We are using Hudson to automate our Android build. I need to incorporate the build number into the version string used in our app. Was wondering if anyone had an example of doing that before I (re?)invent that wheel. Obviously I need to replace a string value in one of our config files.
View 1 Replies
anyway I can have my ant build automatically increment the version number in the AndroidManifest.xml file?
View 3 Replies View RelatedAny way to get the version/build number programatically? I dug into Settings source code, it indicated that this info could be read from the file /proc/socinfo, but this file doesn't seem to exists on any of the devices I'm working with?! Wondering where else I might be able to get this info.
View 6 Replies View RelatedI was wondering if it is possible to have Eclipse automatically increment the build version number inside of the Manifest each time that I either build or run an Android app. Has anyone ever done something like this?
View 1 Replies View RelatedEveryone probably has the exact same Build Number, but than again, maybe a couple don't. So after a search, I was not able to find a thread like this, so here it is. I just received my X10 yesterday and per Sony Support, my X10 has the current OS. So here is my info:
Firmware Version: 1.6
Baseband Version: 1.1.32
Kernel Version: 2.6.29-rel
Build Number: R2CA016
Now that I sort of know my way around the SDK/API, I've switched from Eclipse back to my favorite text editor, which means I have to use ant to build my project, however:
It seems every other time I compile the project, a lot of drawables get corrupted, resources lose their ids (resulting in NPEs in the code), or classes throw "Verify Errors".
The only way to fix this is by removing the bin and gen folders, and recompiling, which is obviously annoying.
Is there any way to avoid this?
btw, I'm using ant 1.7.1, java version "1.6.0_20"
I'm trying to setup my build enviroment. I have mint linux 14 64bit. when following the guide on [URL] ....., I seem to be getting errors. the lines it says to use in terminal are
Code:
sudo apt-get install git-core gnupg flex bison gperf build-essential
zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev
libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386
libgl1-mesa-dev g++-multilib mingw32 openjdk-6-jdk tofrodos
python-markdown libxml2-utils xsltproc zlib1g-dev:i386
Here is the printout of result.
Code:
sudo apt-get install git-core gnupg flex bison gperf build-essential
> zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev
> libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386
> libgl1-mesa-dev g++-multilib mingw32 openjdk-6-jdk tofrodos
> python-markdown libxml2-utils xsltproc zlib1g-dev:i386
[Code] ...
I'm trying to build a project in Android 1.5 that references another Android (library) project compiled against Android 1.5 and I keep seeing this error in the Console in Eclipse:
Target 'Android 1.5' does not support building project with libraries.
I'm running Eclipse 3.5, and version 0.9.7 of the ADT.
I followed the instructions here:
http://developer.android.com/guide/developing/eclipse-adt.html
What gives?
I've the latest 1.6 sdk. I would like to build the project on 1.5 as well as on 1.6. New 1.6 also comes with 1.5. My build succeeds, but I get a bunch of error --- Not sure if I screwed the java env setup?
Exception Stack:
CODE:.............
I am trying to build android source code (specifically the applications such as the alarm clock, calendar) and when I do this using eclipse, there are 1000+ errrors being thrown possibly due to mismatch of class path and other environmental settings. Can somebody please help in terms of any said steps to follow for building the application projects under android using eclipse? This is important since I need to debug certain issues and due to failure of compiling I am unable to debug via Eclipse as debug requires an open project compiled successfully to be present. FYI- I have installed the DDMS plugin and ADT successfully and am able to communicate with the target successfully using eclipse, but unfortunately not able to debug due to the above said reasons.
View 4 Replies View Relatedi did repo sync platform/packages/apps/Contacts.git and i received the specific src files for that project now that i modified what i wanted, i want to ubild my changes and patch them to my current Android OS. I tried running make from working directory, but there is no makefile. How would i go about doing so?
View 2 Replies View RelatedI'd like to use CursorAdapter but Cursor its based on cannot be returned by simple sql query, since in db i have two fields and based on some criteria they build the String that would be displayed in the ListView.
what is the best solution: forget CursorAdapter and use ArrayAdapter or MatrixAdapter iterating over my db Cursor and adding rows, or maybe use CursorWrapper or some ither solution?
