I just rooted my brand new TD Hongmi,when i reboot to recovery and try to install the trwp .zip file i get the following message
Error: Partition table not match Installation aborted.
This message occurs when i try to flash anything from the stock recovery..I cannot flash the recovery .img file through moble uncle either, after flashing and rebooting to recovery, the stock recovery loads.
View 1 Replies
I'm trying to flash the staging partition on my TF300T. The device is unlocked and I have previously successfully flashed ClockworkMod Recovery to the recovery kernel.
However, I'm trying to flash ArchLinux ([URL]...) to the staging partition and it. will. not. flash.
Well actually, it says it's successfully flashed, but "fastboot reboot" hangs forever (until I manually turn off the device) and when it starts, it just goes back into normal Android. I've even tried flashing the boot partition, but still nothing. While in ClockworkMod Recovery I used ADB to dd the image straight onto the staging partition (mmcblk0p4) but to no avail.
It seems like no matter what I do, it keeps just booting straight into Android, even after "successfully" flashing with fastboot and dd'ing the image onto the correct partition (verified by viewing /etc/recovery.fstab).
How can i permanently store custom ringtones on root/system partition? if i store custom ringtones on internal or external sd, profiles are messed up every time i connect my phone in mass storage mode.
View 1 Replies View RelatedI am running rooted stock Android 2.3 on LG E405 (no working 4.x ROMs exist for the device)
I have two questions:
1) What is the shell command to manually make android allow the PC to mount androids' (internal) partition as USB-drive? (I cannot think of right keywords to google this one up - )
2) How does android determine which partition is which (i.e. which one to remount for the PC when connecting in "USB storage" mode), beside vold.fstab and init.rc? On android 2.3 that info is not in "framework-res.apk", so where is it? In the partition table itself?
I had switched data partition with internal sdcard partition.
Here's how: Phone had a very small "/data" partition on /dev/block/mmcblk0p21 and large internal "/sdcard" partition on mmcblk0p20
So I reformatted mmcblk0p20 (ex-sdcard partition) into EXT4 and mmcblk0p21 (ex-data partition) into FAT32
Then I changed init.rc to mount mmcblk0p20 as /data type EXT4 and mmcblk0p21 as /sdcard type VFAT (mounting /sdcard was commented out in stock init.rc for some reason). This required modifying my boot image.
I have also set correct partition number in vold.fstab:
[#]dev_mount sdcard /mnt/sdcard auto /devices/platform/msm_sdcc.3/mmc_host[/#]
So basicly I now have a large /data partition and small internal /sdcard. I'm able install up to a gigabyte of APKs and it works fine.
However, when I connect to my PC via USB into "USB Storage" mode, the phone seems to still try to unmount what was previously sdcard partition (/dev/block/mmcblk0p20), instead of what is NOW an sdcard partition (/dev/block/mmcblk0p21) I can still send files to the phone via wi-fi and ADB, but the ability to mount it directly would be nice.
If I accidentally select "erase internal sdcard" from storage menu, that will also most likely erase what is now my /data partition, softbricking the phone. The "factory reset" option will probably only corrupt the sdcard.
I'm have been trying to create a second partition on my sd card using miniTool Partition Wizard.But in the end I never get a 2nd partition but just a smaller first one.My approach is as follows:
insert empty SD card (FAT32, 4GB)
open miniTool Partition Wizard
right click on SD card - "Move/Resize"
choose 1gb for unallocated space after - click ok
right click on 2nd partition and choose "create"
create 2nd partition with FAT32/Ext2/Ext3 (tried all options already) and "primary" and Cluster 4KB - click ok
Apply
Afterwards my SD card is still shown as one partition, but this has just 1gb less capacity then before.Neither the Wizard nor the phone detects the 2nd partition then.
I can't figure what is exactly meaning the Partition Sdcard values in CWM.
I have an i9000, with 8Gb of flash. Some are system reserved. Available is around 6Gb.
When i run CWM, i can partition my sdcard, but i don't see what means the possible values (for 256 to 4096).
