My device Firmware version is 1.6 and whenever I run my application on Device I got an error :
CODE:......
I think I am getting this error because of "android.provider.ContactsContract" class to build my application? because it's API level is 5 .
How can I run a single build on 1.5 and 1.6 and 2.0 - above sdk ?
View 1 Replies
After the first time I (re)install a new APK sometimes I get VerifyErrors when an Activity references another Activity that extends MapActivity. The app will crash, and then when I restart it it works fine.
This is only on 1.5 targets with the google API addons (target 3). If anyone has any suggestions please let me know.
Here is the logcat:
CODE:................
Sometimes, when a user updates my app from the market (from one version to another) they get a VerifyError upon running the app. It happens to a random class; you can use part of the app, then going to a different Activity in the app causes it to blow up. This only happens once; once Dalvik gets it out of its system it never happens again.
Since it only happens once per update (and most of the time, not at all), it is admittedly a minor issue, but I think it reflects badly on my app, so if anyone has any ideas that would be great.
The stack traces don't seem that helpful, since they always happen in a different place (which further confuses me).
Here's an example of one:
CODE:..................
I'm currently trying to port the famous complex event processing runtime "Esper" to the Android (2.2) platform and am facing a VerifyError, which I - although reading several other post on VerifyErrors - do not understand.
The project I am trying to build and run contains only Java sources (no libraries). Therefore, I assume, that if these are compiled successfully, they would pass the verification process. But during runtime, I get the following error:
CODE:......
The source of "EsperEPL2GrammarParser" is quite big ( > 40,000 lines) and so is the above mentioned inner class DFA156, which mainly contains a switch-statement (> 60 cases) and each case contains several (> 50?) if-then-else statements. Just an idea ... when reading the error message above (invalid switch start: at 8, switch offset -31132, count 34530) my alarm bells ring, cause some values around 32768 (16 bit range) always make me nervous.
Nevertheless, I am confused with this VerifyError and would appreciate any help getting closer to the error's source. What can I do to encircle the error ?
I need Help for this issue :
http://code.google.com/p/android/issues/detail?id=4006
I'm getting VerifyErrors when running unit tests. My tests are setup as a separate eclipse project which references the project I am testing. I have a class in my project which I use fairly heavily in my test project and this class is getting rejected by Dalvik.I also have a third party jar on the build path of both the project under test and the test project. This causes no problems when running the project under test so I can't see why it should when running the test project, basically I'm stumped. I have posted the error text below, MyProjectClass is a class in the project under test which is used fairly heavily in the test project.
View 7 Replies View RelatedI have created a small and simple android app. I tried installing it on an actual android device. But because it won't install, I created an AVD resembling my phone. I tried copying and installing app on that AVD and it still says that error. "Application xxx could not be installed on this phone".
Before I tried installing my app on the phone or AVD I following steps:
1. Exported an unsigned copy of application onto my hard-drive.
2. User jarsigner to sign the app
3. Verified with jarsigner that my app is signed properly.
4. Used zipalign to optimize the app resources.
I do not have an icon assigned to myapp but mandatory properties like version etc. have been specified properly.
I had initially developed app using 2.1 version but because of compatability issues with my phone I reverted code to compile on 1.5 and it still doesn't get installed either on AVD or my phone.
My AVD is on 2.1 though and code is compiled with 1.5.
Is there a place where I can see the logs as to why app is not getting installed.
While debugging, Log.d() or Log.e() methods come to LogCat, but how do I capture the runtime error or trace log on the Android device when it is not connected to the development environment ?
View 1 Replies View RelatedMy .apk file is confirmed working, however for users of the Motorola Milestone (which runs the same android version 2.0 and up) they receive the error upon attempt to install. I've googled and searched through the other questions here. The error seems to normally only appear if you did something wrong in the signing wizard or renamed the file. Is it possible that some kind of software difference on the OS build on these Milestones is preventing the install?
View 1 Replies View RelatedI've been struggling with what seems like a straight forward issue for some time now, and any suggestions would be appreciated.
