I captured an image by android G1, now trying to display it as ImageView but it gives me memory allocation exception.
CODE:.............
The default image resolution of G1 camera is 2048 * 1536
I also tried to compress image on selection but still same exception.
CODE:.............
View 4 Replies
Below is my code to make bitmap from network-jpeg-stream whose size is 360*288 i don't know how to handle it
CODE:.............
logcat - error:
CODE:................
I am getting a "bitmap size exceeds VM budget" error. I have read that there is a 16MB memory limit. In this thread Romain Guy says that "you can only allocate 16 MB of memory for your entire application".
However, my app must be running out of memory long before it reaches that limit. So my question is: how do I allocate memory to my application ... how can I get the allocation to my app increased (within the 16MB maximum)?
I have an app that displays a camera picture as part of it, but if the picture is in memory I get an out of memory exception when an allocation of any size happens no matter what. If the app uses a seekbar in addition to my PictureView the ~900 bytes it allocates are too much. I even tried to load a 16x16 monochrome image on top of the camera pic, but the 256 bytes were too much. I find it extremely unlikely that the object containing the image is precisely the size so that using it alone never causes a crash, but allocating even 256 more bytes exceeds the memory budget. Does anybody know what the problem is?
View 3 Replies View RelatedIs there any way to pre allocate the memory required for a bitmap. Android's memory model is making it very difficult for me to cache images I need to cache.
It would seem the problem is because the VM heap rarely shrinks itself, so I would like to just allocate memory for bitmaps ahead of time? but I can not figure out how to do this?
Some of you may met the same problem, I was using BitmapFactory.decodeStream, and got this exception: Code...
I know the reason is because the BitmapFactory is trying to decode an uncompressed version of a big image(in my situation, jpg). I can use BitmapFactory.Options.inSampleSize to fix it. but my question is what's the maximum size that VM would like to allocate for loading a image with BitmapFactory? so I can do some scale before it loads.
I have a 16mb binary file and I want to read bytes without using any loop. like if i want to read 16 byte i can pass 16 to some method(if there is any) and it give me my desired result... right now i am using loop for reading bytes but my application is so huge i am afraid that it do not get slow.
View 4 Replies View RelatedI have a frame of 22 bytes. The frame is the input stream from an accelerometer via bluetooth. The acceleromter readings are a 16 bit number split over two bytes.
When i try to merge the bytes with buffer[1] + buffer[2], rather than adding the bytes, it just puts the results side by side. so 1+2 = 12.
How to combine these two bytes to obtain the original number. (btw the bytes are sent little endian)
I'm trying to get a byte array of an image saved locally on the phone. I'm using the code...
How can I get the Bytes?
I wrote a simple test driver to test the bluetooth apis. Anyone can verify whether I am using the API correctly?
Everything seems good but no data read:
Before calling the following, inquiry scan successfully returned, and the remote device is pre-paired.
CODE:..............
I am using the AudioRecord class to analize raw pcm bytes as it comes in the mic.
So thats working nicely. Now i need convert the pcm bytes into decibel.
I have a formula that takes sound presure in Pa into db. db = 20 * log10(Pa/ref Pa)
So the question is the bytes i am getting from audiorecorder from the buffer what is it is it amplitude pascal sound pressure or what.
I tried to putting the value into te formula but it comes back with very hight db so i do not think its right
I have a function I am using to upload files. How can I get the number of bytes of the file that have been uploaded (transferred)? Can I setup a timer that does this? If so, what variable to I read to get the number of bytes uploaded?
Here is my code:
CODE:....................
An Android app I'm writing involves quite a lot of downloading of content (think podcatcher/RSS).
I would like to be able to give the user an indication of how many bytes they've downloaded, so they can make the decision whether they want to use Wifi or not.
To this end, I have found a way of counting the number of bytes read by the app, by wrapping an InputStream in a simple CountingInputStream.
However, this does not take into consideration basic things like packet headers and HTTP headers. More importantly, it does not take into consideration any compression that content may be encoded with.
