Android :: Draw Shape Within Shape Or Draw 2 Lines Around Shape

Jun 21, 2010

I want to have a elmenent with a 2 color border outline. I can do a single color outline using the element, but this only allows me to draw a single line. I tried using 2 elements within my but that didnt work either. Is there a way to either draw a shape within a shape or draw 2 lines around my shape (which has rounded corners btw).

Android :: draw shape within shape or draw 2 lines around shape

Android :: DrawBitmapMesh - Draw A Bitmap Transformed To Fit Shape

Jul 2, 2010

I want to draw a bitmap into a shape (in this case an isosceles trapezoid); not clipped, but with the bitmap transformed to fit the shape. For example, if the height of the left side is greater than that of the right side then I want the bitmap evenly transformed in height from left to right to match the height difference. The only method I can find to do this is drawBitmapMesh, however this produces some strange results. I have searched extensively and can find no concrete information on drawBitmapMesh.

To demonstrate the example, I have a bitmap which contains an even grid of vertical and horizontal lines. I use bitmap mesh with the code shown below. However, the horizontal lines of the grid do not evenly merge downwards from the top and upwards from the bottom towards the target. Rather, horizontal lines to the left of the line dissecting the top-left to bottom-right diagonal of the shape slant downwards to the left, lines to the right of the same diagonal slant downwards to the right. I also note that that the top line of the bitmap increases slightly in height from left before descending again to the right.

Perhaps drawBitmapMesh is not the method I should be using, or perhaps I am using it incorrectly.


View 2 Replies View Related

Android : Can I Use Layer-list - Shape Elements To Draw A Horizontal Rule

Nov 10, 2010

I want to set the background of a Relative or LinearLayout to a custom drawable. I want the shape to draw two horizontal lines across the bottom, leaving the central part transparent (empty). The following draws the horizontal lines centered vertically, where as i need them to be aligned to the bottom of the shape. (If you add a rectangle as an item you can see the shape expands to the dimenstions of the parent, but the lines are still centrally aligned). Code...

View 1 Replies View Related

Android :: Draw Shape Or Bitmap Into Another Bitmap - Java - Android

Jun 22, 2010

I want to draw a shape(many circles particularly) into a Specific Bitmap. I have never used canvas / 2D graphs etc. As i see it i create a Drawable put the bitmap in it then "canvas-it" to the shapes i want etc.

View 1 Replies View Related

Android :: Shape Writer For DInc

Jun 2, 2010

Just downloaded Shapewriter for My DInc. And it is awesome. All those waiting for Swype should give this a try because its pretty Incredible.

View 7 Replies View Related

Android :: Shape Writer Keyboard

Oct 12, 2010

Anyone know where I can find this? I had it on my phone awhile ago but had to wipe and could not find it again in the market. IMO it was a tad bit better then Swype. Both great keyboards, I just liked that one better. If anyone could provide any info that would be great. Thank you.

View 2 Replies View Related

Android :: Shape With Different Stroke And Fill

Sep 15, 2010

How can I draw a shape (e.g. circle, rectange) that has different stroke and fill colors? Eg. A circle with green perimeter, but black inner fill.

View 3 Replies View Related

Android :: Docs For Shape Xml Syntax

Jan 27, 2010

Where is there information about the syntax of <shape> xml files. These can be used to define 2D graphics as I understand it. There are few spotty examples in the samples directory but that is all I have found.

View 7 Replies View Related

Android :: Triangle Shape In XML File

Oct 20, 2010

Is there any way of defining a triangle in a shape item though a XML definition? It seems there is only rectangle, oval, line and ring. Why not a triangle?

View 4 Replies View Related

Android :: SetBackgroundColor Changes Button Shape

Aug 22, 2010

I have a button on my app that I want to change the color of during different states of my application. However when I call btn.setBackgroundColor(Color.GREEN); the shape of the button changes. The rounded edges go away and I get a flat looking rectangle that is green. Is there a reason the shape is changing? Is there a a way to change the button color without the shape changing?

