Android :: Testing A Java Long Value In An If Statement - Does 0 != 0
Nov 2, 2010
I cannot figure out why I can't get this method to enter the if statement.
CODE:.........
Note that the log and debug mode shows that "start = 0"
I also tried
if (start == 0l) {
if (start == 0L) {
What the heck am I missing here? Does 0 != 0?
I'm developing in Eclipse with Java for Android. Thanks.
@methodin - no sorry, that does not work.
@Aioobe - I have a breakpoint under the IF statement, that never gets made.
Here is the actual code I'm running since you've asked.
CODE:................
View 4 Replies
May 26, 2010
How do I make the Java assert statement work? By "work" I mean that a failed assertion should either stop program execution or at least log the failure. Currently, neither happens. I understand there is a run- time option to enable this (-ea), but I don't know where to specify it. Changing "PreferencesJavaInstalled JREsEdit JREDefault VM Arguments" has no effect, probably because those settings are not used for the Android execution.
View 5 Replies
View Related
Aug 30, 2009
I would like to write OpenGL classes and test them in java outside of an Android device or emulator, and then use these in the Android.
Has anybody done this?: If so, are there JOGL implementations that are directly compatible?
I tried doing this on Windows using JOGL and writing wrappers, etc, but it turned out to be a real mess. I finally gave up when I didn't know how to get a GLU instance for a frustrum call.
View 4 Replies
View Related
Oct 20, 2009
i get following error, if i test my app on a real android phone. On the emulator, my app works fine.
W/dalvikvm( 321): threadid=3: thread exiting with uncaught exception (group=0x4000fe70) E/AndroidRuntime( 321): Uncaught handler: thread main exiting due to uncaught exception E/AndroidRuntime( 321): java.lang.VerifyError: de.stefandahmen.android.TourList E/AndroidRuntime( 321): at java.lang.Class.newInstanceImpl (Native Method) E/AndroidRuntime( 321): at java.lang.Class.newInstance (Class.java:1472) E/AndroidRuntime( 321): at android.app.Instrumentation.newActivity(Instrumentation.java:1097) E/AndroidRuntime( 321):.....
View 3 Replies
View Related
Feb 24, 2010
I wrote a simplest test based on android.test.ActivityInstrumentationTestCase2.
CODE:..............
View 2 Replies
View Related
Oct 1, 2010
In Android, capturing date from datepicker and storing as string in sqlite. Sorting by date doesn't work because they're strings (unless I'm doing it wrong.I've googled this issue for ~5 days, and it looks like there should be a way to capture the date from the date picker, convert it to a Long, store it in sqlite as a Long, select and sort on the Long date value, then convert the Long back to a "mm/dd/yyyy" string for display. I've tried various combinations of parse statements, Date, FormatDate, etc. with no luck at all.On activity start, get today's date and display it in button which calls the datepicker.Capture new date from datepicker (if one is entered), save it as a long to sqlite.On opening an activity showing a listview of records, select from sqlite with orderby on date (Long), convert Long to "mm/dd/yyyy" string for display in ListView.
View 3 Replies
View Related
Apr 16, 2009
I've been exploring the Android test package and I'm very confused on how to implement functional testing for endpoint-to-endpoint.
Consider the example below, I have 4 activities: 1. A Contact List Activity 2. A View Contact Activity 3. An Add/Edit Contact Activity 4. A Sync Contact List activity
I want to automate a few tests that will go through multiple test cases simulating a user experience: From launching the application, to selecting 'Add contact;' opening the add contact activity, entering data, saving it, going back to the list activity, and verifying the new contact was saved properly.
As I understand it, ActivityInstrumentationTestCase<T extends Activity> and ActivityUnitTestCase<T extends Activity>, are only useful for testing single activity functionality.
But what if I need to switch between 2 or more activities inside a single functional test case?
View 5 Replies
View Related
Feb 16, 2010
I have a strange issue. I am new to java/android but come from a programming background maybe I am just missing or doing something stupid with syntax here. I have a string variable called reportlength
String reportlength;
I then go: reportlength = intent.getExtras().getString("ReportLengt");
Now in my debug console for the variable reportlength it has it set as "d" (that is the correct value it should have)
At this point I have my if statement:
CODE:......................
View 3 Replies
View Related
Jul 20, 2010
So I've got this code (updated for solution).
CODE:.............
The problem I was having was that one of the TextViews would turn grey when it wasn't supposed to. I tried fixing it by always setting the text to black again, but that turned every single one of them grey.
Until I tried:
CODE:................
Don't know why the latter works when setting text grey, but there it is. I guess I'm just a little retarded.
View 7 Replies
View Related
Jan 26, 2010
How can I enable assert statement on Android? I have referred to a url: http://android.git.kernel.org/?p=platform/dalvik.git;a=blob_plain;f=d... and done what it said: adb shell setprop dalvik.vm.enableassertions all but nothing happen! The test code is: Log.v("assert 1","1"); assert false; Log.v("assert 2","2"); No matter what I did, "assert 2" will be printed, which means "assert false" does nothing! What should I do? BTW, I use eclipse as IDE.