So, how many bytes did my application download over the network? I'm not so interested in the number of bytes uploaded, but if know how, don't be shy.
I have gone down a fairly low level approach as I am feeding the input stream into an XML PullParser. I will also be needing to do a similar exercise with dumping bytes (images in this case) straight onto the SD Card.
I create data file in android for my application in the app's data directory. The write is successful with no exceptions but file contents are not complete. It truncates at 90112 bytes. Any idea what is going on ? Is there a limit ?
Here is the snippet
CODE:....................
I have a problem.
1 - From a webservice. NET 2008 (vb), I have a method that returns an array of bytes, the byte array is actually a string "Hola Mundo" ("Hello World" in English) compressed with the Class of System.IO.Compression GZipStream.
2 - The method returns the string "Hola Mundo" compressed, and this is what the webservice returns:
CODE:..............
3 - if I do a test from a windows application from Visual Basic. NET to run this method returns me this string and Unzip with another function I have, it brings me the "Hola Mundo" ....
4 - On Android (Eclipse) and I managed to make the request and bring me the previous string ... but do not know how to decompress and show me "Hola Mundo" ...
5 - I have tried several codes from the web, but none work.
Am trying to store all images in my server, then i need to show based on requirements, i am able to store and restore bitmap bytes but i cant recreate the bitmap using stored bytes , pls find my code below and suggest me a solution if i doing wrong.
Converting Bitmap to Bytes. Code...
I'm developing an android video uploading app and uploading large amounts of video is a problem, I get different type of exception sometimes (host not resolved, pipe broken), I do a multipart POST but I have a feeling if I upload chunk of bytes one at at time that'll increase upload speed as well as solve connection timeout and these type of problems.
View 1 Replies View RelatedI am trying to follow the instructions on this page to create a trace file. I can see the file in File Explorer in DDMS and can pull it onto my PC but it is zero bytes long.
Any suggestions as to what I might be doing wrong, please?
I've tried recording video using MediaRecorder API but the file that gets saved each time is of 0 bytes.
I use the MediaRecorder recorder = new MediaRecorder(); ad then recorder.setVideoSource . . .recorder.prepare() to generate the preview and when the user clicks record, i say recorder.start() but the file recorded is of 0 bytes. And after some time, recorder.stop() -on user click that is.
I'm building an android app and I'm currently having trouble retrieving a bitmap from an URL.
Here is the code I'm using :
CODE:..........
Everything works fine when the picture's write but when some bytes are wrong, result gets null. I think it's basically expectable as it's written this in the doc of BitmapFactory.decodeStream :
If the input stream is null, or cannot be used to decode a bitmap, the function returns null. The stream's position will be where ever it was after the encoded data was read.
The problem is, my wrong picture is well interpreted by my web browser and I can do so on iPhone platform.
Is there a way to sort of ignore those wrong pixels? maybe with the option parameter?
I bought iball andi 5li android smart phone a few days back. The configuration of the phone is:
512mb ram
4gb internal
1.2ghz cortex a9 processor
android 4.1.2
Although my device runs almost every app out there (including temple run, subway surfers etc.) but occasionally im facing problems.
Problem occurs after 3-4 days of restarting the phone. When i restart and check the ram usage it says 350 mb (approx) as used and 150mb(approx) as free ram every app runs smoothly but as days pass by gradually the free ram starts decreasing down to 30 mb where all the apps (games and browsers) start crashing with a low memory message. then the conditions get worse after approx 2 hrs free ram is now 0.0 bytes and even the launcher,settings etc crash with a low memory message. The only solution out is to restart the phone.
[used androids before and is quite aware of closing or killing apps but none is working]
Already Tried:
# removing apps from recent list
# stopping apps from Setting>apps>running apps & cached apps as well
# restoring to factory defaults
# used ram freeing apps (no change on ram)
I'm developing an android app that will play mp3 files. However the mp3 files are encrypted on the sd card or sqlite. Either ways, after decryption, i'll have a stream of bytes. How do i play them? MediaPlayer does not take inputstream as parameter, so i cannot consider that.
