something strange happened today on my tablet got cyanogem 10 installed and running on the tablet, when i go to market and installed the ebay application tablet reboot, and now will not start, I tried to format the partition / data tablet and after a few seconds Reboot....,
View 1 Replies
I installed CM using CWM onto my HTC Deluxe. I tried 4 different nightlies and the 10.2 stable and after installing any of them, I get this... it reboots into the white htc screen with a quick vibrate. Then it goes black for a second and reboots again. No CM screen or anything!
I've tried flashing it multiple times, doing factory resets, clearing cache and dalvaic cache. I am at a loss as to what to do next. with the 10.2, instead of rebooting it just gets stuck at the HTC white screen!
I went through the long process of setting up my new Evo LTE yesterday. Basically, installing and configuring a bunch of apps. Everything was looking good and working well. So the last thing that I decided to do last night was to give it a reboot. I saw it reboot (and was nice and fast) so I walked away. When I came back I noticed that it seemed to be rebooting again. So I watched it. The phone starts up and I can unlock it. I see items in the notification bar starting, I see a message right above the bottom menu bar appear stating "Content update error. Try again later.", and then about 30 seconds later the screen goes gray and then reboots. I have time to get in and look at settings and uninstall things - about 1 minute. But I really do not know where to start.
Is there a way of preventing apps from auto starting at boot? The phone is stock (no root).
I woke today to find my Galaxy Nexus in a reboot loop. I went to bed last night and it was working fine but now it just constantly rebooting. Maybe some app auto-updated over night?
I have 4.0.2 ICL53F currently loaded, updated it about two months ago.I recently loaded CWM recovery.
i just got a Samsung Captivate Galaxy S I9000, here is the problem.
1) It is locked to Rogers Wireless, because my friend tested it by inserting his Rogers SIM card into it and it works normally like a phone.
Here is where it gets interesting:
2) When i insert another foreign SIM card such as FIDO cell carrier. The phone boots into the lock screen and it says Media Scanning...and then it proceeds to the booting up screen again.
From my lack of skills in Android software, i am really stuck. But from the powers of observation, it seems the phone was flashed and is currently running a custom ROM on it from Serendipity VII.
The phone runs perfectly, without a sim card, but that's like holind a tablet without a phone line. What should i do?
Here are some details on the phone's systems.
-Firmware version 2.3.3
-Model Number:I897 ????(Why does the boot screen show I9000?,custom Rom?)
-Build number: Serendipity VII Build 2
I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet. After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good. The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop
Black screen (backlight though)
PWR+Vol up no longer gets to recovery
Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command. Tried "fastboot flash recovery cwm.img" after wait command, no luck. Is there anything else I can try?
This afternoon, while scanning the forums. I had my Incredible charging off the AC adapter. and in airplane mode for shits and giggles. After doing some research on the ATK killers. I decided to uninstall mine and just allow the phone to manage itself. After the phone was finished with the uninstall I gave it a quick reboot just to allow the core apps to come back up. and upon doing so, I found myself in an endless reboot cycle. I would get the HTC " quietly brilliant " screen, followed by two verizon wireless screens and then loop back to the HTC screen. I let it loop about 10 times before pulling the battey to stop it.
It's rather odd. After pulling the battery and disconnecting it from the charger, I let it sit for a few minutes, replaced the battery and attempted the restart again. Once again I found myself in the same loop. After 5-6 loops i was finally brought to the OS and everything loaded as normal. Anyone have opinions on what may have caused this?
1. Uninstall of ATK
2. Rebooting while on charge
3. Airplane mode + charge + reset=boom
4. Because I touch myself at night
I live in the middle east and i bought a galaxy tab p7500 3g 64gb from Amazon..as you know they come without arabic language so i need to flash the arabic firmware (ROM) and i already have all the files ready for flashing..but my question is where can i find a pit file that is compatible with the 64gb unit..because from my experience flashing the wrong pit file it will reparation the sdcard incorrectly.
i.e. once i used a 16gb pit file on my 32gb galaxy s2 my internal storge changed from 32gb to16gb and the problem didn't get solved untill.i flashed 32gb pit file into the odin..One last thing if i installed the arabic rom without using the pit file and removed the tick from repartion in odin will this method work.
