: in that case I tried to flash with original PMT, edited PMT and without PMT, but cuoldn't notice any difference.
2) Mounting the internal memory and external SDcard on system start natively as EXT4 instead of FAT32
Using my old device (Runbo X5: MTK6577) I had success on mounting the internal storage as EXT4 by disassembling recovery.img and editing /etc/recovery.fstab to change the "vfat" value to "ext4" and reformatting the storage after a successful boot with ne recovery, but on Runbo X6 I get no change to the filesystem after reformatting. By the external SDcard I never had success.
I'm having trouble changing the external memory for internal, already used the "external 2 internal", vold.ftab changed the script. with external 2 internal cards are the 2 with the same amount of bits. and using the script does not recognize the external sd.
View 1 Replies View RelatedI'm trying to add an application to the android source code in packages/apps. I have been following several tutorials and they all use the "mm" command to build their app they are adding. But I can't find the "mm" command in any of the android source code that I have downloaded and built.
-- mm: Builds all of the modules in the current directory.
Does mm have to be downloaded separately? When I build android source code, I get a folder containing lots of commands but mm is not there.
i own a Samsung Galaxy Young GT-S6310, and i'm too disperate with my internal memory... i have tryed many methods:
1. Editing Vold.Fstab file, but it's impossible because it will not show internal Mount Point.
2. Searched on Play Store and downloaded "External 2 Internal" app and i have installed it, then i have swapped memory, but internal and external shows same values...
3. Downloaded "Link2SD" app and i have created a Ext2 partition on my SD Card... but nothing (shows my memory is emulated)...
I will increase my internal memory because i must download games...
[URL].... ithis is the link to vold.fstab of my phone swap internal with external sd in my xolo q700 smartphone...
View 1 Replies View Related[URL] ... How to swap internal with external sd in my xolo q700 smartphone. I gave the link to vold.fstab of my xolo q700
View 8 Replies View RelatedThis phone of mine is in Android Gingerbread 2.3.6. The phone is already rooted but without CWM.
Here are the significant screenshots that maybe needed (Specs of the Phone, File Explorer structure and path of the SD Card, Internal Storage & SD Card capacities, and Location Path and Size of the vold.fstab):
Attached file below is the original untouched "vold.fstab" file from my MyPhone A818 Duo Slim in zip
I am using a mt6582m device with kitkat 4.4.2 with supersu. I can use root to write to system, data and cache using es file explorer, can also read and write to any sd card, but apps like titanium backup, online android backup, ram expander can't read/write to sd card.
Eg.1: ti backup read backups, can do all operation except backup and restore.
I had read a lot, changing backup path didn't worked nor any odex file is there. Using v6.1.5.6.
Eg. 2: ram expander can create swap file on sd but can read it saying 'not found'. Swap can be used with cache partition.
Eg. 3: online nandroid backup says pat not vaild.
I had tried, sd fix app, manually editing platform.xml, xposed module to 'handel external storage', change permissions using es file explorer, editing ramdisk.
There is storage/sdcard0 and 1
Also mnt/sdcard and mnt/sdcard2 (symlinked)
Also mnt/media_rw/sdcard0 and 1 (not readable even in es file explorer)
How to root my chinese tab C3100
android 4.03
Baseband version Base_w12.20.p12 MTK6577
Kernel Version 2.6.35.7
hardware version 1.1.0
I need to root it but when i go to boot menu i don't found anything except test options and i don't have a driver for it so i can't root it using any app. I always read about that trying to root it because it's internal memory 256. I want to swap it with external but I hear that i need root.
I think the standard battery is 1100mAh (1.1 amps at 3.7V for one hour), which is generally good enough for me, but there have been a few times on travel when an extended battery would have been useful. USB provides 5 (FIVE) volts to the unit, which is regulated down to charge the internal 3.7V single lithium cell. It should be trivial to build a battery pack to recharge any product that is so powered. But you cannot use external lithium because that would also be 3.7V.
I'm thinking of NiMH (nickel metal hydride), each cell of which provides 1.2VDC. Four cells in series would be 4.8V, and there are now 3000mAh (three amp!) AA cells out there, so NiMH AA cells should more than triple battery life for the Eris. Of course, you could use five such cells to get 6.0VDC, then regulate down to 5, but that would add complexity. I didn't find any posts on building such a thing, and wonder if anyone's done it.
I must have changed a setting somewhere. I used to be able to connect my SGS3 to my computer and see the files of both my internal and external SD cards. For some reason now all I can see is my external SD card. I am running a CyanogenMod 10 ROM. I have USB storage activated.
View 1 Replies View Related