I'm developing an application that is supposed to run on both Android as well as regular Java SE. I have an eclipse project called foobar-core which contains code that is used both by the Android and the SE version. I have another project called foobar-android, which contains all android-specific code. I need to reference some of the foobar-core code in the foobar-android project, so I added foobar-core to foobar-android in Settings -> Java Build path -> Projects -> Required projects on the build path. This works fine, as I can use code from foobare-core in foobar-android now.
Here's the problem: Both foobar-core and foobar-android are independent git repositories, which means they both have a .git subdirectory. Now I get a lot of warnings on the "Console" tab whenever I compile foobar-android. They look like this:
/foobar-core/src/.git/HEAD conflicts with another file already put at .git/HEAD
/foobar-core/src/.git/config conflicts with another file already put at .git/config
/foobar-core/src/.git/description conflicts with another file already put at > .git/description
/foobar-core/src/.git/hooks/applypatch-msg.sample conflicts with another file already > put at .git/hooks/applypatch-msg.sample
How can I tell Eclipse to ignore the .git files when importing sources from the foobar-core project?
I would like to run a custom shell script upon clicking Build Project in Eclipse. I tried modifying the "compile" section in build.xml, but my script is not getting run. Invoking ant debug on the commandline works, however.
View 3 Replies View RelatedI have a module that builds an app called MyApp.I have another that builds some testcases for that app, called MyAppTests. They both build their own APKs, and they both work fine from within my IDE. I'd like to build them using ant so that I can take advantage of continuous integration.Building the app module works fine. I'm having difficulty getting the Test module to compile and run.I used android create test-project -p MyAppTests -m ../MyApp -n MyAppTests to create the necessary build files to build and run my test project. This seems to work great (once I remove an unnecessary test case that it constructed for me and revert my AndroidManifest.xml to the one I was using before it got replaced by android create), but I have two problems.Any idea what's causing the "Class ref in pre-verified class resolved to unexpected implementation" error?
View 3 Replies View RelatedI would like to build and android project from command line on Linux. In the root directory of the project there are the following files and directories: AndroidManifest.xml build.xml default.properties res/ src/. Can you provide a sample Makefile how to build this project?
View 1 Replies View RelatedI had a project working in Eclipse completely, but after compiling it with ant in order to use Proguard to obfuscate the code the entire project fell apart. The project consists of a single package containing two main activities and 4 helper classes to handle databases and such. After using ant the activities work fine but Eclipse cannot find the helper classes and won't build. Even if I explicitly import the classes the error I get is
The import com.ts.routeTracking.DataHelper cannot be resolved while further mentions of the class get the error DataHelper cannot be resolved to a type. How can I get Eclipse and ant to work together?
Probably a simple question but I've developed an app that has always been using a build target of 1.5 without issue. However, now I'm adding TextToSpeech which was introduced in 1.6. I've created a TextToSpeech wrapper that encapsulates the TextToSpeech code and I have checks in the activity so that when it does run, it should only work for 1.6 devices and above. But the trick is to get the code to run in Eclipse with a build target of 1.5. When I try to do that, of course, I get the following errors tied to my TextToSpeech wrapper class: TextToSpeech cannot be resolved." I've played around with exporting as jar, creating a library project, etc. but I cannot seem to get those to work. For a library project, it says that dependent projects must have the same or higher API level so it won't work. Some relevant code excerpts: Code...
View 3 Replies View Relatedi recently installed eclipse 3.5.2, sdk platform andoid 1.6, api 4 revision 4 and google APIs by google inc. i also set the path for sdk. but everytime i tried clicking the new android project, the build target and project doesn't show up. the only thing that appears is the 'Project Name', 'the location', and the working set.
View 3 Replies View RelatedI am having the contact source code which i want to build on eclipse & test on emulator,but the contact application uses some of the hidden APIs of base code which is not present in default android.jar because of that i am getting lot of error in my code. I am trying to generate my own android.jar using "Android sdk - Including hidden APIs." option in android.mk of framework directory, but still the hidden APIs not getting exposed in android.jar. how to customize the android.jar in order to make all hidden APIs exposed to application.
View 2 Replies View RelatedI've experienced two problems with Google Voice that are causing me to get charged minutes I wouldn't usually get charged. If I can't solve them, I'll have to go back to using my Verizon number. First, let me say that I'm using a new Google Voice number that isn't Verizon cell phone number or any other preexisting number. Second, my girlfriend is on my family plan, but she doesn't have GV yet. We're using the 700-minute plan, so we don't have a friends circle.