My dinc just automatically rebooted and got stuck in the initial white droid incredible screen (before the green htc logo)....vibrate...black...white droid incredible screen. happened for first time two nights ago...finally got it out of this and wiped phone to factory. just today happened again. i was able to uninstal it in between the 5 minutes of working phone i had (kept going into reboot cycle....and as soon as i uninstalled it..this nonesense stopped!
View 1 Replies View RelatedI have a non-rooted EVO with all the latest updates and lately it will randomly go into a reboot loop. The only way I've been able to stop this loop is immediately put it in airplane mode, that is when it gets as far as the main screen. Usually it doesn't even get to the 4G animation before crashing again. Is there a fix for this? Or is this a hardware issue? I have not done a hard reset yet or anything.
View 7 Replies View RelatedI have seen some others having this problem, but they talk about it being a glitch associated with tower switching? But I think my endless reboot loop is due to heat. I did not have this problem until 2.2. I can just be surfing the web or running any simple app and the phone gets really hot and bam. reboot...reboot..reboot. Have to pull the battery to stop it.
After reading a few other threads, I did the factory reset nd even completely cleaned my external card. I installed all my apps again. Then I used the web browser for about 5 minutes and ..... reboot loop.
Anyone else having this problem? I guess I am just going to have to go to verizon and get a refurb, but then I might also get an SLCD huh? Am I really going to tell the difference between those two screens? Will verizon only replace my phone with another incredible? I am just sick of this reboot thing and don't know what else to do.
I was trying to update boot image, and no dice. Everything was nandroided and I re updated 0.7 BB 2.1 for cleanliness. Everything is peachy when on battery, not on USB. EVEN after cleaning cache and all that, reboot loop. I didn't nandroid this issue, I know that.
View 3 Replies View RelatedI've been rooted for quite some time to it. Not exactly an old pro, but I know my way around at this point.At any rate, I decided to give the BatteryLeft widget a try today since I went to Fab's xTheme and it didn't have a battery percentage in the notification bar. The dev recommends that you let your phone completely discharge a few times so that it can accurately predict the remaining percentage and the time until the battery dies.So I let the battery completely discharge and I connected it to my home wall charger to begin recharging. The problem I have been having is that my phone will not stay powered off and continually tries to boot up. I tried charging via car charger, USB and in the media dock and I had the same result.
The problem is that the phone won't charge long enough to stay powered on and continue to charge. The process of rebooting seems to prevent the phone from charging appropriately and uses up the small bit of the charge the battery gets for the 2-3 seconds before rebooting.I tried rebooting into CWR and letting it sit to gather enough charge to stay up, but that doesn't seem to have worked either.I'm at a loss for what to do. I can't get the phone to stay on to do anything, I can't get it to stay off to charge.
My Gnex has started to loop on boot screen and then reboot (Slimbean 4.3 update 2). I tried to wipe cache partition , to wipe dalvik cache, to flash the same rom, to flash another rom, to delete all data... but nothin happens.. it seems like the recovery (CWM) can't delete anything! if i delete or format anything , nothing happens! but the recovery told me that the process has succedeed.. I tried using Wugfresh toolkit to flash stock and also Odin.. but nothin happens.. I tried some casual commands on ADB, but i'm no good with ADB.
