Android :: Color Spinner List Items
Jun 5, 2009
I am trying to change the text color of the spinner list items individually. I would like to be able to color the top three texts black and then the bottom four grey. This way the last items look disabled, but I still want to be able to capture the event when they are chosen. I haven't been able to find any documentation on how to do that. Alternatively I would like to disable som list items, but still be able to capture the event when they are chosen.
View 5 Replies
Jan 25, 2010
I have a spinner widget in my activity which lets users pick a list name.
Normally, the function of the spinner is to switch between lists but for a couple of instances, I swap out the selection change listener to perform a different function with the same list of options. Once the selection has been made, the old listener is restored and life goes on.
This is a bad and buggy arrangement. Instead, I would like to have a function that just takes a selection listener and some other parameters and shows a popup list that's populated by the same cursor (or and identical cursor) as the spinner, without using the spinner itself.
Is there any way I can do this?
View 1 Replies
View Related
Apr 21, 2010
Spinner with checkbox items, is it possible?
View 2 Replies
View Related
Oct 6, 2009
How can I create Spinner with customized items? Normally it is possible to have spinner items with text and checkboxes on the right, but I would like to have one part of the item's text black and the second part gray. I tried to create custom ArrayAdapter for the Spinner but I just can't figure out how to do it.
View 5 Replies
View Related
Aug 17, 2010
I am implemented to kids application I am implemented spinner in added array category list these are array text list now I am implement these text array list replace in drawable images in spinner how can implemented:
personalinformation = (Spinner) findViewById(R.id.SpinnerCategory);
ArrayAdapter<?> adapterDefaultpersonal = ArrayAdapter.createFromResource(Animals.this,R.array.Animalinformation,
android.R.layout.simple_spinner_item);
adapterDefaultpersonal.setDropDownViewResource(android.R.layout.simple_spinner_dropdown_item);
personalinformation.setAdapter(adapterDefaultpersonal);
personalinformation.setSelection( getSharedPreferences("", 0).getInt("SpinnerSelection", 0));
personalinformation.setOnItemSelectedListener(new OnItemSelectedListener()
{ public void onItemSelected(AdapterView<?> parent,View v,int position,long id) {
if(position==0) { } } );
This is the spinner code I am using array of text list these text replaced to drawable items in to spinner how can implemented some solution I am new in android.
View 1 Replies
View Related
Jan 29, 2010
How to add items to the spinner dynamically in android?
View 1 Replies
View Related
Jun 13, 2010
I have an android spinner that's populated by a list of strings using an ArrayAdapter and it operates fine, however because of the way the spinner is displayed I'm running into a display height problem with the list items.
At first glance it would seem that the ArrayAdapter can use a single layout for displaying options which leads to the problem I'm having. When displaying the current item in the spinner (when the user is not selecting a new item from the list) the spinner pads the text so that the spinner is a reasonable size for clicking on. However when the user taps on it and brings up the list to select a new item, the list items presented are way to small height-wise. If I use an item layout that presents the list items at a reasonable height, then the spinner itself becomes exorbitantly huge due to it's own padding of the list item.
Any ideas on how I can manage the height of these two item display modes so that effectively they display with the same height value instead of the spinner height being larger than the list item display height?
View 1 Replies
View Related
Jan 28, 2010
How can I display a particular array of items from a database (SQLServer) in a Spinner of Android?
View 2 Replies
View Related
Sep 29, 2009
I am trying to change the items in a list view based on a value that gets selected in a spinner that is in the same activity. Is there a quick way to do filtering on the list adapter data based on that value, or should I go the long way of changing my adapter implementation for easy filtering?
View 2 Replies
View Related
Feb 2, 2010
I'm pretty new to Android dev and still working out a lot of things.I've got a main menu showing using the following code, but can't work out how to disable selected items in the menu. Can anybody help me with some sample code?
View 2 Replies
View Related
Sep 15, 2010
How to apply color in spinner widgets
View 1 Replies
View Related
Sep 7, 2009
How to change the color of a Spinner when mouse over it.
View 5 Replies
View Related
Mar 22, 2010
I'm try to change text color and align item in spinner to center of it how can I do this
here is my code
String[] li={"1","2","3"};
final Spinner combo = (Spinner)findViewById(R.id.widget30);
ArrayAdapter<String> a = new ArrayAdapter<String>(this,android.R.layout.simple_spinner_item, li);
combo.setAdapter(a);
View 1 Replies
View Related
Jun 20, 2010
I have customised the spinner items background into black color.But border around spinner and the separartor between each spinner item is in white color. I want to change separator color and border to dark gray color.
How can i change these color? Is spinner uses list view or some other as parent to populate items in spinner?
If so can i change the separator background of parent view?