View 4 Replies View Related

Android :: Shape With Open Border

Oct 19, 2009

I would like to have a shape that has border only on 3 sides: top, left and right, i.e. I want bottom to be open. How can I achieve that defining shape in XML? Currently I have a normal 4 side border using the following shape XML definition:

<?xml version="1.0" encoding="utf-8"?> <shape xmlns:android="" android:layout_width="fill_parent" android:layout_height="fill_parent" >
<solid android:color="#FFE8F0F8" />
<stroke android:width="1dp" android:color="#808480" />
<padding android:left="1dp" android:top="1dp" android:right="1dp" android:bottom="1dp" /> </shape>

View 5 Replies View Related

Android :: Shape Drawable As Background Xml?

Aug 14, 2009

I really appreciate if someone can help me with using how to use shape drawable as my background xml for my view. This is what I tried: But I never get the color. Android always gives me black text on white background, regardless what color attribute I put.

<?xml version="1.0" encoding="utf-8"?>
<shape xmlns:android=""
<stroke android:width="1dip" android:color="#FBBB" />
<solid android:color="#6000"/>

View 1 Replies View Related

Android :: Shape Glass Effect

Aug 11, 2010

I've created a custom toolbar using a gradient inside a shape. It looks very nice, but since we only have the option for 3 colors (startColor, centerColor, endColor) it looks very round. I would like to do a glass effect, which requires a sharp change in color in the middle. Basically I need 4 colors (startColor, justabovecenterColor, justbelowcenterColor, endColor). Now I could have two shapes sitting on top of each other to get this effect, but I don't want to do this. I'm getting into some tricky UI customization here and that would be very difficult to manage on different sized screens.

View 1 Replies View Related

Android :: Offset Shape Within ShapeDrawable

Sep 9, 2010

I'm trying to draw a rounded rectangle with a border around it using a class that extends ShapeDrawable (see here) and everything is working except that the shapedrawable seems to be cutting off some of the border because the shape itself doesn't extend outside those bounds. Is there not some way to offset where the shapedrawable starts drawing so that there is some padding between the bounds of the shape itself and the canvas? I have tried both ShapeDrawable.setBounds to larger than the intrinsic size of the shape and ShapeDrawable.setPadding but don't seem to be getting anywhere. Should I be subclassing Drawable instead?

View 1 Replies View Related

Android :: Add Shape To TextView CompoundDrawables

Oct 14, 2010

Instead of using in my layout ImageView and TextView I am now adding the image like this:
text.setCompoundDrawablesWithIntrinsicBounds(0, mImagesId[position], 0, 0);

In order to add border to the ImageView I defined a shape xml that I am using as a BackgroundResource.
How can I now add the shape to the TextView image up compound ?

View 1 Replies View Related

Android :: Padding On Shape In Progressbar

Oct 27, 2010

I'm using xml file to define progress bar. I defined padding on background shape. But this setting will be sometimes displayed correctly, sometimes not. So If I start my application or Activity with progressbar inside, there will be correctly displayed progressbar with background and 'padded' progress. Then I close my application and start it again, and, progressbar is displayed without padded background, on next start will be displayed correctly and son on ... Could you please advice possible reasons for this?

xml file:..................

View 1 Replies View Related

Android :: Defining A Shape Xml Element In Drawable?

Dec 23, 2009

I dropped the following into the drawable directory in my Android 1.5 project: Code...

View 1 Replies View Related

Android :: Creating Diamond Shape View Using 2D Or 3D

Nov 22, 2010

how can we create diamond shape view using 2D or 3D,I need to show the Images in that customized view instead of default ImageView class

View 2 Replies View Related

Android :: Why Shape Line Black Instead White?

May 3, 2010

I have the following code:

<shape xmlns:android=""
<stroke android:width="1dp"/>
<size android:height="1dp" />
<solid android:color="#FFF"/>

android:background ="@drawable/line"/>

Why the line is black instead white? I have tried putting it inside a ImageView but the result is the same.
How can i set the opacity of the shape?

View 1 Replies View Related

Android :: Fill Irregular Shape With Red Color?

Oct 20, 2010

I am developing a application which needs to change the color of the irregular shape such as the shape of a rabbit...but you know, if you use the APIs,you will change all color of the rectangle shape.

