I intend to use the Android Emulator to send/receive SMS. I send SMS to the emulator using the sms send command. I'm aware of emulators being able to converse with each other over SMS but would it possible to receive that the SMS reply sent from an Android Emulator on a external TCP port?
View 1 Replies
Have a server-socket running in an android application, which I debug using the emulator. Using the emulators console and "redir add tcp:8888:8888" I can make the service available to a program running on my development machine (as localhost:8888).
The redir port is however not available on any other network interface, meaning I can't access it through the host-ip on either the local development machine, or from a secondary machine on the network. Anyone know if its possible to make the emulator bind to all network interfaces, or have some other trick to enable other hosts on the network to connect to the emulator?
I just published my first application to the market, but I just found out that android.telephony.gsm.smsmanager was depreciated as of Android 1.6. My application depends on sending SMS messages, so it cannot not work in 1.6 or newer. I built the project against 1.5, but I only have a device with 1.5 to test on. Since I built on 1.5, am I fine in terms of newer OSes, or will users get force closes? Is there a way to send/receive SMS messages in the emulator?
View 1 Replies View RelatedI have a service in an APK which starts a Thread which has the following in it's run method; Code...
But the receiver doesn't receive the broadcast when I run it in the emulator (or at least the log message doesn't get received). Any hints?
The views expressed in this email are those of the author and not necessarily those of Funky Android Limited, it's associates, or it's subsidiaries.
I created a sqlite database to store playlists for a media player I am developing because of extended feature (rather than using the Content Provider). It works perfectly on the 1.6 emulator but FCs on anything higher than 2.0... what has changed that I need to know about as far as opening databases in SDK 2.0+? Here is the logcat.
CODE:.............
Here is the dbhelper class
CODE:................
why can't stackoverflow just use tags like a normal syntax highlighter.
Unable to play youtube videos on SDK 1.5 emulator - but playing well on SDK 1.0 emulator. Can you update the source....
View 7 Replies View RelatedFinally strace gave me this:
CODE:................
And several other attempts to call "link" that also fail (sshfs does not support hard links).
Is it possible to change the emulator's behavior to create lock files somewhere in /tmp (using some hash of image path as lock file name)? I am OK to try this myself: which repositories from https://android.git.kernel.org/ are necessary to rebuild the emulator alone, and where in the sources is the code responsible for image locks?
I need to run several emulator instances to test my application. When i try to run instances using emulator -data <path> option, the emulator crashes.
I got a MS Visual Studio window informing that emulator throws a "unhandled win32 exception".
The exception message in the debugger (MS Visual Studio 2008) is: "Unhandled exception at 0x77c4706c in emulator.exe: 0xC0000005: Access violation reading location 0x03216848"
The emulator runs normally without "-data" option.
I am getting the following error when I try running my program in the emulator:
emulator: ERROR: the user data image is used by another emulator. aborting`
Is there a way to reload an Android application in the emulator without closing the emulator, saving any code changes, and running the emulator again? If I make even a simple change to the layout, it takes about 30 seconds by time I run it in Eclipse and Android "boots", and I can unlock the emulator to run the application. Is there any way to shorten this time when making changes, or is it something I just have to deal with?
View 3 Replies View RelatedI downloaded the most recent version of Android for linux (android-sdk_r05-linux_86.tgz). I was trying to use the the Android Ant task(s) for packaging, building, and deploying my code. I should mention that I'm running AMD64, but have the 32-bit libraries installed. The Android Ant tasks are all broken.
First, the start-emulator task never gets the emulator running. It does get past starting adb, but then just sits there.
Second, the SDK is missing the aapt binary in the tools directory. So, the example notepad sample application will not even package correctly.
I have all the dependencies configured for Android. I can run it from the command line just fine.I assume the Ant code is out of sync with the recent SDK updates. Can anyone shed some light on this problem? At this point, I'm considering writing my own Python scripts to interact with the Android SDK. Ugh.
In my dummy application i want to send MMS. But i don't know how to check it.I know that we can send SMS from one emulator to another but, is it possible for MMS? If yes then how it can be done.
View 3 Replies View RelatedIs it possible to receive SMS on a specific port on my HTC Desire? My development environment:Android 2.1
This is the configuration of my Receive program AndroidManifest.xml: Code...
I used the NOWSMS tool to send a SMS message with a port, but my program not work. Can anyone help me?