View 7 Replies
View Related
Jul 23, 2010
I'm developing an application that tracks the user's current position and stores it into a SQLite database. Everything works fine, but now I have the problem when querying the database for a track with more than 1000 records it takes nearly 1.5 minutes. On my Desktop it just takes 1 second. I know it's a query with many subselects but I wasn't able to get the right result another way. In my opinion this belongs to the aggregate functions like avg() and sum().
Here's my query:.................
View 3 Replies
View Related
Sep 27, 2010
I'm trying to reduce the number of queries I do to the Android's database. Basically I want to get any email or IM address that contains a user defined search term. Right now I'm doing two separate queries:
Email:...............
View 3 Replies
View Related
Mar 1, 2010
I know the error will probably be painfully obvious to you but using cursor.getCount() on the result of the following returns a 0 when there are multiple items in the table and trips the error "Invalid statement in fillWindow()".
CODE:...............
View 3 Replies
View Related
Jul 15, 2010
CODE:...........................
View 1 Replies
View Related
Mar 23, 2010
I have a query that selects rows in a ListView without having a limit. But now that i have implemented a SharedPreferences that the user can select how much rows will be displayed in the ListView, my SQLite query doesnt work. Im passing the argument this way:
CODE:...................
View 1 Replies
View Related
Jul 28, 2010
I'm getting unexpected behavior in my Android 1.5 application under the Windows emulator and debugging with Eclipse. Here's a generalization of what the code is doing:
if (someCondition) {
System.out.println("got here");
return "a";
}
if (someOtherCondition)....................
View 2 Replies
View Related
Aug 13, 2010
When creating my SQLite database in Android I set the database locale - db.setLocale(new Locale("cz_CZ")). This is a Czech locale. A SELECT statement works and takes the locale into account, for example:
SELECT * from table WHERE name='sctzy' COLLATE LOCALIZED
But using LIKE will fail: SELECT * from table WHERE name LIKE '%sctzy%' COLLATE LOCALIZED
BTW. There is no java.text.Normalized class in Android. I thought I could make a second column with a normalized text, stripped of special characters, which would be used for searching - but I am missing a class or way how to normalize the String.
View 1 Replies
View Related
Aug 25, 2010
I have a central activity that can be launched from two separate classes. I was hoping that in this central activity I could have an IF statement like
if(this.getIntent() == MainMenu.class)
{
// Do something here
}
But obviously that isn't legal so how could I structure an expression to check from what class an intent was started.
View 2 Replies
View Related
Nov 16, 2010
i sometimes see this error in my logcat output, Cursor: invalid statement in fillWindow(). it sometimes happens when i press the back key and then it goes to the default android listview before going to my custom listview. what does it mean? how do i solve it? Because it does not point to any line of code where the problem is coming from?
View 1 Replies
View Related
Aug 1, 2010
Does anyone have a statement released from Google or someone within Google telling the consumers to avoid Task Managers on Android devices.I went into VZW, trying to get an additional battery (usually if u complain they send u an additional battery) because I'm getting 5-7 hours out of my battery even when I'm careful and try to stretch my battery. So the women asked questions, do u use Wifi...NEVER, don't even turn it on. Brightness? It's 1/8th of the way on to full brightness, Task manager?No Google said not to use one..So she wouldn't send me a battery because she said that its because I don't use a task manager.I was telling her Google had advised us not to and she said, that's false that Google has approved them to put task managers on people's phones who are having battery problems.(I don't believe that)I looked around Google and could only find it from joe-shomes but couldn't find a statement from Google. Can anyone provide a statement from Google that advises us not to use task managers?
View 6 Replies
View Related
Nov 7, 2010
I need some help with switch/case statement syntax. im trying to use onClick to have different buttons do different things. i have the first one working. it just uses an intent to start a new activity. for the next button, i want it to open a specific url looks like this so far
CODE:..............
How do i get the engadget_button to open engadget.com?
Is it just something like this:
CODE:....................
View 1 Replies
View Related
Apr 25, 2009
Anyone working with big sqlite tables and trying to match rows using patterns (for example for autocomplete purposes) ? recently i played with LIKE statement and it seems it will never use table index (if any), you have to use GLOB instead. but....... the weird thing is that you cannot use selectionParams in your query: you have to specify your pattern in selection like:
CODE:........
My words table has two TEXT columns: 'key' and 'value' and index on 'key'
For example: i have table with ~28000 rows and when using selectionParams my query took 1500 ms and without selectionParams 20 ms does it have anything to do with android or its sqlite weird feature?
View 2 Replies
View Related
Jul 29, 2010
I got problem with register. I use an if-else statement to check whether the user left any blank. If there is any blank, an error message will appear. The problem is, even with no blanks, all filled up, the error message still appears and thus prevents user from registering. I can't find any error.
