General :: Android 4.2.1 / Dialer Not Working Properly
Jan 28, 2014
I am using XOLO Q3000, having Jelly Bean (4.2.1) on it. My Dialer is not working as it use to be in my XOLO Q800 (Jelly Bean 4.1). Dialer have following issues:Dialer doesn't show alphabetic keypad i.e. can't swipe to qwerty keypad Dialer doesn't act smartly i.e. when we type in the numbers it doesn't bring the relevant matches If saved number is come in different format then dialer doesn't show contact details.
e.g. - Suppose I have saved ABCD contact with 1234567890 number. If incoming number come as an 01234567890 then respective contact name is not shown on dialer screen. Same issue persist while dialing the number.
View 3 Replies
Jul 22, 2010
I had to call in to the automated system and enter my jury ID number and pin. The ID number is 9 digits and the pin is 4 digits. When punching these numbers in using the stock dialer, the system I was calling kept messing up. It didn't prompt me like it should, and when it read my entries back to me, they were wrong. The system would report that I'd entered 88 when I'd entered 80 or something. I tried this 3 or so times before I started to think my phone was the problem. I called back with another phone and it worked fine (it was some old Motorola phone but I've actually interacted with this system using my iPhone 3G in the past just fine). I called the system back with my X and, this time, punched in the numbers slowly (half a second or so between key presses). This time, everything went swimmingly. I haven't replicated this on other automated systems, but it's clear at least one of them has a problem with the X's stock dialer when it's used quickly. Anyone have a similar problem?
View 1 Replies
View Related
Aug 8, 2013
i hvae a custom rom based on ics 4.0.3 sense 3.6 installed on my HTC EVO 3D..Haxsync synced my facebook contacts properly, but i have a problem. whenever i try to crop a picture, i get an error"Unfortunately, Haxsync has stopped".Also i noticed that it doesnt update the new profile pictures.
View 1 Replies
View Related
May 14, 2013
I have a Samsung Galaxy S2 and recently bought a no-name 64 GB SDXC card to replace my 32 GB, but I can't get it working properly.
I can transfer files to the card both via a micro SD adapter and the USB contact plugged to the computer. The SGS2 detects it, but the folders and files in them are corrupted by the phone. After some GBs, all folders are empty and folder names format like this:
"Dave Gahan" > "AVEGA~1" (spaces in original folder name)
"Depeche Mode" > "EPECH~1" (spaces in original folder name)
"Delerium" > "ELERIUM"[code].....
Here's a screenshot from X-plore:
If I put the SDXC back in the computer, the folders are like in the phone (corrupted).I've never had this issue with the 32 GB card and right now it's working perfectly having the exact same files as the 64 GB on it.I'm running stock ROM with Speedmod kernel 4.1.2. The 64 GB is formatted to FAT32 with 32 kb cluster size and there are no files over 4 GB.
Is there a way to solve this or is my 64 GB SDXC broken?
View 3 Replies
View Related
Sep 11, 2012
My phone's video isn't working properly, no matter which player I use. It was working fine, and at first, asking which player I would like to use for the playback. That has since stopped. The video seems to take longer to load and will play for around ten seconds, then stop for a while, then play for another few seconds.Should I do a default reset?
View 1 Replies
View Related
Feb 22, 2014
I have a problem with google+ Android app, recently, today I stop from receiving notifications on my phone not even on the status bar and I have the config for example this community to receive notifications. The only way I could recieve them and others I've configured is to enter the app and the other strange thing is that I doesn't even sound while I have configured that too. I've reinstalled and installed the app, wipe cache and dalvik, wipe the app data and config again with no results, it's too rare. y Google App version is 4.2.4.58179886 and i have activated the sync of Google+ on the account. For further information i receive notifications with sound for people who circle me and mention me but not communities or circles i have.