View 4 Replies View RelatedWe already use Android API. But sometimes I want to know is it verified or not? by whom?(e.g. Android team in google) by which one? (e.g. Unit test or Basic Acceptance Test for API) Do android team have any test report? Because this is a platform for smartphone. For example, if there has any problem in Android API (e.g. Date and Time), it makes customer spend money and time more. But I can't find any report about verifying API test. If you have any information about it, please let me know :) Also if there has no information, how can I test some API to verify API.
View 4 Replies View RelatedBy using command prompt access the device shell/terminal. then use the su command getting permission denied error. Why this happening? how can i solve this problem.
View 4 Replies View RelatedI am trying to edit the hosts file to access rest services in my local network. Using adb pull I am able to get the hosts file for the emulator and edit it. However I get the error "No space left on device" when I do an adb push.
Does anyone know how to resolve this issue? Can we increase the space for /system? If so how? Are there any other easier ways to access local area network (without creating a DNS server).
Used Toast root this morning successfully and without problem. Trying to use evo-recovery and every time I try to do anything I get the error, "error: device not found." Any ideas how to fix it?
View 5 Replies View RelatedI've already installed the drivers and my phone is recognized in the device manager. I already set my phone to usb debugging. I opened the command prompt in windows 7, then i followed the instructions, then i typed "adb devices" and it flashed "List of devices attached" only. when i typed "adb shell", it says "error: device not found".
How can I root my phone successfully?
My current software version is "V08b" and i'm sick of it because its full of bugs.
I tried to update my software using LGMobile Support Tool..it dectects my phone as LGP690 but it says that i have the latest version. But when i clicked "supporting models", it says that p690 is updateable to V10b..
I'm facing a recurrent problem that I don't know why it is happening. It happens all of a sudden. I didn't do anything different from what I was doing before. I'm using these tabs: http://developer.android.com/resources/tutorials/views/hello-tabwidget.html. When I open one of the three tabs (Class name = Tab1), this problem comes out. Before, this error came out after clicking all of the tabs.
A part of the stack trace: Could not find class 'org.android.catsMobile.packageName.Tab1$OrderAdapter', refereced from method org.android.catsMobile.packageName.Tab1.onCreate [...] threadid=3: thread exiting with uncaught exception (group=0x4000fe70) java.lang.VerifyError: org.android.catsMobile.packageName.Tab1.
I have one android project. I have one class file of about 6000 lines when i tried to add more code it shows the java.lang.verifyerror.
View 2 Replies View RelatedK my frustration level is definitely climbing.I've checked and don't see anything related to this specific issue.I'm following the step by step instructions on RootYourDroid. Have tried both the custom recovery image (adb shell is what's getting me that message) and the busybox instructions. Each time, in the adb window when I try either option I get an "error: device not found" After doing some research, I found info saying it likely had something to do with the debugging drivers. So I uninstalled them, reinstalled them and went through that whole process again. Tried both the busybox and custom recovery image steps. Still getting the error message.
Anyone have any experience with this issue that might be willing to sling some help my way?
I know ADB was working before I updated to 2.1 root. Looking at the USB devices the current driver isn't compatible with the phone now. Is there a change I need to make to get the USB driver to work? Yes I have USB debugging on.
View 4 Replies View RelatedI have adb 1.0.31. It works when I boot system.If I try use it in recovery mode got:
error: device offline
I've seen different posts about this, but none for the captivate, and none in the past month, so.Last night I rooted my captivate using the stickied thread in this forum. Worked great! Simple, and not much to it. I have the Superuser Permissions app in my app list.This morning I installed the android sdk and the drivers from the samsung website, enabled usb debugging on my phone, connected the phone, and did the following in my cmd prompt:.C:android-sdk-windows yes, that is the correct location of the android sdk folder) but all i'm getting is 'error: device not found'. I tried uninstalling my drivers and doing it again, this time connected to a different USB port, and still the same thing. Anyone have any insights? I'm able to successfully connect my phone to my machine and view it like a storage device (drag folders around, etc)
View 11 Replies View RelatedWhen I type ADB devices, it comes up with this error: 'adb' is not recognized as an internal or external command, operable program, or batch file. I already installed the adb drivers, and Windows told me the drivers updated successfully. Any idea why I am getting this error? I hope to be rooted by the end of the night!