View 9 Replies View RelatedWhat i can do about my GALAXY TAB GT-P7500, it can not start with battery unless i plug it with usb charger and also it will tells me 100% full when i on it it will shows battery full and if i remove the power cable it will off, i have reset it many times to no avail. motherboard at a low cost? may be you have a broken one that you have decided not to repair s o that i can change the board once, or is there anything i can do to it? i dont want to loose it,
View 1 Replies View RelatedI recently just rooted my evo 3d sprint with the the boot 1.5 and everything went well. I decided i wanted to overclock my phone so i followed zeemaxs way. Before going into the overclock procedure i decided to do the the RCMIX Evo 3d kernel v. 2.2.3 first so i would have better results when done with the overclock procedure.I boot-up the kernel through the recovery mode on the phone butit failed to load so i just rebooted. After that my wifi and 4g stopped working. So i downloaded an app on the market called "flash image GUI" which lets me flash the kernels through the app. I flashed the RCMIX kernel and rebooted and now im stuck ima boot loop. I COULD just go back and back up to my old rom and settings etc but the problem is i dintmake any kind of back up or recovery i think.
View 2 Replies View Relatedhow to fix a boot loop in rom .I am portind arom for lg p690 and it is boot loop..And can i find the reason of boot loop??
View 3 Replies View RelatedHow to recover from bootloop?
My phone is a Starmobile Icon (a rebanded i-mobile IQ1.1).
It happened when i installed the Chainfire3d.
i dont have any backups yet
I was running Team Jellybeans V5 No Problem for the last little while (on my T959d)Everything worked great (minus a few glitches here and there of course)Saw the update for V6, downloaded, and flashed with CWM.
Did the wipes, (cache, dalvik and factory) did the wipes again after reboot,Now Im stuck in an infinite bootloop, (goes to samsung splash, then Devilkernel Splash, then CWM where it shows cannot mount e:/ (cycles too quick I can't see it..) then it just reboots and continues, I can't boot the phone into CWM recovery, can't boot into download mode, tried USB JIG, doesnt do anything,I can't adb my phone, can't ODIN..
Tablet hangs in Bootloop after installed cm9_nightly_20120721 + protab2xxl_compatibility_1.2.0 startet from cwm 6.0.1.0. Noticed that the "/data" partition only has 15MB of Space with 0B Byte free. I wiped the cache after installation with cwm, i am not able to boot to cwm again because key combinations not work on this device.
Got a T15A Generic tablet which has the same Hardware than protab 2 xxl, Goclever A103, Coby 1042 etc..how to get CM9 or CM10 running?
Code:
--------- beginning of /dev/log/main
I/cm ( 70): Welcome to Android 4.0.4 / CyanogenMod-9-20120721-UNOFFICIAL-907
I/cm ( 71): _
I/cm ( 72): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 73): ((_ (/'((_( ((( ((_)((_( (('((( ((`1( ((_)((_(
[code]....
randomly yesterday my phone shut off and rebooted itself. Well, it became stuck on the Samsung boot screen. So I reset it again, and again, and again. Eventually I went into recovery mode and clicked the wipe data/factory reset button. Actually, at first I clicked the wipe cache button. So I rebooted it, and now everytime it boots it goes straight to recovery mode (Volume Up, Home, Power). So i began looking for solutions and decided it would be best to restore to a stock Rom. Well I downloaded one, and attempted to look for it in the internal SD card but all it said was "unable to mount sd". Did some more research, and found something called odin. I went into download mode and odin was able to recognize my device. Loaded up my stock rom (pda, .md5) and it would say this:
Quote:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user _low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
[code].....
Not entirely sure why it stopped at recovery.img. I installed the Samsung Drivers from the website and still nothing. Uninstalled odin and went to an older one, still same message. Installed a newer one, still same message.
I spoofed my device S6312 to galaxy nexus using network spoofer to download an incompatible game from google play store.According to network spoofer everything worked great but nothing actually happened and that game was still incompatible on play store.So I launched network spoofer and told it to recover my device again to S6102.It said that the device will reboot so I gave it permissions and my device started rebooting but it stop at the Samsung logo and was doing the same thing again and again so s actually boot looping. How to recover my device and any way to do it without a computer.
View 1 Replies View RelatedMy galaxy s3 is rooted and cwm installed.I have changed a default dpi and rebooted to find my self in constant boot loop.I'm at the brink of flashing my rom to a custom one to see if it works but very scared to do so especially not knowing much about it.I have performed hard reset by going into recovery mode but it didn't work.
