Android :: ScrollView Changs Behavior Of Layout Even When It's Not Active / Way Around It?
Jul 3, 2009
My problem is that I would like a button (e.g. Next) to be at the bottom of the screen, unless the content is larger than the screen, in which case it should be scrolled.
I can achieve having a layout at the bottom (either trough RelativeView layout_alightToParentBottom="yes", LinearLayout with a View with weight="1" and layout_height="0", or a TableLayout expandRow). However, with each one, once it is wrapped with a ScrollView, the button is brought up next to the previous component, and cannot be glued to the bottom. The ScrollView is not active (needed, components height less than the screen height), yet it affects the components in it. Is that a bug? Is there a way around it?
As I resorted to having alternative layouts for Landscape, 320x240 and code.
View 3 Replies
Apr 1, 2010
I want to have a textview (like a console or output window), which scrolls. I saw on this list that the TextView will not scroll on its own unless I wrap it in a ScrollView. So I did that and it worked. The problem is, it seemed no matter what I did I could not get the TextView to be higher than one line. This was only when it was embedded in the ScrollView, and didn't seem to change whatever I set the TexView's layout_height to.
Here is my layout:
CODE:..............................
View 3 Replies
View Related
Dec 21, 2009
I have an app where pressing button on the screen launches an intent with a new screen and buttons. Everything is working very well, but I'm got one small visual problem. When I press the button on screen on my phone, the new page slides in from the right, pushing the old page off screen left. This happens very quickly, but the overall effect is a bit jarring. Is there a way to stop pages from display this way? If possible, I'd like the page to just appear over the old page, without any scrolling.
Is this possible in Android?
View 2 Replies
View Related
Nov 24, 2010
I want to add xml layout dynamically to scrollview in my application . but it is showing error.
This is my code...
View 1 Replies
View Related
Nov 22, 2010
I'm able to successfully use a ScrollView inside the layout xml file for an application. However, when I tried using a ScrollView inside the layout xml file for a widget, I get a "Problem Loading Widget" error as soon as I drop the widget in the emulator. If I comment out the ScrollView, then the widget shows up in the emulator. I've pasted my layout xml file below. Any thoughts on how to get past this error would be much appreciated.
<LinearLayout
android:layout_width="fill_parent"
android:layout_height="fill_parent"
android:orientation="vertical"
android:paddingBottom="3dip">
<LinearLayout
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:orientation="horizontal"
android:paddingLeft="6dip"
android:paddingRight="6dip"
android:paddingBottom="3dip">
<Button
android:id="@+id/ok_widget"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:layout_gravity="right"
android:text="@string/button_ok" />
</LinearLayout>
<ScrollView
android:layout_width="fill_parent"
android:layout_height="fill_parent"
android:fillViewport="true"
android:layout_marginBottom="50dip">
<LinearLayout
android:id="@+id/linear_layout"
android:layout_width="fill_parent"
android:layout_height="wrap_content"
android:orientation="vertical"
android:paddingBottom="3dip">
</LinearLayout>
</ScrollView>
<RelativeLayout
android:layout_marginTop="-50dip"
android:gravity="bottom"
android:layout_height="wrap_content"
android:layout_width="fill_parent">
<LinearLayout
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:orientation="horizontal"
android:paddingLeft="6dip"
android:paddingRight="6dip"
android:paddingBottom="3dip">
<Button
android:id="@+id/ok_widget"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:layout_gravity="right"
android:text="@string/button_ok" />
</LinearLayout>
</RelativeLayout>
</LinearLayout>
View 1 Replies
View Related
Aug 2, 2010
I have problem in scrolling of webview vertically when it's scrolled along vertically,where this webview is with in scrollview tag,how can i enable the scrolling for webview and to disable the scrolling of whole layout when its on webview contained layout.
View 1 Replies
View Related
Feb 22, 2012
I am having an issue trying to setup a scrollview with a relative layout.
Here is my layout file
Code:
<?xml version="1.0" encoding="utf-8"?>
<LinearLayout
xmlns:android="http://schemas.android.com/apk/res/android"
android:orientation="vertical"
android:layout_width="match_parent"
android:layout_height="match_parent">
[Code]...