View 2 Replies View Relatedwhat are the different numbers under the "bytes" section of the app when running?
Is the second number how much i have used or is it the first number ?
today i meet the problem.i need technic can control the android machine from server.then i want send data from server to android with no request from android.
View 2 Replies View RelatedI'm trying to open a dialog window, but every time I try to open it it throws this exception:
CODE:.................
I'm creating it by calling showDialog with the display's id. The onCreateDialog handler logs fine and I can step through it without an issue, but I've attached it since it seems like I'm missing something:
CODE:............
Is there something missing from this? Some questions have talked about having this problem when creating a dialog from onCreate, which happen because the activity isn't created yet, but this is coming from a call from a menu object, and the appContext variable seems like it is correctly populated in the debugger.
I'm writing an application which connects to a back office site. The backoffice site contains a whole slew of JavaScript functions, at least 100 times the average site. Unfortunately it does not load them, and causes much of the functionality to not work properly. So I am running a test. I put a page out on my server which loads the FireBugLite javascript text. Its a lot of javascript and perfect to test and see if the Android WebView will load it. The WebView loads nothing, but the browser loads the Firebug Icon. What on earth would make the difference, why can it run in the browser and not in my WebView? Any suggestions.
More background information, in order to get the stinking backoffice application available on a Droid (or any other platform except windows) I needed to trick the bakcoffice application to believe what's accessing the website is Internet Explorer. I do this by modifying the WebView User Agent.Also for this application I've slimmed my landing page, so I could give you the source to offer me aid. package ksc.myKMB;
import android.app.Activity;
import android.app.AlertDialog;
import android.app.Dialog;
import android.app.ProgressDialog;
import android.content.DialogInterface;
import android.graphics.Bitmap;
import android.os.Bundle;
import android.view.Menu;
import android.view.MenuInflater;
import android.view.MenuItem;
import android.view.Window;
import android.webkit.WebChromeClient;
import android.webkit.WebView;
import android.webkit.WebSettings;
import android.webkit.WebViewClient;
import android.widget.Toast;
public class myKMB extends Activity {
I already have JavaScript on the web browser on, the problem is the web view is acting to different from the web browser.
I want to implement my own Tokenizer base on the file
"MultiAutoCompleteTextView.java",
but I encounter an error "com.android.internal.R cannot be resolved" when I try to
import "MultiAutoCompleteTextView.java" to my project.
code:.................
I haven't research any solutions to resolve this problem.How to correct "com.android.internal.R.attr.autoCompleteTextViewStyle" my own attr?
1- Does Android Browser (Éclair code base) support the "plug-in" or not?
2- Why "Google Gears" support is removed from the clair code base?
I searched the forum and came to know that earlier version of the Android does not support it at all? Here is the link for that, but this query asked in Dec'2008.
At first,I have a database created by using Ruby on rails.I just already implement insert function(HTTPPost) in my Android Application and it's work.But I don't know how to retrieve specific record from my databases and insert it back to specific record in Android (Like edit function in RoR)This is my insert code :
private void insertComment() {DefaultHttpClient client = new DefaultHttpClient();HttpPost post = new HttpPost("http://10.10.3.87:3000/comments");
// Configure the form parameters
List<NameValuePair> nvps = new ArrayList<NameValuePair>();
nvps.add(new BasicNameValuePair("comment[content]", t_comment.getText().toString();
nvps.add(new BasicNameValuePair("comment[id_account]", "1"));
nvps.add(new BasicNameValuePair("comment[id_place]", Integer.toString(position)I really try many ways out but it doesn't work and it takes very long time to fight with this piece of code. Actually, I really don't know how to specify RowID to HTTPPost.
I am doing some android development, and now I need to send some android application generated data onto a remote server (a database)?How can I do that? can I use direct JDBC connection and sql?
View 1 Replies View Related