P.S.: For Google+ web notifications are working as they do. I have a Samsung Galaxy S2 with Jelly Bean 4.1.2. Don't know if it has to be with other Google services like Google Play Services, Google Framework or other.
View 2 Replies
View Related
Feb 20, 2014
i got a brand new S3 In december 2013 , i dropped it an it broke ( both touch and LCD ) I got them replaced by a authorized service . It worked fine 2 months , Two days ago some problem appeared, Touch screen stopped working propperly , it worked only for short periods of time. Now if i press really hard on the right hand corner (Above the return arrow) it works Perfectly ( as long as i keep my finger there) but sometimes it works fine after reboot but in the end it stops (No signs of cracks or damage) , i had CM11. What i've done until now :
-Deleted CM11 and added 4.1.2
-Took it appart and checked the ribbon ( fine)
-Hard reset
- Dummy file generator
Everything works on it buttons ,Before the freezing screen flashes a bit .
View 3 Replies
View Related
Jun 13, 2013
Up until last week, I was using my original samsung earphones and some Philips earphones in my phone to listen to music without a problem in nearly 18 months.
Then I bought some Adidas Sennheiser earphones and plugged them in and now I can't hear the vocals and the music sounds tinny. I then put my samsung ones back in and same problem, even though they were working perfectly fine up until last week. Now any headphones I put in are not working properly but they work in other peoples phones and in my pc. I don't want to have to get a new phone. There must be a reason why they worked one day then as soon as put in the Adidas ones something changed. I have checked all the settings on the phone, have looked at heaps of blogs on the net and here, tried the WD40 on a cotton tip, tried cleaning out the headphone jack, tried pushing the headphones in all the way, tried turning off, taking out battery, turning off and on while headphones were in.
View 2 Replies
View Related
Aug 30, 2013
I bought LG VU II (F200L) in perfectly working condition, it almost new. After installing LG PC suite and connecting it said new firmware update is available so I proceeded which was done successfully but since then touch screen is not working properly.
Usually it responds ok but main issue is back button is not working anymore, and sometimes when I press power button to unlock screen it responds very weird and not so responsive as well as sometimes doesnt responds or opens apps that I havent even clicked.
I tried to restore, emergency restore, LG Flash tools and used correct KDZ files to flash roms successfully but nothing seems to resolve this issue.
View 2 Replies
View Related
Feb 20, 2013
Dialer codes are not working on the Verizon Note 2? I tried em all and none of them work. I am trying to find a way to disable 4G so I can conserve battery, like I was able to on my Bionic, but I am unable to.
View 1 Replies
View Related
May 31, 2012
My mom bought a $200 tablet from some no name company named linsay. It's model is a Cosmos F-10HD. It's an all right little tablet but it comes without the play store. When I try simply installing the play store apk it works for a while until i try to actually get an app but then it crashes and i can no longer open the store. I think this may be due to read write permissions but I don't think I can modify those without root access. So is there some way to get the play store working properly on this tablet without root access? And if not is there some way I can root this device and then install it?
View 9 Replies
View Related
Aug 1, 2009
My little apps used to run fine in eclipse and on the android emulator.Then for some reason they stopped working. Now, no new apps or changes will appear on the phone.I have followed the instructions on the FAQ but it doesn't change. Now also if I want to change some code and then re-run it by pressing play, it says: emulator: ERROR: the user data image is used by another emulator.
View 2 Replies
View Related
May 8, 2010
Started on the missus iphone that it stopped sayiing 'Welcome to CoPilot' when you started the app (even though it is switched to on in the settings), also none of the directions are audible yet the button clicks are fine. Sent a support request to ALK a week ago... no reply. Today fired up CoPilot on my HTC Desire and exactly the same thing has happened throughly pissed off.?
View 2 Replies
View Related
Mar 8, 2010
I have worked on android 1.5 and 2.0.
Currently i am doing Migration of Applications available in 1.5 to android 2.0.