The scrollview is working correctly but the relativelayout is showing up correctly in my graphical layout view but I can't seem to see it on my phone or emulator. I want it to be displayed all the time and not a part of the scrollview. I just don't know how to fix it.
Here is how I would like it to work
View 4 Replies
View Related
Nov 24, 2010
I have 3 text views in a layout, where the text clips a tad on the bottom on my droid 2...how can I ensure that the whole text is viewable and the user can scroll down (simply with their finger) to see the rest of my text?
EDIT:
CODE:..................
View 2 Replies
View Related
Mar 9, 2012
I am using Eclipse Helios Service Release 2 and the project target is 2.2.
I have a xml layout that has a HorizontalScrollView and ScrollView with a LinearLayout. For some reason unknown to me the graphical layout will not expand when I add objects that exceed the size of the default screen size.
I have other xml layout files that will expand when using a single scrollview type, however when using two of them nested together it does not work.
I have attempted to use ScrollView then HorizontalScrollView and reversed to see if it is a order of priority issue with Eclipse. However this does not work.
There appears to be nothing missing from the properties of the scrollviews between those that will expand and the one that wont.
Is there something I am missing? Or is it not possible to have two different scrollview types in one layout and still have a auto expanding graphical layout editor? I would rather not define a specific screen resolution that would allow me to see all objects; I want the app to be adaptable to any device screen size.
View 1 Replies
View Related
Oct 7, 2010
If I have the following:
CODE:..............
How can I get the body (second EditText) to fill the rest of the screen, but still have the scrollview kick in when the contents of the body are too long? Like a height="wrap_content" and minHeight="fill_parent"
layout_height="fill_parent" seems to not do anything if you put them in a scrollview
A working example of what I want is the email app compose window
I tried this and the EditText elements act like they are wrap_content and no filling is happening. Just scrolling if you type enough
CODE:...................
View 2 Replies
View Related
Jul 16, 2010
I must be overlooking something real simple here, but i think i'm trying to do something fairly basic.. Simply retain the scrollbar position of a ScrollView on orientation change...
Here is the code for my onSaveInstanceState and onRestoreInstanceState.. sView is the container for the ScrollView layout. Within my scrollview is a linearlayout with a lot of textviews.
CODE:............
If I set a Toast with the values of sViewX and sViewY on the Restore, the values are kept and correct.
I just tried to do a sView.scrollTo(0,150); in my onCreate.. just to see if that would open the activity at 150px down, and it didn't. I think my issue has to do with the .scrollTo method.
View 1 Replies
View Related
Mar 10, 2010
I want some of the goodies in a ListView, like being able to use a ListAdapter, and item selection, etc, but I don't want the ScrollView portion of it. I want to implement that part myself, in a different way (why or how I do this isn't really the point of this question, so please don't ask "why"). Is there a way to have a ListView that's not in a ScrollView or has the scrolling disabled?
View 2 Replies
View Related
Jul 3, 2009
Is there a way to find all the alarms which is currently active set to go "off"?
View 2 Replies
View Related
Jul 13, 2010
Does anyone know how to set the notifications behavior on the EVO? Specifically with Google Talk? I would like the phone to beep at me only once when someone sends a google talk message, and then not ever again for the following messages until I unlock the phone's screen and reactivate the google talk app. I think it already works this way for email, but not for Gtalk. Can this be done? And, I already know that if I open up the chat session, the sounds shut off on successive messages. However I would like it to stop the beeping without opening the chat window.
View 1 Replies
View Related
Apr 21, 2010
I want to customize the spinner behavior a little bit. I want to add a couple of buttons at the end of the drop down menu that is displayed when the user selects the control. Any idea how this could be done?
View 4 Replies
View Related
Oct 24, 2009
I have a package with two activities
1. A main activity 2. A search activity
The search activity is invoked by a search suggestion provider in two possible ways
1. By clicking directly on a suggestion invoking the search activity through a VIEW action 2. By clicking on the explicit search icon invoking the activity through SEARCH action
If it is invoked through SEARCH I stay on the search activity and show some text to the user. Now when I click the back button I go back CORRECTLY to the home page.
ODD Behaviour: However if I came to the search activity through the VIEW, I invoke a browser activity and call finish() on the search activity. Now I have the browser in my view. If I now go back I would expect to go back to teh device home page. But from now where the "main activity" is showing up.
