Ihave a Question to the standard Android VPN Client because i cant test it:
- If i connect my VPN after i started my Smartphone,- what happens when my mobile Data Connection lost? Do Android perform an auto reconnect to the VPN when the data connection is restored?
View 1 Replies
I have done many of reverse engineering for other electronics in the past, Since Im new to android I was wondering before even wasting my time if is possible to port, or built a rom from sources or a phone thatis NOT External SD built in to a phone that it have the external sd built in.
Making it short can I try to reverse engineer the android code from a Nexus 5 (no ext_sd) to other device that have ext_sd built in?
If is possible where should I be looking to start trying making some development on this as I haven't done nothing close quite.
Does Android use a built-in EQ or limiter on their Bluetooth stack? I am running into a situation where both of my android phones, One X and Nexus One, have developed a "clipping" noise when I listen to music through the Bluetooth in my car. This same clipping doesn't happen when I listen to podcasts, only music. My assumption is that something in the framework is clipping the audio saying that it is too loud and causing this to happen.
I have also used the same Bluetooth setup my WP7 phone, an HTC Titan, and I do not hear this same noise at all. I have only heard this through my android phones which leaves me to believe that it is something based in OS level and not the Bluetooth set up itself.
Which music players use phones eq not their own?
View 5 Replies View RelatedJust wondering what would be better/more accurate for a data usage counter...
View 6 Replies View RelatedI have created an HTML5 'app' with a width and height 480 x 800 to be used as an android app.
Plan is that this can be scaled down/up for other Android devices to fit screen.
The app runs fine, but it is not being scaled to my device screen size. I have to scroll up/down and left/right on the every screen.
I have tried nearly every variation of the meta viewport tag with no succes (in the index.html file).
I have installed Eclipse. Hello world app working fine. My question is how I can use built-in camera in my application? I already gave permission. Where should I write code etc and what? My knowledge about programming is also very poor.
View 1 Replies View RelatedIs there a way to block or remove built in applications on an android phone. I want to limit what you can do on the phone e.g. only call, text, email and use one or two third party applications. Is it possible to do that without rooting the phone?
Looking to do this on a Samsung Galaxy Pocket.
How do I replace builtin apps with the latest versions as they are eating up the internal storage...
As google play, Maps, voice search, Gmail, Google search...
These apps take a lot of memory space ... So i am looking for a solution so that the outdated apps of factory versions can be totally removed and replaced with updated versions...
i'm using Galaxy Fame and he have built in FM transmitter. Do i need an app to listen music in my car, or there is an option in music player to "activate" that transmitter? I was searching for that, but no results.
View 4 Replies View RelatedI'm trying to make a custom kernel for the Samsung Gravity SMART using sources from the unofficial CM9 port for the Gio/Ace (which both use very similar hardware to the Gravity Smart). What I've succeeded at so far:
1) Acquiring the source, both for the CM9 kernel and for the stock Froyo kernel
2) Searching for the device-dependent references in the stock kernel
3) Porting those changes over to the CM9 kernel
4) Getting everything to actually compile
5) Acquiring the stock CM7.2 source
6) Creating device makefiles (i.e. BoardConfig.mk, etc)
7) Building CM7.2 using kernel built in step #4
8) Putting the various img files into an Odin-compatible .tar.md5
9) Actually flashing to the phone.
And for all that work, I got.. a soft-bricked phone (fortunately, I have an Odin file for stock firmware). The phone boots to a SAMSUNG logo (not flashing/throbbing). how the heck do I figure out what's actually failing? Is there a bootloader to unlock, and if so how do I unlock it?
I installed Timeriffic & it's effective at silencing notifications at night. Unfortunately, my alarm didn't go off this morning. Alternatively, is there another way to silence emails at night & still be able to use the built in alarm (razr).
View 3 Replies View RelatedHow to disable the baked-in power saver feature in some Samsung Android phones? the one that dims the screen, turns off the keyboard backlight, and doesn't let you use the camera once you hit 15%(or 10%) battery left? can't stand that, for my own needs anyway!
i figure it might be an edit to the kernel source code, or something like that. i just don't know where to do that. I know it can be done tho, because i remember having some ROMs on the Epic 4G that had that junk disabled. guess i'll also see if some of those old devs. are still around.
Trying to get CM10 built for the Samsung Galaxy Reverb. It's building just fine, but no matter what we try it WILL NOT BOOT. We get a black (backlit) screen after the Samsung logo and nothing more.
I've tried flashing the stock boot.img over the rom, building and flashing the stock kernel seperately (that boots the stock rom just fine when flashed but won't boot CM10), and tried modding the ramdisk to boot, but nothing is working.
I've looked at other MSM7x30 devices to find if I'm missing anything, but I can't find anything that I don't have in the device folder.
Here's the device repo: [URL] ......
I am looking for a way to make a homescreen shortcut to start the ics built in recent apps dialog.
How to start it via activity or intent?