During the work time i have come up with one issue as follow:
The DateFormat of android is not returning the value in CAPITAL Letters for AM/PM in 2.0 where as in 1.5 it is doing absolutely fine.
Example :::
CODE:.................
View 2 Replies
View Related
Aug 20, 2010
I looked all over the web and in this group for a solution but I don't seem to have any luck. I'm probably not the only developer that needs to try C2DM on the emulator so a solution to this could be quite useful. First of all let me say that I'm running the latest Google APIs 8 rev 2 as AVD which should have all the necessary magic to allow me to run C2DM (it even has all the market components to run the LVL). I tried both Chrome to Phone and Jumpnote and it was impossible to make the C2DM service work. - Chrome to Phone fails when trying to connect from the Android app running on the emulator with a "Error: Unable to connect". On the Chrome to Phone site they recommend that Talk should be tried first and that the Market should be available (none of these come in the emulator image and I'm not sure if I should even try to install them on the emulator). - Jumpnote does not synchronize automatically and gives me an error: "Error calling remote note sync RPC" (when I do a manual sync I can see the docs being synchronized but looks like C2DM, which enables the auto sync, is broken). I also heard a comment that maybe port forwarding via adb could be necessary (but I'm really not sure this makes any sense).
View 5 Replies
View Related
Dec 2, 2009
I'm trying to develop a touch control, but I'm getting some problems with the onTouch method. Basically, only the event ACTION_DOWN is working. The others seems to be in trouble.My application has a LinearLayout, containing a VideoView.I have a HTC Magic updated to 1.6.
View 3 Replies
View Related
Nov 13, 2009
I downloaded Mobilo for a few songs then downloaded Ringdroid to assign them to a few contacts. My problem is when the phone rings the new ringtones sound like they are skipping and scratchy as it rings. Why would it do this?.
View 4 Replies
View Related
Feb 24, 2010
In my Application the camera preview is working properly in both in portrait and in landscape mode. No crashes are occurring, but the users are complaining that the crashes are occurring when they are using the same.
View 1 Replies
View Related
Nov 19, 2010
I am using the showDialog and dismissDialog methods to show progress dialogs in my app. Moved from creating the dialog and calling show() on it to using this in order to save state when changing orientation.But when I change the orientation from portrait->landscape->portrait, the dismissDialog no longer dismisses the dialog. The dialog stay there all the time and I need to press the back button for it to disappear.
View 2 Replies
View Related
Nov 17, 2010
I developed a mobile website using jqtouch. It works fine in iPhone but doesnt work in android.
First the page loads properly in android but when we scroll then it doesnt display anything on the screen. But I am able to click on links and it navigates properly. So am assuming that there is text on the screen but its not getting displayed.
I did look at issues posted in google code where they said that its the problem with transparent gif and suggested to use base64 value. I tried that, even then its not working.
View 1 Replies
View Related
Apr 24, 2010
I'm writing an app for Android OS, and I need to store some time values in the SQLite DB. I have been using android.text.format.Time to store the time values in the app, and then inserting the values as millis into the DB as REAL values. On the SDK emulator, everything works perfectly. On the sole phone I've had the opportunity to test my app (so far), my duration code doesn't work as expected. Some relevant code:
private static final String DATABASE_CREATE =
"create table " + DATABASE_TABLE + " ("
+ KEY_ROWID + " integer primary key autoincrement, "
+ KEY_START + " REAL, "
+ KEY_STOP + " REAL, "
+ KEY_DUR + " REAL );";
private SQLiteDatabase mDb;
ContentValues timerValues = new ContentValues();
timerValues.put(KEY_START, stime.toMillis(false));
timerValues.put(KEY_STOP, etime.toMillis(false));
timerValues.put(KEY_DURATION, stime.toMillis(false)-etime.toMillis(false));
int result = mDb.insert(DATABASE_TABLE, null, timerValues);
I pull this data from two separate functions with slightly different bits of code, both using Time.set(long millis), both giving incorrect results: The start and stop values come back correct, but the duration comes out 17 hours too large. Am I missing something about calculating durations or does this just seem like there's something "special" about this particular droid? I'll have another droid to test on Monday, but any ideas are appreciated.