I see in the logcat a message from ActivityManager indicating
moveTaskToBack: 8
I have tried various flags to invoke the browser activity the tried flags include new task previous is top and I have also tried both a singleTop and otherwise with the SearchActivity as well. Same end result.
View 2 Replies
View Related
Mar 18, 2010
1. I want to know the behavior of activity for the cases where onStop and on Destroy were not called like low memory situations.
2. I was registered my handler in on Create() and unregistering in on Destroy, what is the behavior if other thread sends messages to the registrants after the activity was killed by android without calling on Destroy. I know that those handler were not removed by GC as they are still referring by the thread.
3. Also suggest me to handle the above situations.
View 3 Replies
View Related
Sep 20, 2010
I have a ListView set up in single-choice mode like this:
<ListView android:id="@id/android:list"android:layout_width="fill_parent"
android:layout_height="fill_parent" android:background="#ff444444" android:layout_weight="1"
android:drawSelectorOnTop="false" android:choiceMode="singleChoice" android:scrollbars="vertical"
android:headerDividersEnabled="true"/>
When I press my finger on a choice, the selection changes from white text on light gray to black text on orange. But as soon as I lift my finger, the selection reverts to the original state. I'd like that chosen row to remain in the black-text-on-orange mode when I lift my finger so that the user knows what was selected in the list (my onClickListener has captured the selected row, of course). Is there a way I can tell the ListView that I want this behavior or something similar so the user knows what item has been selected?
View 6 Replies
View Related
Oct 18, 2010
I have a TextView which is inside a LinearLayout which is in the child position of an ExpandableListView. Without assigning a color state selector to the text view, the following behavior is observed:Text unselected - text paints as white Text selected - text paints as black.If I add a color state selector with a call to text.setTextColor(R.color.textcolorstatelist) then the following behavior is observed:Text unselected - text paints as black Text selected - text paints as black.I tried two versions of textcolorstatelist.xml and both produced the results above.
View 9 Replies
View Related
Sep 30, 2010
I am using a handler inside my service to display notifications at a certain time using the Handler.postDelayed method. My application runs fine on the emulator just as expected satisfying all cases. But when I installed the same on my HTC Wildfire, it simply doesn't happen as anticipated. Notifications are displayed at a random manner after the scheduled time and some notifications even fail. I'm monitoring my service from the Applications > Running Services and still my service is active.
View 1 Replies
View Related
Mar 16, 2009
I am trying to add ringtones to the media/ringtones folder from my application. If the phone is connected via USB to a computer or mounted on my Mac, the ringtones do not show up in the SD Card, nor in the Ringtone settings.
But if I run the application with the USB unplugged, the ringtones appear ok. This is not a problem with Ringdroid which does the same thing.
View 2 Replies
View Related
Jul 10, 2010
I got two kind of lists on 4 different views. All lists are clickable and starts an activity to read the clicked record. One is just a listview populated from the DB and works fine. The second is also a listview populated from a DB but has a addHeaderView. This makes the list forget where it was when you return from the listview's intent. If I remove the addHeaderView(); it works fine. Why does AddHeaderView changes or even malfunctions ListView's behavior?
View 2 Replies
View Related
Jul 13, 2009
I changed my database schema on my application to include an additional column in one of the tables. I did this in the onUpgrade method in the DBHelper.
Then I tried exporting my signed application and reinstalling it using the 'adb install -r <app>.apk' command to try and 'simulate' an application upgrade, but onUpgrade never gets called.
Is there a command that I can use to try and duplicate the behavior of an application upgrade?
View 3 Replies
View Related
Oct 1, 2010
I have an audio player toolbar activity that has a corresponding layout file.
I need this player to show up at the bottom of another activity. I use a ViewStub and inflate the audio toolbar's layout file in the stub.
How do I access the buttons, etc on this inflated view and how do I set their behavior?
The docs on ViewStub did not mention anything about this (or maybe I totally overlooked something).
View 1 Replies
View Related
Oct 1, 2009
I'm looking around and trying to find out where sleep behavior is documented - and I mean in the general sense.