View 9 Replies View RelatedToday I tried downloading multiple roms onto my HTC incredible 2. But each Rom I installed either looped on the HTC screen or wouldn't install. I tried Cm 10.0 , 10.1 and 7.2. Also I tried paranoid Rom and that also looped. Only roms that worked were the stock roms I downloaded. But only the stripped version of one stock Rom. When I tried the unstripped version which included rooted apps and tweaks the Rom worked fine with one exeption; the WiFi bugged out, constantly turns itself on and off and didn't recognize my WiFi. I rooted my incredible 2 through a website that had a full tutorial that made me unlock my phone through a key and using the command propmt to flash my phone. I'm not sure what I'm doing wrong. I clear everything including cache and davsik or whatever its called before I install the roms. I use the clockworkmod booter thing (holding power and volume down button). I clear everything then install from SD card. I just want jellybean 4.2.3 or anything above 2.3.4.
View 1 Replies View RelatedI have an Android tablet (Diablotek D2-721, very cheap I know, but it serves its purpose) that is stuck in a boot loop. The real problem here is that this device apparently does not have any sort of recovery mode and being in a boot loop means it does not get recognized by ADB or any firmware flashing software.
I researched all day yesterday perusing forum after forum but almost every single solution requires booting into recovery.
I've never tried to hack my phone or do anything like that. I Simply wanted to restart my phone and it got stuck in a boot loop! Will i have to call sprint. I Dont want to do a factory reset.
View 1 Replies View RelatedSo i flashed my evo 3d to boost and now in a boot loop??? ive tried installing ruu's but nothing seems to work.
View 2 Replies View Relatedmy Sensation is stuck in boot loop every time i try to reboot it.
Unlocked
Pyramid PVT SHIP S-On RL
Hboot-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34
I had been flashing roms with 4ext recovery since you can just use smartflash but after the last time I flashed a rom the rom wouldn't load and just kept rebooting the phone the the htc screen over and over again
i m using sony ericsson xperia arc s i have rooted my phone few days ago everything was ok i have root through flashtool method and i think 587 kenel was used. i dont know about roms kernel n etc etc i have read the thread and root my phone last night i tried to install font changer i granted superuser request and phone is restarting and then stuck on bootloop first it shows sony screen and then xperia screen and again restart and this process go on what should i do
View 4 Replies View Related caused & am now stuck in a recovery boot loop.
- bought a Thomson QM734-8G tablet (Allwinner A13b clone), running Jellybean 4.2.2;
- PC interface worked fine in MTP and large storage modes;
- setup Android SDK & Java JDK on PC and communicate with tablet via ADB;
All OK so far..After a couple of days, I decided to replace stock recovery with ClockworkMod Recovery, so I could start messing about with the tablet.
I found the CWM 6.0.2.8 mod supposed to work with these tablets and, following instructions, determined it was indeed running on sun5i hardware and had 10 partitions (nandj) and downloaded the appropriate version.
I used ADB sideload to install CWM and everything appeared to work OK ... until I rebooted and found myself stuck in a never-ending cycle of CWM-based recovery bootloop.All I get is the CWM recovery console, with a few lines of error & the tablet will go no further.
E:can't mount /cache/recovery/command
E:cant mount /cache/recovery/log
E:cant open /cache/recovery/log
E:cant mount /cache/recovery/last_log
E:cant open /cache/recovery/last_log
CWM functions work properly and nothing will mount through the 'Mounts and Storage' section, although sideload mode still seems to work.Attempts to use ADB sideload to install a different CWM or other recovery image have all failed, and LiveSuit and PhoenixSuit both have issues detecting the tablet (despite trying various versions of each & following instructions precisely), so I can't flash a replacement ROM to fix things.
At the moment, I just want to rip CWM out and go back to factory recovery mode and have a working tablet again! I think the Bootloader is locked and the tablet is unrooted. Superuser or SuperSU don't want to install properly. However, using ADB, it looks like I can get root access in shell (#).