Problem 1: When I call my girlfriend's Verizon wireless phone using the GV on my Verizon phone, I get charged, and when she calls my GV number on my Verizon Wireless phone from her Verizon wireless phone, she gets charged. We don't cash in on our free in-network calling. I know, this should have been obvious, but it just never occurred to me until after I looked at the bill. I'd be able to work with that, though, and just select "Call without using Google Voice" or whatever when calling her if it weren't for the second problem. When people call my Google Voice number, I get charged when I don't answer. Usually, it's just a one-minute charge, but sometimes it's two or three minutes (don't know why). With anything less than an unlimited plan, minutes count. Not good.
I am trying to build my first project for Android platform using the Eclipse IDE. The problem I am facing is that there is no option under the "Build Target" label in the New Android Project dialog box. And, hence I am not able to proceed beyond this dialog box (as the "Next" button is deactivated.) The online documentation says, "Under Target, select an Android target to be used as the project's Build Target. The Build Target specifies which Android platform you'd like your application built against." Could anyone tell me how to bring options under "Target" label. I am using Eclipse 3.5 (Galileo) and have installed latest Android SDK as well as all Android Platform components. The screenshot of the dialog box is available at : http://shared.pho.to/B2BF3343-D5DD-4ED4-F50F-468BEFC7698E
View 2 Replies View RelatedI currently have an Android project in Eclipse.
I created it with a target build of 1.5 (sdk 3).
Now I want to change it so that it has a minSdk of 3 and targetSdk of 8.
To do this I see that I must build against the newest SDK (2.2)
To do this in Eclipse I right click on my project, go to properties, click on Android and change the project build target to Android 2.2 and click apply and then ok.
However this appears to have no affect and when I try it again the target build is set back at Android 1.5.
Am I missing a step or something?
I'm having "The project cannot be built until build path errors are resolved" after each Project->clean in eclipse. I have two projects with one referencing another. The error appears in the project referencing the another one. When the error appears I go to the 'configure build path' and then remove and re-add the referenced project and then magically the build is done fine.
View 2 Replies View RelatedI do as following: >. build/envsetup >lunch 2 >make >simulator
View 5 Replies View RelatedI have an interesting problem. I pull down an android project from cvs, which works fine. Once Eclipse builds the project, my .java files are removed. XML files, pngs, everything else is fine. I seem to be left with just the package tree, but no source files. Any thoughts?
View 1 Replies View RelatedI am in need of help to complete my application. I am trying to execute a project that uses and android library. Basically I am trying to execute the android facebook sdk to run the sample code provided at http://github.com/facebook/facebook-android-sdk 1. I have downloaded the sdk and extracted the zip file to a folder 2. I used Eclipse galileo import to create an android project from existing resource. I imported the sdk source code (facebook folder of the sdk) into my project explorer successfully. I can also run Build Project for this source code. 3. Now, I am trying to import the sample example in it. The project is imported but I cannot execute it. I cannot build the project. Code...
View 2 Replies View RelatedI followed these tutorials to set up a Hello World Android app. But when I create a new java project I can't select a build target. It just says no targets available in the target selection box. I have confirmed that I am not having the UI issue described here (http://blog.rowancrane.com/2009/12/27/eclipse-new-android-project-cant-select-build-type-target), I actually have a message in the box saying there are no targets instead of an empty box. I also am using 1920x1080 res.
I'm guessing that eclipse is just not aware of my Android Targets? I installed them in the android SDK manager and see them listed under installed packages in the Android SDK manager (1.1, 1.6, ..., 2.2)
http://fyi.oreilly.com/2009/02/setting-up-your-android-develo.html
http://developer.android.com/resources/tutorials/hello-world.html
Any suggestions on how I can create the project and get started?
Whenever I do a Clean on my project, I get 2 errors:
1.) The project is missing gen folder.
2.) There is a build path error.
I go to "Configure build path" and uncheck "Android 1.6". It works. If I do this again, I go and this time check "Android 1.6". It again works.
My Android project in Eclipse has a build target of Android 1.5. I am trying to change the "project build target" by Windows --> Preferences --> Android. I select a different Target Name like "Android 2.2". I click Apply and OK. When I go back in the build target is still "Android 1.5".
I am using Eclipse Galileo and have recently upgrade to the latest ADT Plugin and SDK.
This always worked before the upgrade. Why Eclipse is not changing the "project build target"?