This is obviously not ruling the space left on /sdcard mountpoint (i partition to 2048, i still have nearly 6Gb available)... So what exactly means partition sdcard from CWM ??
i can't find an answer, and i dislike, when flashing rom, following commands i don't really master (generally a partition SD 2048 / SWAP 256 or SWAP 0).
I have bought a cheap chinese phone that had a 4g rom. 512mb is mapped to data as p3 and p4 is mapped to internal storage which is 2g.
I have managed to work out how to delete partition4 and extend partition3 as they follow on from each other.
However how do I remove all links to it in the system as it still tries to mount it on boot even though it isn't there.
I have removed the line from vold.fstab and that just crashed the external and internal sdcards and the storage section inside the system settings.
I'm stuck on the android on skateboards after I partitioned and flashed apps2sd. Any resolutions other than wiping? Evil eris 2.0.1
View 5 Replies View RelatedIs there an equivalent view structure to the iPhone default table cell? The default table cell formats an image (icon) and text in a nice looking way. Are there suggested equivalents for Android? Is there a sample somewhere?
I want to create say 5 different types of cells in table along with identifiers and load them appropriately as per the given data depending upon the type?
Creating TableRow inside TableLayout seems to be one of the options but how to dynamically create the tableRows depending upon the type?
Here is my screen description: It is a TableLayout and it contains multiple Rows. I have set TableRow as clickable, as I want to go to next screen on click of a tableRow. Everything I am doing through Java programming (instead of XML layout, because number of TableRows changes each time) On next screen, I wanted to display all the views of that particular clicked TableRow. Here the problem i am facing is how to capture particular tableRow on onclick() even and how do I get all the textviews of that particular Row. I tried to set id at runtime, and tried to get id of view, but it's not working, giving error resourcenotfoundexception.
View 2 Replies View RelatedThe table "credentials" does show up in the adb shell.
I've checked logcat and it doesn't seem to report a problem...
CODE:........
I've been pouring over this and I bet its some silly syntax typo! Or, at least I hope it is something trivial.
I have a table layout with a few predefined rows in it. Each row has only two columns.
Now I need to dynamically add additional rows in it.
I have two problems:
1) When programmatically inflating, I cannot set the index of the newly created row (I want it in place 'n') 2) After inflation, the inserted (actually appended) row doesn't listen to parent table's stretch column property.
So here are my questions:
q1) Can I set the place where to insert the inflated row programatically ?
q2) Why doesn't the new row inflate properly (the second column is not shown because the first column doesn't contains a TextView with fill_parent.
In the end I need the first column to occupy 80% of the screen width, and the second column remaining 20%.
q3) is that doable with programmatic row insertions ?
When a button is clicked, the following method is run:
public void createTableRow(View v) {
TableLayout tl = (TableLayout) findViewById(R.id.spreadsheet);
TableRow tr = new TableRow(this);
LayoutParams lp = new LayoutParams(LayoutParams.FILL_PARENT, LayoutParams.WRAP_CONTENT);
tr.setLayoutParams(lp);
TextView tvLeft = new TextView(this);
tvLeft.setLayoutParams(lp);......................
R.id.spreadsheet is an xml TableLayout. I can see from debugging that the method is being accessed, but nothing is drawn to the screen. What gives? Do I need to reset the Content View somehow?
I can login to Gmail.com on any desktop/mobile browser however whenever I try to add a Google Account on my phone, I get this error: Your username and password do not match. (To recover your account information, go to URL.... on your computer.)"
I have tried changing the password but its still the same. I know its not a password issue as I can login to google.com on my desktop and laptop.I also went to this site and tried to add a Google account but it did not work. Tried setting up a different Google ID and it worked right away. So it looks like there has to be some issue with my Google ID.
how it happened as it was working fine until I reset my phone.