View 1 Replies
View Related
Feb 7, 2010
How can I change background color of ListView items on a pair-item basis. When I use android:backgroundColor in the ListView item layout I can achieve this, however the list selector is no longer visible. I can make the selector visible again by setting drawSelectorOnTop to true but then the selector overlays the whole item.
Any ideas how to change those background colors and keep the selector?
I would rather not change the selector itself.
Authors of GMail application have managed to achieve exactly this so it's definitely possible.
View 5 Replies
View Related
Nov 20, 2010
I have a list View in my app (this is the xml layout):
CODE:.............
Each item of my list View is composed of two TextView:
CODE:.............
I would like to change background color (and text color) of each item of my ListView on focus (and, if possibile on selection). How can i do it?
View 6 Replies
View Related
Nov 22, 2010
I have a list View in my app (this is the xml layout):
CODE:.............
Each item of my list View is composed of two TextView:
CODE:..............
I'm populating my listView from an ArrayAdapter, in this way:
CODE:..............
My goal is to be able to change the text color and the backgorund of these child views whenever the parent is selected or pressed.
View 2 Replies
View Related
Oct 17, 2010
To give the user of my app an indication which field currently has the focus I am trying to change the background color of some of my fields depending on the current state, however, I am having troubles understanding Androids Color State List Resources:
There is this example at the bottom of http://developer.android.com/guide/topics/resources/color-list-resource.html. If I try exactly the same, i.e. if I want to adapt the textColor , things do work. However, if I try an only slightly different thing, namely to adapt the background color, things do not work and I don't understand why? Why is this so inconsistent?
To make it simpler to understand what I am trying to do, I append my misc. .xml files:
The AndroidManifest.xml file:
CODE:.........
If I run this as shown here, it works, i.e. I get a button whose text color changes depending on whether the button is focuses, pressed, etc.
If I uncomment the lower button, where I just flipped the attribute values for textColor and background I get an exception, stating
... <item> tag requires a 'drawable' attribute or child tag defining a drawable
What the heck am I missing here? Why is that color state list acceptable as a text color but not as a background color? How does one specify a view's background color depending on the view's state?
View 1 Replies
View Related
Oct 11, 2009
Is it possible to set the width of a spinner dropdown list in code? I have a spinner populated with integers, and it does not look good with the list expanding to full width. Can I set the width to wrap the content somehow?
View 1 Replies
View Related
Sep 24, 2010
I am writing my first simple Android App: It loads temperature samples from a Java based measurement system (CSV via HTTP), shows the available channels in a Spinner and when a channel is selected, it shows the corresponding value and a timestamp in two TextViews. The App works fine, except a little cosmetic problem: The items in the drop-down list are separated by a horizontal line (divider) and depending on the scroll position, some lines disappear and appear again, when I scroll some more pixels up or down. The phenomenon happens on the emulator screen as well as on the handheld display (HTC Wildfire). Seems to be a screen resultion problem. Does anyone have a hint how to avoid this?
See my code below...
CODE:.................................
View 2 Replies
View Related
Jan 26, 2010
How can I use code to set a default item in a spinner drop down list
View 4 Replies
View Related
May 31, 2010
I have a list where i basically need a hierarchy of items. Any children of an item would be padded slightly, as to easily distinguish their parent item. How could this be achieved? Note that i could, if needed, make each parent show no children, and then when the parent is clicked, a new list containing all of it's children is loaded. This however requires more clicking to display information than i would prefer. Also, the items themselves will contain graphics and whatnot (to show a drag'n'drop button, etc), so it would be best if it visually appeared as if the item itself had a margin, rather than the contents of the item being padded.
View 1 Replies
View Related
Aug 7, 2009
In Android, I want to present the user with a list. When an item on the list is selected some action is performed, and this list item is no longer selectable. It is also 'grayed out' or the like to indicate that it cannot be selected the next time the list is displayed. I have seen the isSelectable() override in Adapter, but I believe this causes the item to be treated as a separator, which causes visual problems. And I have not found a way to 'gray out' an item.
View 4 Replies
View Related
Sep 2, 2009
I am wondering is there any way to create something similar to spinner but which allows multiple selection. I guess we can select multiple entries from ListView but I don't have much space to show all the entires and also I need to show three different categories on the same Activity which you can select from.
Here is what I want to do:
Category 1:
Category 2:
Category 3:
View 2 Replies
View Related
Sep 16, 2010
Is there a way to replace the standard ListView that pops up when opening a Spinner with a custom one?
I would like for my Spinner list to be Filterable (and/or even possibly have two tabs with different lists the user could select options from). Is this achievable or do I have to do my own implementation alltogether?
View 1 Replies
View Related
Jan 12, 2010
I have a list view and an adapter that sets alternating background colors to the list items ("zebra" list style):
public View getView(final int position, View convertView, ViewGroup parent) {
int colorPos = position % colors.length;
...
convertView.setBackgroundColor(colors[colorPos]);
return convertView;}
But now, when i select an item using scroll wheel, or when I click an item, the original colors for selecting/clicking do not override my custom backgrounds (I can see the original color below the one I set).