When the phone is left alone: * Sometimes the phone screen dims and doesn't shut off. * Sometimes the phone screen goes dark in five seconds * Sometimes the menu lock happens. * Sometimes the menu lock doesn't happen. * Sometimes the only way to darken the screen is to push the power button.
What's not clear is what triggers these different states. I'm looking for a complete list I can use in testing and application validation.
View 6 Replies
View Related
Jun 7, 2010
I wrote an app that invokes the contact manager in the following way: Intent pickcontact = new Intent(Intent.ACTION_PICK, People.CONTENT_URI); startActivityForResult(pickcontact, CONTACTPICKED); I am experiencing 2 different behavior between HTC phones and the NexusOne, all with firmware 2.1-update1. (i.e., my application is getting access to all my contact along the primary phone number of that contact list). On HTC phones however (incredible and the hero), the list of contact I get represents some sort of index as opposed to the actual contact name/phone number.
View 4 Replies
View Related
Mar 31, 2010
I have an app with two activities, one of which the launchmode is set to "singleTask". From the Android dev guide, I got the impression that my SingleTaskActivity should start a new task (or reuse an old task) and always sit at the root of the stack when launched.
However, it's inconsistent with the behavior of the app if I follow the steps below: - launch StandardActivity from home - click the "home" key - launch SingleTaskActivity from home, you will see it's in the foreground as expected - click the "Back" key, StandardActivity comes to the foreground whereas I expect to see the home screen because SingleTaskActivity is supposed to be at the ROOT of the stack. It appears SingleTaskActivity was launched into the task that StandardActivity started, rather than starting its own task.
Is my understanding about the "singleTask" launch mode correct?
=== The Android Dev guide (http://developer.android.com/guide/topics/ manifest/activity-element.html#lmode) says:
In contrast, "singleTask" and "singleInstance" activities can only begin a task. They are always at the root of the activity stack. Moreover, the device can hold only one instance of the activity at a time — only one such task.
CODE:.....................
View 5 Replies
View Related
Sep 28, 2010
I have noticed that loading an image into a GLTexture using
CODE:........
Will create a texture with premultiplied alpha. Not a problem, as long as I use glBlendFunc(GL_ONE, GL_ONE_MINUS_SRC_ALPHA) to blend instead of glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA) which will cause dark borders.
However, I've found that if I render text onto the Bitmap and convert to glTexture using:
CODE:........
The resultant texture is NOT premultiplied, and using glBlendFunc(GL_ONE, GL_ONE_MINUS_SRC_ALPHA) will cause ugly over- saturated edges when blended into the 3D world. Blending using glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA) makes it look right again.
To confirm this, I saved the bitmap into a PNG file and load it as a resource into a texture, and the resultant texture is premultiplied and renders correctly using glBlendFunc(GL_ONE, GL_ONE_MINUS_SRC_ALPHA)
Is there a way to force the text rendering onto the bitmap to be pre- multiplied?
View 2 Replies
View Related
Jun 4, 2009
I noticed that the imeOptions attribute on TextViews behaves inconsistently across different devices. For instance, setting imeOptions to "normal" has the following effects:
1) On the emulator and G1s running 1.5: The OSK will have a "Done" key and clicking it will simply close the OSK with no further action taken (this is exactly what I need)
2) On my HTC Magic (G2), also running 1.5 (of course): The OSK will have an enter key (showing the enter symbol instead of "Done") and when clicking it, the OSK will close and bring up the context menu of the text view... I mean, seriously. That is the last thing any user or developer would expect it to do.
There seems to be no way to simply close the OSK after entering some text on the G2, *except* when specifying flagNoEnterAction in imeOptions, which on the G2 does what "normal" does on the G1, but on the G1, this will lead to the OSK to not respond at all to the enter key (user has to hit "back" to close the OSK).
This is a complete mess, is there any way to have the OSK behave in a sane manner without resorting to hacks (like checking for device models and setting imeOptions programmatically)? Didn't Google say they cared about backwards compatibility before releasing Cupcake? I have nothing but trouble getting my app to look and behave identical on different Android models.
View 4 Replies
View Related
Aug 12, 2009
In my app, a user picks video content with Intent i = new Intent(Intent.ACTION_GET_CONTENT); Code...
Why is the behavior for video and audio different?
View 3 Replies
View Related
