i Have SE Arc S and i try to install Jelly Android 4.1.2 , i make all steps and at final Step install from SD card it;s failed ,so when i reboot mobile it hanged at Sony Errcsson Logo i try to press on Volume down or back Button nothing happened can't enter to recover mode.
View 1 Replies
how to enter Recovery Mode holding down volume up AND volume down and press power.
View 1 Replies View RelatedI have MTK6515-based china phone and can't enter fastboot mode through "adb reboot bootloader". Phone just boots normally. USB debugging enablde.
View 4 Replies View RelatedMy mom's LGC800 is stuck in LG boot screen, is there any possible way to enter fastboot mode in the LGC800? I tried the adb command "adb reboot bootloader" it reboots and gets stuck again in LG boot screen..
View 1 Replies View RelatedAOKP ICS Port Galaxy S GT-i9000 [URL] .....
I cant find usb mass storage mode (for internal card)when i connect my phone via usb to pc.The computer reads the phone though.
The only was it connect is via recovery mode buts thats difficult to do everytime.
I have a motorola motostart (xt390) and wish to unlock bootloader, root, etc. Nevertless, I just can't get into fastboot mode. Powering up with VOL Down it access the recovery mode. The same for VOL UP+DOWN. When i try powering up with VOL UP pressed the device simply don't power up.
Is it a malfunctioning device or some roms for this hardware simply have mysteriuos ways to enter fastboot?
The ROM is a brazilian retail, Gingerbread (2.3.6) version MAUI.11AMD.W11.37.SP.V9.F4.P1, build: ARGONM_W_07.15.04R_D.
I just got a brand new Samsung SGH-i727 that I cannot get into Debug mode, which means that I'm bored with it already! I want to ROOT!! I can navigate to the setting, select the check box, and it remains checked, however, it won't indicate Debugging mode ( in the status bar, with the pop-up or otherwise when connected to the PC), and I cannot access ADB to root it! I am at a loss. I have scoured the forums, deleted and re-installed the drivers, deleted and allowed the device to re-install the drivers, used different USB cables, including the original, and a decent aftermarket, used different USB ports, used different PCs, (Two Win 7's, and one WinXP, all to no avail. I am upgrading from a Cappy, that was rooted on this machine, but for some reason, the 727 just doesn't want to work!
View 3 Replies View RelatedFollowing different tutorials on how to root my device, they all begin with instructing me to enter "download mode." They all seem to say that I need to press Power+Volume Down+Home and, when the warning screen appears, press Volume Up. Well, I hold down Power+Volume Down+Home (I check a video to make extra sure I was holding down the correct buttons) and all that the device ever does is continually display the initial splash screen, the reboot again. If I let go, the device goes into "manual mode" in which it prompts to reboot, update the device or factory reset it. Am I missing something?
View 2 Replies View Relatedi press volume+ andd power button but cannot enter into cwm recovery
which enter into factory test,pcba test etc.............which mode is this?
i am not able enter flash mode in my X10i device i wanted to flash kernel.
I followed all the procedure:
1) by holding back button & plugged in USB cable.
2) my phone got recognized in the flash tool. Got a message stating "Device connected in flash mode"
3) then my device did not stay much longer in flash mode (less then 10 sec). After that it automatically booted to phone charging screen.
below is log generated in flash tool, when i tried to flash the kernel:
26/026/2013 07:26:07 - INFO - Selected kCernel-CM9-v03.ftf
26/026/2013 07:26:07 - INFO - Preparing files for flashing
26/026/2013 07:26:07 - INFO - Please connect your device into flashmode.
[Code]....
I have a Allwinner a10 based tablet, is like the Ly-F1. Y delete the /System folder, and i cant enter to the recovery mode, i need instal a rom, but i dont now how.
View 2 Replies View RelatedI have rooted Motorola Motoluxe XT389 but I cant enter in its Recovey Mode.
I tried every combination but phone just turn on in its normal way.
I'm facing with boot loop problem on my Onda Vi19 Elite. I try to reflash the Tablet but I don't know how to enter the recovery mode, so how to enter the recovery mode or to solve the boot loop problem?
View 1 Replies View RelatedSamsung galaxy s3. used odin and cf autoroot.tar. MANY PASS and sucess but no superuser and no root access. now when i try to enter recovery mode it loads right into cf auto root. unable to enter recovery.
Can still access download mode. flashed cwm recovery ( recovery.tar.md5 ) and tried clearing cache and fatory resetting.
Can't mount and open /cache/recovery/log and last_log and command. format_volume: make_extf4fs failed on /dev/block/mmcblk0p17. error mounting /sdcard/.android_secure.
I recently bought XOLO Q1000 opus. I want to Hard reset opus due to some issue with its WI-FY. But I didnt able to find a way to enter its recovery mode. I tried power +vol as well as power -vol but ended up removing battery to make phone boot.
View 4 Replies View Relatedwhy this smartphone can't enter to recovery mode nor download mode, whereas i had done correctly.
View 2 Replies View RelatedI installed flashrec-1.1.3 and recovery-RA-heroc-v1.6.2 and it says i flashed it successfully but when i try to go to recovery mode, its stays on the black htc hero screen forever until i remove the batter.
View 13 Replies View RelatedCan someone tell me how to manually enter recovery mode on samsung captivate?
View 1 Replies View RelatedI rooted my Hero using the manual rooting guide in this forum. everything seemed to go fine. Since then, I have tried ROM Manager, entering recovery mode using adb, holding down the volume button and pressing the end button, and holding down the home button and pressing the end button. They all have the same reaction, the phone will come up with the htc logo and then the screen goes blank and then the only thing I can do after that is remove the battery. Sometimes the only thing that is different is the htc logo will stay on the screen and freeze at that point, once again requiring me to remove the battery to do anything. I have tried this using three different recovery images 1.2.3, 1.5.2, and 1.6.2...all of them have the same outcome when I try to enter recovery.