I am using cm9 on a galaxy s2 with apex launcher
My Samsung Galaxy Reverb has nobody willing to build CM10 for it, so I decided to take on the task. It built without error - processed the kernel and all the CyanogenMod 10 files just fine and generated the .zip. However, after flashing the .zip I end up with a Samsung logo, then a black screen.
The compile went through without error, so I'm a little lost as to what I should check next. From doing a little searching it seems the kernel is at fault, but what to do about that. Am I supposed to flash the kernel separate from the .zip that the CM builder outputs?
I did some changes in my phone's ROM via Dsixda's kitchen.
I want to include the CWM recovery in the ROM.
I have the .img file for the CWMR.
How do I add the recovery in the ROM, so I dont have to install it separately everytime?
Also what are the changes that have to be made in the 'updater script'?
I have Samsung Galaxy Young Duos S6312. Stock, rooted, deodexed ROM. 4.1.2 JB
Is there any way to install new version of busybox if using modded rom with built-in busybox?
Cause I have 1.15.3 and not all features of zep's supercharger script will work with this version... X8
We are plannig to write a new music application from scratch. Also we want to uninstall the built-in music application to ensure only our application resides on the phone. adb ls /data/app command doesn't list built-in applications. So, I am unable to uninstall the built in music application without knowing its name. So, I am getting a feeling like built in applications uninstallation is handled in different way.
View 15 Replies View RelatedI have to built a resident application, but I have no idea to do that If you know how to do, please do me a favor and teaching me.
View 3 Replies View RelatedIn this linked image , I see the button on the right quite often in a lot of apps. On my Moto Droid, it is used extensively in the settings app. It is also used as the default AlertDialog icon. Can I use this via a android.r.drawable?
View 2 Replies View RelatedI've been trying to build SDK in cygwin from Android 2.2-r1.1 source code, and now I am facing some problems as below:
1. The adb couldn't be built successfully, it seems it couldn't find the header files in /usr/include/w32api/ddk 2. The fastboot also couln't be built 3. After disable adb and fastboot from make_windows_sdk.sh, I counld get the sdk zip file 4. When using this sdk in Eclipse, I got an error "W/ResourceType( 2888): Unable to get buffer of resource asset file" which is related to resource.arsc in android.jar, after replacing that file, the sdk is find in Eclipse (also need to copy adb from downloaded sdk)
Anyone has tried to build sdk in cygwin as well? Would you pls share the methods to fix the problems above?
Has anyone built OpenAL for the Android, or found the shared library for it on the system? This seems like an obvious need for a game of any kind, yet there's no resources out there for it. It seems the Android java sound library can't do pitch changes from what I can tell, so there seems a need for OpenAL. I know OpenAL Soft can be built on top of ALSA, but I'm not sure if anyones done that, and I'm sure it would take me a month.
If there's a good guide somewhere on sound manipulation on the Android without OpenAL, that's fine too. It's just that OpenAL is sort of a standard for game makers and it would be nice to port my thousands of lines over to this system, which I sort of thought was the point of the NDK before I dugg into it and saw that there's almost no shared library access on the system.I hope I can actually port without becoming a java expert myself. Really disliking the NDK so far!
I want to be able to open a pdf file in my app using the android's built in pdf viewer app, but i dont know how to start other apps. I'm sure i have to call start activity, i just dont know how to identify the app im opening and how to pass the file to that specific app.I just learned that the pdf viewer i have on my phone is actually made by HTC and that Adobe just barely released their android pdf viewer (which is great). So the new question is this: how do i verify that the user has installed adobe's viewer, and then how do i open the file in that app from my app?
View 3 Replies View RelatedThe built-in IM app is always running in the background. It starts over right after I kill it.Short of changing to a different OS, is there anyway to disable or delete this application?
View 6 Replies View RelatedIs there anyone out there that could send me the source for the built in SMS client? Since we can not intercept outgoing SMS i need to write my own copy of the SMS client to do be able to capture SMS replies.The problem is i am having a lot of trouble trying to find a way to access the SMS client source on windows. If anyone can send me or give me a link to a file containing the source I would be very greatful.
View 2 Replies View RelatedI'm coming from BlackBerry to Android and two favorite apps were Viigo and FreeRange with their built-in full article reading support. Is anything available for Android with similar functionality. Opening up a browser to read full articles is so clunky. I'd be willing to pay for one. I've tried some of the existing free Android offerings, but they all open full versions in a browser.
View 7 Replies View RelatedI'm just using the build in email app for my hotmail, gmail, work mail etc. However It keeps bringing up old messages that I leave in my inbox. How can I get it to not keep displaying these? Or better yet is there a killer app out there that does email/contacts better? I hate having to use the whole gmail thing.
View 3 Replies View RelatedIs the FM radio on the HTC Legend built in or is it a new feature in 2.1?
View 1 Replies View RelatedI want to develop an application for the android platform that can download some files from my server.
How can i use android's download manager like it is used in the Android market app? I mean, the one when the user downloads something, a download status is shown in the notification bar.