Please help me spot my error.
CODE:..................
View 2 Replies
View Related
Oct 15, 2010
CODE:............................
View 3 Replies
View Related
Oct 1, 2009
Let's say I have a few buttons in a LinearLayout, 2 of them are:
mycards_button = ((Button)this.findViewById(R.id.Button_MyCards));
exit_button = ((Button)this.findViewById(R.id.Button_Exit));
I register setOnClickListener() on both of them:
mycards_button.setOnClickListener(this);
exit_button.setOnClickListener(this);
How do I make a SWITCH to differentiate between the two buttons within the Onclick ?
public void onClick(View v) {................
View 2 Replies
View Related
Aug 17, 2010
So I have a API issue. So i am creating a class that utilizes AndroidHttpClient to download Bitmap images from my server. Problem is, it's API Level is 8 and I want this to be used FROM API 1 and above, now i know i can use DefaultHttpClient (the API is Level 1) but is there a way i can use both, being distinguished by Build.VERSION.SDK (btw thanx for the quick respose, Konstantin Burov and iandisme). So for example, if my device is 2.2 i use AndroidHttpClient, anything else use DefaultHttpClient. Of Course if I import the library it will give me an error on any device 1.5 to 2.1. Any Suggestions would greatly be appreciated, because in the future I would want to set other preferences based on API.
View 3 Replies
View Related
May 8, 2010
I am trying to update a datetime column in an android sqlite db to use international date format (yyyy-mm-dd) instead of the current format (mm/dd/yyyy). I want to use the sqlite date() function to reformat the current value of the column. I thought it would be as simple as the following: update tblename set thedate = date(thedate)
But the above does not work.
How would i write the sql statement to accomplish this?
View 1 Replies
View Related
Sep 20, 2010
I'm wondering whether prepared statements in Android (instances of SQLiteStatement) are thread-safe. In particular I'm asking with regard to the following scenario:
In a ContentProvider you create a pre-compiled insert statement during onCreate. Then, in the overriden insert method you make use of this statement by binding a set of parameters to it and calling executeInsert on it.
We know that a ContentProvider has to be written in a thread-safe manner. If SQLiteStatement does not bind parameters per thread, a concurrent call to the provider's insert method would alter the statement's bindings and result in unpredictable behavior.
Android's own Contacts provider uses prepared statements in this way (http://bit.ly/bDuKAT), so I tend to believe that they are in fact thread-safe. Looking at the source code of SQLiteStatement I don't see how though (http://bit.ly/9M1Swv).
So, is SQLiteStatement (or SQLiteProgram that is) thread-safe with respect to parameter binding or not?
View 1 Replies
View Related
May 11, 2012
I'm trying to select the items that have a expiration date >= that an selected date.I'm using the format yyyy-mm-dd, and this is my sql statement:
String sql = "SELECT _id, item, value, finalDate FROM "+DATABASE_TABLE+" WHERE date(finalDate) >= date("+selectedDate+")";
This query always result a "full select" in my database, as if there were no conditions.Some useful information:
selectDate is a String which have a date in yyyy-mm-dd format
I'm executing the query like this:
return db.rawQuery(sql,null);
View 3 Replies
View Related
Oct 28, 2009
For my application, I am trying to add entries without having a duplicate entry, and if there are a duplicate notify the user and have him try again. Using SQLite, which I know very very little about, I have tried these two ways and want to know which one is better, more efficient or a better way to develop it? First way:
db.execSQL("INSERT INTO " + DatabaseHelper.DATABASE_TABLE +
"(LATITUDE, LONGITUDE, RATING) SELECT " + latitude + ", " + longitude + ", " + rating +
" WHERE NOT EXISTS (SELECT 1 FROM " + DatabaseHelper.DATABASE_TABLE +
" WHERE LATITUDE = " + latitude + " AND LONGITUDE = " + longitude + ")");
Second way:
long id = -1;
try { id = db.compileStatement(
"SELECT COUNT(*) FROM " + DatabaseHelper.DATABASE_TABLE
+ " WHERE LATITUDE = " + latitude
+ " AND LONGITUDE = " + longitude)
.simpleQueryForLong();
} catch (NullPointerException e) { return -1;
} return id;
The first way, either inserts or ignores the values, I check by doing so, storing the row-count of the rows into a variable before the call, call that function, and then check its results. If the results is not higher than it was before the call, the insert was made ignored, prompt the user with the 'values exist' message. (Very sloppy, I know but desperate times calls for desperate measures). The second way, returns the actual count of rows that match the numbers I want to store, if the number returned greater than 1, prompt the user with the 'values exist' message. I have been going back and forth, trying different ways but I do not know how to set up SQLite to have UNIQUE pairs, which I was told would be the easiest.
View 3 Replies
View Related