How can I set the original colors for these states?
View 2 Replies
View Related
Apr 27, 2010
I cannot find any example of a widget showing a scrollable list of items (e.g. text) since the widget api says there is no listview, no scrollview etc.. at all, how to implement a scrollable list inside a widget?
For example a list like friends-stream from HTC shows or many other widgets around.... do i have to code my own list-implementation for a widget.
View 9 Replies
View Related
Dec 16, 2009
The way I want it is, per row there will be a text and is followed by a right arrow button, so that the user can click on that button to edit the content of that row. If the user is using the keypad, by using the left and right buttons on the keypad, he should be able to select the textview or the Button in that particular row. I have seen this in a couple of apps. The way I see that working on those apps appear as if they are maintaining two lists in parallel.
The reason i felt it this way is, if I am on row 1 of the list and if I press the right key on the phone keypad, then the right arrow button will get highlighted and now if I use the down key or if I keep pressing the down key, then the focus will scroll through that arrow button only as if that is an another parallel list constructed. I don't know if that is a good way to do it. I tried many for getting this to work, but couldn't succeed.
View 4 Replies
View Related
Sep 2, 2010
I have a listview from an SQLDatabase using custom CursorAdaptor. I would like to go back to the activity that I used to create the items when I click on them in the listview. So that I can edit the entries. But nothing happen when I implement the OnItemClick method and the getItemId() on the CursorAdapter even though am not sure I am correct there. Here is my Code:
public void onItemClick(AdapterView<?> adapview, View view, int position, long rowId) {
Cursor c = adapter.retrieveRow(rowId); // retrieve row from Database
Intent edit = new Intent(this,NewItem.class);
edit.putExtra(DBAdapter.KEY_ID, rowId);
edit.putExtra(DBAdapter.Title, c.getString(c.getColumnIndex(DBAdapter.Title)));
edit.putExtra(DBAdapter.DATE, c.getString(c.getColumnIndex(DBAdapter.DATE)));
startActivity(edit); } public long getItemId(int id){ return id; }
View 1 Replies
View Related
Oct 16, 2010
I've got the following main.xml:
<?xml version="1.0" encoding="utf-8"?> <AbsoluteLayout
android:id="@+id/widget0" android:layout_width="fill_parent"
android:layout_height="fill_parent" xmlns:android="http://schemas.android.com/apk/res/android" >
<ListView android:id="@+id/listview" android:layout_width="315px"
android:layout_height="379px" android:layout_x="2px" android:layout_y="50px" >
</ListView> <TextView android:id="@+id/title" android:layout_width="wrap_content"
android:layout_height="wrap_content" android:text="Select device:" android:textSize="17sp"
android:layout_x="-2px" android:layout_y="1px" >
</TextView> <Button android:id="@+id/refresh" android:layout_width="109px"
android:layout_height="wrap_content" android:text="Refresh" android:layout_x="209px android:layout_y="7px" >
</Button> </AbsoluteLayout>
The main class does nothing but drawing the layout. I've got the following class and layout for the listitems:
<?xml version="1.0" encoding="utf-8"?>
<TextView xmlns:android="http://schemas.android.com/apk/res/android"
android:layout_width="fill_parent" android:layout_height="fill_parent"
android:padding="10dp" android:textSize="16sp" >
</TextView> package com.android.bluetoothp2p;
import android.app.ListActivity; import android.os.Bundle;
import android.view.View; import android.widget.AdapterView;
import android.widget.AdapterView.OnItemClickListener; import android.widget.ArrayAdapter;
import android.widget.ListView; import android.widget.TextView;
import android.widget.Toast;
public class BTListView extends ListActivity {
@Override public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState); setListAdapter(new ArrayAdapter<String>(this, R.layout.list_item, COUNTRIES)); ListView lv = getListView();
lv.setTextFilterEnabled(true); lv.setOnItemClickListener(new OnItemClickListener() {
public void onItemClick(AdapterView<?> parent, View view, int position, long id) {
// When clicked, show a toast with the TextView text
Toast.makeText(getApplicationContext(), ((TextView) view).getText(),
Toast.LENGTH_SHORT).show(); } } ); }
Countries is just an array with a list of countries, some dummy values. Now, how do I make the list items of the BTListView class go in the ListView (with @+id/listview) of the main class? Now my list works, but it isn't clickable anymore. This is the code:
ListView lv = getListView(); lv.setTextFilterEnabled(true);
lv.setOnItemClickListener(new OnItemClickListener() {
public void onItemClick(AdapterView<?> parent, View view, int position, long id) {
// When clicked, show a toast with the TextView text
Toast.makeText(getApplicationContext(), "lolwat", Toast.LENGTH_SHORT).show();
} } );
View 1 Replies
View Related