What happens to messages sent to a device via a port directed SMS? They are not *visibly* picked up by the phone, and do not broadcast an intent - so they seem to disappear into the ether. Is there some way to receive a port directed SMS or are they discarded? I believe the message is being sent with the following header structure: 06 // UDH length 05 // 16bit port addressing 04 // 4 bytes follow 23 F5 // Destination port 00 00 // Source port.
View 2 Replies View RelatedIs it possible to receive a binary SMS on a specific port?
I am currently receiving SMS via Action: "android.provider.Telephony.SMS_RECEIVED" from a BroadcastReceiver.
But i have no luck with binary SMS. I only get notified for text messages.
I am developing an Application for SMS.
1. Can i have only my own notification in status bar not native android one while receiving a SMS? Currently it is showing both. I think if i would disable the notification then it could also disable my one too.
OR
2. Can i receive my sms at any custom port? If yes then how and while receiving that would i see the native notification in status bar?
I know root is new for the eris but what do you guys perfer. The one cost 3.99 in the market and the other is free. Is there a difference?
View 2 Replies View RelatedIs there an MS-DOS emulator for android 2.0? If not, will there ever be?
View 15 Replies View RelatedI have a GPS app that gets the GPS fixes and prints it in the ADB logs. The app was working fine with 1.1 SDK. WIth 1.5 SDK emulator I see that the app does not receive any location updates after receiveing the 1st location. I have LocationListener as well as GPSStatusListener aded to my code and none of the listeners gets called. SO my app kind of waits forever for the next location or an error. 05-21 23:27:35.554: ERROR/fta_gps(740): gpsTest.java: 438:onGpsStatusChanged, event 3 05-21 23:27:36.564: INFO/fta_gps(740): gpsTest.java: 294:onLocationChanged 05-21 23:27:36.583: INFO/fta_gps(740): gpsTest.java:581:TimeStamp is: Dec 31, Wed 05-21 23:27:36.593: INFO/fta_gps(740): gpsTest.java:551:DateStamp is: 11:59:59pm 1969 05-21 23:27:36.724: INFO/fta_gps(740): gpsTest.java:359:Location changed : Latitude: 38.99941 Longitude: -77.08595 Altitude: 0.0 Speed: 0.0
View 2 Replies View Relatedafter downloading the new Android 2.2 SDK I tested some of my more CPU- intensive code with the integrated emulator, hoping to see some of the promised performance improvements also in the emulator. But to my disappointment the apps run just as fast/slow as with Android 2.1. Did I miss something? Is the JIT not activated or integrated in the emulator of the SDK 2.2?
View 3 Replies View RelatedI'm pretty happy with the performance of the PSX emulator on my new Captivate. But why is there no N64? It seems like the natural progression of things. As much as I like FFVII on the Android, I would like it even more if I could play Ocarina of Time too.
View 1 Replies View RelatedI want to develop an android application without having to purchase an android phone,
1) Is there an android emulator on the mac? the same as on windows?
2) is it better to develop on an android app on a pc, or a mac? same?
How do i run the emulator?
View 3 Replies View Relatedwhen more than one emulator is running i can't use adb command. If I have only one emulator and type "adb logcat" it works fine but if more than one is running it not runs. so I want to know what is the command for the same..
View 3 Replies View RelatedIs not possible to use a cellular card on a laptop that runs the emulator to access the Internet? if the emulator can access the network if the laptop is using wi-fi or cables I am assuming it can still do the same regardless of what technology is used to connect the laptop to the network correct?
View 2 Replies View RelatedIs it possible to run the emulator without GUI showing? I want to continually run test of my app on server that does not allow opening GUI.
View 2 Replies View RelatedHow to know if the application is running on emulator or on a real device? I want to implement a function to detect wifi connection. If the application is running on emulator, just skip the wifi detection, while on real device, the wifi connection check should be done. how to do that?
View 11 Replies View RelatedI would like to have my code run slightly differently when running on the emulator than when running on a device. (For example, using 10.0.2.2 instead of a public URL to run against a development server automatically.) What is the best way to detect when an Android application is running in the emulator?
View 9 Replies View RelatedI am working with eclips with the new SDK2.2. i cannot find the sdcard in emulator 2.2!
View 8 Replies View Related<uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"/> 2009/9/22 Evgeny V <evgen...@gmail.com>:
View 2 Replies View Related