View 24 Replies View RelatedTried to search but couldn't find anything on this. I'm trying to use 'adb shell' to begin blocking OTA updates, and encountered this error message.
View 3 Replies View RelatedI have 2.3.6 gingerbread OS. I want to factory reset it. but it reboots and my installed apps are still here. Then I want to reboot in recovery mode but it boot in normal mode. Then i try to reset it by using ADB Terminal. When i enter the command it says:
Cannot open /dev/tty0 permission denied
What is missing in my phone?
I'm trying to "install zip from sideload" using ClockworkMod on AT&T Fusion 2.
At the CMD I type: adb sideload cm-10.1-20130602-NIGHTLY-u8665.zip
And get this error: more than one device and emulator
Was having the exact problem described in this link trying to get my Google Voice account setup with the Google Voice App on my Incredible. Been trying, failing, and searching for days. Stumbled on this today and it fixed me right up. Android Google voice app will not verify phone (used to work on previous Android phone) - Google Voice Help
The answer from from "mbligh" is: "I fixed this. I think it's Google's "interesting" login management, where though you have one email address, it can be multiple accounts on the backend. If you're foo@bar.com and it asks you which account you want to use and that's one of the options, pick "other address" and type foo@bar.com again and your password. Now it works. Makes absolutely no sense whatsoever, but still."
i get following error, if i test my app on a real android phone. On the emulator, my app works fine.
W/dalvikvm( 321): threadid=3: thread exiting with uncaught exception (group=0x4000fe70) E/AndroidRuntime( 321): Uncaught handler: thread main exiting due to uncaught exception E/AndroidRuntime( 321): java.lang.VerifyError: de.stefandahmen.android.TourList E/AndroidRuntime( 321): at java.lang.Class.newInstanceImpl (Native Method) E/AndroidRuntime( 321): at java.lang.Class.newInstance (Class.java:1472) E/AndroidRuntime( 321): at android.app.Instrumentation.newActivity(Instrumentation.java:1097) E/AndroidRuntime( 321):.....
I have a build a android application which works fine. After that, I create a jar file from that project for other applications to use. I added the jar as external jar for other application. It can compile correctly. However, when it runs, I always get the error "Jave.lang.verifyError".
View 3 Replies View RelatedI created a custom content provider in one android application following all guidelines from developers.android.com and an activity in same application with an edittext and a button. when ever i enter any integer value and click on the button, using custom content provider am inserting value to a sqlite database this worked fine. but when i created another application and tried to access the custom content provider by importing custom provider class am getting the following exception:
W/dalvikvm( 418): VFY: unable to resolve static field 29 (CONTENT_URI) in Lcom/ mypack/android/mycontentprovider/MyProvider; W/dalvikvm( 418): VFY: rejecting opcode 0x62 at 0x0047 W/dalvikvm( 418): VFY: rejected Lcom/mypack/android/ appwidgetsettingstest/Test Activity;.onCreate (Landroid/os/Bundle;)V W/dalvikvm( 418): Verifier rejected class Lcom/mypack/android/ appwidgetsettings test/TestActivity; W/dalvikvm( 418): Class init failed in newInstance call (Lcom/mypack/ android/ap pwidgetsettingstest/TestActivity;) D/AndroidRuntime( 418): Shutting down VM W/dalvikvm( 418): threadid=3: thread exiting with uncaught exception (group=0x4 001aa28) E/AndroidRuntime( 418): Uncaught handler: thread main exiting due to uncaught e xception E/AndroidRuntime( 418): java.lang.VerifyError: com.mypack.android.appwidgetsett ingstest.TestActivity E/AndroidRuntime( 418): at java.lang.Class.newInstanceImpl(Native Method ) E/AndroidRuntime( 418):.......
How to verify if the system update has been installed on my phone or not? I accepted the download, but did not run the install. I then ran a factory reset to try to clean things up. But then worried that it auto-installed when the phone reset. Any ideas how to check what I got?
View 3 Replies View Related