View 3 Replies
View Related
Aug 10, 2010
I have added the webview within scrollview in the layout. So data in webview is not fully displayed. Only in android sdk1.6 WVGA resolution, It is not working properly.
This bug is filed in android bug tracker also. For your reference, http://groups.google.com/group/android-developers/browse_thread/thread/d66d908993d51d65
Can anyone knows how to solve this very big high priority issue.
View 1 Replies
View Related
Jul 8, 2009
I have a widget , thats working just fine in a particular orientation, but the moment i change the orientation to landscape/portrait, the widget is not able to launch. I have one layout and one layout-land folder in res directory.The problem is that the widget created in landscape mode is not opening in portrait mode and vice-versa.
View 4 Replies
View Related
Jan 16, 2010
I'm creating a webapp for Android mobile phones with ASP.NET and the Ajax Control Toolkit. I've included a CalendarExtender-Control which popups a calendar when focusing the associated Textbox-Control. If I select this textbox on my mobile phone, the Android webbrowser highlights it with an orange border. The problem is that this border is shown in front of my Calendar popup. Has anybody any idea how to fix this issue?
View 1 Replies
View Related
Sep 2, 2010
I am developing an Android application and I access a RESTfull web service that returns a JSON. This JSON I want to put it in POJOs but I think I am missing something as it doesn't work.
The JSON retuned is as follow:
CODE:.....
This is returned in response variable
CODE:.............
And now I try the following:
CODE:................
The error I get is:
CODE:.................
Here are the POJO objects
CODE:.......
To access the web service I use the class from: http://lukencode.com/2010/04/27/calling-web-services-in-android-using-httpclient/
Can't figure out how to continue. I found some subjects here but still didn't found a way around.
View 1 Replies
View Related
May 21, 2010
Data there are inconsistent!. On dashboard I have TWO new bugs. Going down I see one NEW and one OLD. When I click on NEW link I see one OLD only. When I go down I see bug marked as OLD. More info for Android Market developers: application: net.hubalek.android.worldclock, Exception class java.lang.NullPointerException Source method WorldClockWidget.onReceive()
View 2 Replies
View Related
Sep 1, 2010
So, the moral of the story is "Don't use the native calculator to do your taxes". Open the standard calculator, and enter 49990-49602.62 (a simple subtraction problem) Then push the = sign. Handy-Calc (excellent App) does not do this.
View 3 Replies
View Related
Nov 9, 2010
I have a layout with a ListView that contains EditText objects that can requestFocus() when the user chooses to edit the list item. I make sure to call setSelection() on the ListView when this happens, and then have the EditText request focus and then use InputMethodManager.showSoftInput to show the soft keyboard. However, when this happens, the list view is being resized correctly, but the selected list item remains below the fold and the user has to scroll up. This is working properly on 2.2, but is failing on 2.1. Any ideas for making sure the list selection remains visible?
View 2 Replies
View Related
Dec 26, 2009
Can you please advise if development tools Eclipse, Android sdk, usb driver etc. are working properly under Windows 7 32 and 64 bit?
View 10 Replies
View Related
Jul 21, 2010
It seems as though my droid x has a hard time with the wi-fi connection. I turn it on and the wi-fi signal comes up but i am getting horrible speeds. my ping is anywhere from 300 to 900 (Horrible) and then my download speed is 1400kbps or so. and the upload is around 1500 kbps or so. I have tried atleast a dozen tests. The speeds almost seem like 3g speeds. is it becuase the 3g isnt being turned off when the wifi is on and that is what i really am testing? please any advice would be great, i really like this phone but if my internet connection is going to be like this I don't think i can handle it.
View 18 Replies
View Related