View 8 Replies View RelatedI am stuck at step 8 in the manual rooting steps. When I type in the recovery boot, I don't enter into recovery mode. Instead, all I see is nothing but the white HTC, standing there unless I take the battery out and boot it back to regular OS. Do I have to hold home button and power button, immediately after I enter -recovery boot? and what button is the power button to make sure?
I know I did the first few steps of the inputing codes correctly, but how do I know I flashed my recovery image 1.6.2 correctly? When I typed into cmd: flash_image recovery recovery-RA-hero-v1.6.2.img
I immediately got that # sign below it. Do i have to wait for a minute or so before doing recovery boot? I know I pushed my recovery to my SD correctly, it says the kilobytes on the cmd screen and can find it on SD memory.
And one more thing" I typed in both these codes as written: adb push recovery-RA-hero-v1.6.2.img /sdcard and flash_image recovery recovery-RA-hero-v1.6.2.img throughout the rooting process. Does it matter if I put a "c" after "hero" in both of those codes, because when I do, I get no file and directory error. And the reason I took out the "c" was because my file was named, recovery-RA-hero-v1.6.2, originally when I downloaded it, so that is probably why I got the error of no file directory when I added a "c" after hero in those coding inputs.
just got a brand new battery and replaced on behold 2 . had to do a master recovery because it keeps rebooting. Now the software wont download to the phone.
View 9 Replies View RelatedI have a Droid Incredible that I rooted with UnRevoked3 about a week ago. I want to do a hard reset, but it just sticks at the first white "HTC Incredible" boot screen. I get the same result if I try to enter recovery mode. I can get into HBOOT ok by pressing the vol down and power button, but if I select any option it locks on the "htc Incredible" boot screen. I searched around for this problem for an hour and I've come up dry.
View 1 Replies View RelatedThe name of this post says it all... And before I updates, I unrooted, un lag faxed, un lots of other things. Now I'm trying to root my phone again through the one-click lag fix so I can get everything up and running again (I NEED barnacle to work), but I need to enter recovery mode, and no such luck... I've tried like ten times now: I hold down volume up, volume down, and the power button, but no luck... it used to work but not anymore.
View 3 Replies View RelatedI switched from my Motorola Droid to the Incredible a few days ago and the one thing I have noticed is that on the Motorola in landscape mode on the touchscreen keyboard was a send button to send the text right from that screen. Is this possible on the incredible in anyway on sense ui? Its driving me nuts to have to lower the keyboard or hit back button to send it. Any idea? I know its a minimal problem, but its annoying to me.
View 3 Replies View RelatedHere is my problems:
1. when i click "done" btn, nothing happen
2. when i click "enter", the input box only add a space instead of newline
[image: bug_1.png]
[image: bug_2.png]
I recently tried to root my HTC desire using UNrevoked 3.1. Everything was going well and I even had the desktop gui tell me that the process was "done", however the phone never made it into the green and black recovery menu, and now when I try and enter the recovery menu the phone gives a black screen. I then have to do a hard reset by taking out the battery. I have tried running unrevoked again with the same results and have tried using Rom manager to enter recovery this way, niether of which have helped.
I've spent alot of time searching without answers, if any one thinks they can help or just point me in the right direction I would be very grateful.
I am a bit new to Android Environment and i am trying to make a snooper application. that is when ever some one enter wrong password on lock screen the front camera will automatically take a picture in invisible mode. Any source code how to do that. i have completed one component that is accessing camera and taking picture with camera but the problem is now that i don't know how to access and use the lock screen wrong password event.
View 1 Replies View RelatedAre the framework-res and SystemUI apk's the only files that are involved in the boot process?
I only ask because I am currently stuck in a boot animation loop. I am able to communicate with my phone via adb during the animation loop and while in the bootloader recovery. Wiping the data and and factory resetting doesn't solve the problem.
I am thinking about pulling those two files from my wife's phone which is the same phone (Samsung Proclaim) and pushing them to mine.
I have a [Gen2] ZTE v9 Tab which had 2.2 as the stock OS which I managed to get upgraded to 2.3 using modcore everything was gr8. I pushed my luck little further and tried to install Android ICS in order to do that I did a TPT using image file and after doing that my tab is bricked.
It's not booting into the OS I tried to get into the FTM mode but that doesn't work now only thing that work's is the ADB I tried the recovery methods that can be done through ADB but it says "sh:/sbin/recovery xxxx" missing.
What I think is that the system partition was recreated and Is there any way that I can get the system files on to the tab using ADB or a way to copy entire directory on to the tab using the ADB.
Got the system to boot to FTM but when I try to flash it the software fails and gives a error "Failed to Get aprmg x x x " some thing like that if there's a way to skip this I'll be able to get my tab back to working condition.
Recently I've tried to port CWM to my device following this tutorial and it bricked... It did not boot in any mode (Recovery, Fastboot or Normal) after doing this (stuck on motorola logo/boot menu).
Managed to flash the XT920_2_290_2014 back on my device and unbrick it, but I want to install XT920_2_310_2014 back.
There are some Stock ROMs available on the internet, but these ROMs are outdated compared to my original ROM...
The ROMs available are: XT920_2_290_2014_A01_MP (Tim Brazil) and XT920_2_290_2009_A01_MP (Retail), and my original ROM was XT920_2_310_2014_A01_MP.
The backup script in this tutorial created a few files files: recovery.img, system.img, boot.img...
Is there any way to "reflash" these backups to my device?
Here is a printscreen from my original ROM:
[URL]
And a printscreen from the "new" ROM:
[URL]