View 2 Replies View Related

Android :: Making A Triangle Shape Using Xml Definitions?

Mar 25, 2010

Is there a way that I can specify a triangle shape in an xml file?

<shape xmlns:android="" android:shape="triangle">
<stroke android:width="1dip" android:color="#FFF" />
<solid android:color="#FFF" />

can we do this with a path shape or something? I just need an equilateral triangle.

View 1 Replies View Related

Android :: How To Add Padding To Gradient <shape> In Phone

Oct 25, 2009

I have a shape with a gradient that I'm using as a divider between ListView items. I've defined it as follows:

<?xml version="1.0" encoding="UTF-8"?>

android:angle="0" />

I would like to add 6 pixels of padding on either side of the gradient, so that it doesn't extend from edge to edge of the screen.

However, no matter where I put an android:left="6px" and android:right="6px", it doesn't seem to take effect. I can put it in the <shape> element, the <gradient> element, or in a separate <padding> child of <shape>, and it doesn't change anything.

How can I add padding on the left and right of my list divider?

View 2 Replies View Related

Android :: Padding Doesn't Take Effect For Shape In XML

Aug 15, 2009

I am trying to set padding in shape declared in XML file. But whatever I set, nothing changes related to padding. If I modify any other properties, I see updated UI. But it doesn't work with padding. Could you please advice possible reasons for this?

I will provide below example of my shape.xml:

<shape xmlns:android="" android:shape="rectangle">
<stroke android:width="1dp" android:color="#ffffff" android:dashWidth="2dp"/>
<solid android:color="@color/button_white_cover" />
<corners android:radius="11dp" />
<padding android:left="1dp" android:top="20dp"
android:right="20dp" android:bottom="2dp" />

View 1 Replies View Related

Android :: Possible To Change Default Shape Of A Button?

May 15, 2010

Is it possible to change the default shape (i.e rectangular) of the button (normal button as well as imagebutton) to something else maybe like star or a triangle in Android?

View 1 Replies View Related

Android :: Sdk - Methods For Converting Shape To Path?

Aug 20, 2010

The Canvas class does not take Shape as a parameter for any of its methods. There is no drawShape or clipShape, etc... So, I need to use Path instead. Does android sdk expose any way to convert Shape to Path or Path to shape? I haven't been able to find relationship any between the 2 classes...?

View 1 Replies View Related

Android :: Change Button Shape To Oval Like One?

Nov 8, 2010

I want to change my Button shape to an oval like button.

View 2 Replies View Related

HTC Tattoo :: Mini USB An Odd (asymmetrical) Shape

Nov 12, 2009

I had always assumed that HTC devices used a standard mini-USB for charging and PC connection. I was surprised to find when I got my Tattoo that the USB port is an odd "lopsided" shape and thought that would limit me with cables. However, I was in my car last night and connected it to the standard mini-USB I keep in the car for charging my Visorlite and external GPS unit - and it fitted (and charged) What's going on - why the odd shape if the standard mini-USB fits anyway - and surely the correct shape socket woudl provide a better connection?

View 4 Replies View Related

Android :: Arbitrary Shape ImageView That Respond Events?

Aug 14, 2009

I need some arbitrary shape imageView that can respond events. How can I do that?

View 3 Replies View Related

Android :: OpenGL - Set Monochrome Texture To Colored Shape?

May 15, 2010

I'm developing on Android with OpenGL ES, I draw some cubes and I change their colors with glColor4f. Now, what I want is to give a more realistic effect on the cubes, so I create a monochromatic 8bit depth, 64x64 pixel size PNG file. I loaded on a texture, and here is my problem, which is the way to combine the color and the texture to get a colorized and textured cubes onto the screen?

I'm not an expert on OpenGL, I tried this:

On create:...................................

View 1 Replies View Related

Android :: How To Make Shape With Left-top Rounded Corner?

Jun 16, 2010

I want to make a shape with with left-top rounded corner and left-bottom rounded corner...

View 2 Replies View Related

Copyrights 2005-15, All rights reserved