I was wondering if there is a way to mix and match animations. For example if you have a "skull and bones" unlock ring and you want the animation to be "the punisher" animation. Seem like there should be a way to put parts of each ring to get a mix. ADR6400L
View 2 Replies View RelatedI have a aftermarket navigation system in my car that includes an adapter to conect other screen in the upper dash. this adapter is to connect to OEM screen of the car but i dont need it.
my idea is to conect a chinese tablet i have here. the tablet is a 7''. the adapter lets me mount the tablet but i wont be able to see all the screen.
Can I resize the screen size to match the adapter opening size?
If I wipe data/factory reset or format sdcard in Clockworkmod Recovery, will it delete the partition that I created on my SD card?
View 1 Replies View Relatedis it possible to use swap on a sd-ext partition? I started to use simple 2ext and I don't know if it's that possible.
View 1 Replies View RelatedAs the title says how do I partition O+8.31z
O+8.31z had a very small internal mem. as we know 165mb
I do got 4gb mem. and I would like to partition it to use as my internal memory. So I could download and install game or an app as I want.
I am trying to create an sd-ext partiton so I can move applications and backup to that partition on my 4GB external SD card.
I've got ROM Manager 4.8.0.8 but when I select Partiton SD card it reboots and tries to reformat but I don't see anything on the Card just a LOST.DIR folder. I can't read the system messages when in Recovery mode cos it all happens so fast.
I tried via ADB and booted into recovery and selected the option to partition manually but still nothing. I reformatted the card with FAT32. Nothing.
I'm using apex launcher, and I'm trying to match my apex wallpaper to the lockscreen wallpaper. But when I go to the lockscreen wallpaper in settings, it only allows me to choose a few OEM wallpapers. How can I get the apex wallpaper onto the lock screen?This is a minor annoyance, but is there a way I can theme the top of my phone where it tells me the time/cell signal to look like stock ICS? The touchwiz icons are really big and don't look that great, while taking up a lot of space.
View 1 Replies View RelatedI need a Flash Player to watch flash videos on HTC Explorer and Samsung Galaxy Ace S5830.Which is the best ? Or should I install a browser ?
View 8 Replies View RelatedHow to create a partition for the micro SD using cwm.?
View 9 Replies View RelatedI am having some issues with my Verizon Samsung Galaxy Tab SCH-i800. So the first issue is i tried to install a stock ROM to fix a corrupted cache partition. Now it tries to boot US Cellular. As of this moment the error i get when i put the device in recovery mode goes as follows:
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/command
# MANUAL MODE #
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/recovery_kernel_log
[code]....
I am wondering if i can just create a new partition on a new SD card? i bought this device on ebay a couple weeks ago and i don't want to continue attempting sketchy leads for fear of hard bricking it. I am very good with performing commands via command prompt if that is necessary, also i have access to an Ubuntu 12.4 computer if that would make things easier? Also as far as i know this is equipped with android Froyo and the issue developed after the previous user attempted to update.
I just took over a second hand chinese android phone which appears to have swap enabled already.
The following is on the phone with SD card installed or removed completely
Terminal Emulator - Free - swap 196604 53036 143568
Diskinfo reports it as zram0 [swap]
The value of swap changes continually, so swap is active.
There is no swapper or any other swap app installed. How do I go about finding out how the phone is configured and if necessary undoing what was done and reconfiguring if necessary ?
I have rooted my xolo a500s IPS using farmaroot but when I tried to mount system r/w for pushing some apps and removing some on system partition but it is not mounting because of that i cant make changes on system.how can I mount system partition
View 9 Replies View Relatedbut is the internal SD in ICS a partition or a directory on the system that pretends to be an SD card?
If it's a partition then I don't really see the benefit over an external SD - except where there is no SD slot. Obviously if it's a directory then it would grow as required...
I've been having a few problems with partitions recently, how do I remove sd card partitions???
Also why is minitool wizard taking so long to write partitions, especially 500 mb?
my verizon galaxy tab 7 (sch-1800) doesn't boot, it freezes on samsung splash. I already restored the stock rom, but it doesn't change anything. if i try to restore default with recovery mode, it says E:failed to mount cache.
View 4 Replies View Related