I have made a signed apk of an android project. Whenever my client try to run it on the emulator, he faces the following error message:
D:Androidandroid-sdk-
windows ools>adb install -r abc.apk
500 KB/s (6940708 bytes in 13.534s)
pkg: /data/local/tmp/abc.apk
Failure [INSTALL_PARSE_FAILED_NO_CERTIFICATES]
View 3 Replies
I have a project that builds against Android v2.1 . I can run it fine on a phone running 1.5 but when I try to launch it with an emulator running 1.5, the emulator doesn't show up on the list of available AVDs. I have the <uses-sdk android:minSdkVersion="3"/> tag in my manifest but it doesn't make a difference.
View 2 Replies View RelatedI downloaded the most recent version of Android for linux (android-sdk_r05-linux_86.tgz). I was trying to use the the Android Ant task(s) for packaging, building, and deploying my code. I should mention that I'm running AMD64, but have the 32-bit libraries installed. The Android Ant tasks are all broken.
First, the start-emulator task never gets the emulator running. It does get past starting adb, but then just sits there.
Second, the SDK is missing the aapt binary in the tools directory. So, the example notepad sample application will not even package correctly.
I have all the dependencies configured for Android. I can run it from the command line just fine.I assume the Ant code is out of sync with the recent SDK updates. Can anyone shed some light on this problem? At this point, I'm considering writing my own Python scripts to interact with the Android SDK. Ugh.
Android APK-Files are not binaries but byte-code-files. So is it possible to install the same APK-File on both - on x86-Android-Devices and ARM-Android-Devices? There are some x86-Netbooks with Android installed planned and I wonder if it is possible to run the APK-Files on both kinds of devices?
View 1 Replies View RelatedI am new to developing for android and I have a problem. I can't debug my app on the device by running ABD devices I can only see the emulator!
View 2 Replies View RelatedI have set my android sdk, and reached the main activity page. But when i run the first app of hello world, nothing happens. I have also set the android virtual device manager. so in short, i've a problem that emulator is not running.
View 5 Replies View RelatedI'm running Leopard. I create an avd without problem, but when I run it I get a bus error. I've tried to run the emulator both with and without adb running first. Eclipse (w/ ADT) is not yet running. Any ideas?
View 6 Replies View RelatedI have issue with running apps in emulator from Eclipse. I was using tutorials from http://developer.android.com: http://developer.android.com/guide/tutorials/hello-world.html http://developer.android.com/resources/tutorials/hello-world.html
Also, i tried running sample projects delivered with SDK. Whenever i run project, emulator loads but my project is not installed. And when emulator loads, nothing happens. I was searching on web a bit, and i figured that if i restart 'server' it continues to install my app:
android-sdk ools>adb kill-server - D:...android-sdk ools>adb start-server - * daemon not running. starting it now * - * daemon started successfully *
Log:
New emulator found: emulator-5554 - Waiting for HOME ('android.process.acore') to be launched.
You received this message because you are subscribed to the Google Groups "Android Developers" group. To post to this group, send email to android-developers@googlegroups.com To un subscribe from this group, send email to android-developers+unsubscribe@googlegroups.com For more options, visit this group at http://groups.google.com/group/android-developers?
Downloaded the new 2.0 sdk the other day, and tried testing my app on 2.0 via the emulator. I am using eclipse, and when i click run, the new emulator runs with my 2.0 avd. but when eclipse tries to install it i get this in the console. Installation error: INSTALL_FAILED_CPU_ABI_INCOMPATIBLE Please check logcat output for more details. the log has this 11-04 18:16:01.818: ERROR/Package Manager(53): Package com.(package).android has mismatched uid: 10025 on disk, 10026 in settings; read messages: 11-04 18:16:01.818: ERROR/PackageManager(53): Read completed successfully: 41 packages, 6 shared uids 11-04 18:16:01.906: WARN/PackageManager(53): Install failed: .apk has native code but none for arch armeabi 11-04 18:16:01.932: WARN/PackageManager(53): Package couldn't be installed in /data/app/com.(packagename).android.apk I can not figure out why it does this. I have searched aimlessly for answer and this is one of my last resorts.
View 9 Replies View RelatedI set up Eclipse as directed on the android development site, and ran the emulator after building one of the sample apps. The emulator comes up and just displays some text and doesn't function after that. The program doesn't even seem to run. I am following the steps on the site exactly (or at least I think I am), but no matter what program I try to run on the Emulator it never seems to function (just displaying that same message).
View 5 Replies View RelatedI have removed all Input Managers that were added, but it's still happening. Any ideas?
Process: emulator [460]
Path: /usr/local/dev/android/android-sdk-mac_x86-1.5_pre/tools/emulator
Identifier: emulator
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: bash [275].....................
I have written some code in eclipse and I want to run it on two separate Android emulators.
How do I do this when I click "Run"?
I read online and it said I need to do AVD configuration. What is that and how do I do that?
How to run the emulator within eclipse without using ADT. All I want to do is run the emulator with -partition-size option of the emulator and you cant do this by default. Im sure there might be a tricky way of doing this but googling doesn't give me any clues. does any one know ? I also thought about running the emulator as part of a script and call the script within eclipse.
View 1 Replies View RelatedI need to force an Android project created in Eclipse for the 2.0 platform to run on the 1.5 AVD (emulator). This is due to the fact that I'm writing an app that will support both the Contacts API and the ContactsContract API.
View 2 Replies View RelatedI have a android but I love I phone.... It's so good looking.. So, i wanna try an Ios emulator for android..
View 9 Replies View RelatedIs there any way to connect the debugger to an emulator running on a remote machine? It's using TCP so I suppose it shouldn't be too difficult, but I can't figure out how. I would like to run the emulator on my (fast) laptop and do my coding on my (slow, but with bigger screen) desktop machine.
View 4 Replies View RelatedIs there anyone have successful experience getting nexus 1 kernel running on top of the emulator coming with the SDK 2.1? I can not even bootstrap the kernel , I mean I didn't see something like the following as what I did on goldfish kernel Uncompressing Linux. done, booting the kernel. .....
View 2 Replies View RelatedWhen launching my app from within Eclipse, sometimes the running emulator is found and displayed in the launch dialog, sometimes it isn't?! Killing adb, the emulator and Eclipse usually helps until it happens again. Any idea why this is? I see this behavior since the launch of Android. I am running on Mac OS X. And it happened on Leopard as well as Snow Leopard.
View 9 Replies View RelatedI'm running the emulator using the dev phone system images of 1.6 to download paid apps from the market to use on my htc desire in sweden. Why? because the market for paid apps isn't available here. The apps in question aren't available on slideme etc either so this is my last resort. One problem arised: An app I downloaded works for 2.1 and desire, but when I download it from the market with the emulator with 1.6 I get an older "legacy" version of the app that isn't compatible with 2.1. Due to this I wonder if there is any hackie crackie crazy way of getting a 2.1 system image onto the emulator or in any other way fooling the android market app or whatever to download apps as if the emulator phone was 2.1?
View 4 Replies View RelatedWhat's the best way to record a video showing things running on the Android Emulator? I want to record little demo videos of stuff running so I can put it on YouTube. I'm running the emulator on either Windows or a Mac.
View 6 Replies View RelatedI am trying to write an android application and my workflow is as follows:
Write some code
Click run as Android Application
Eclipse then starts the android emulator
Install the app on the emulator
Run it
It seems to me that there is no need for it to start an android emulator(3) each time and to kill it. It'd be nice if there was a way an android emulator always running and eclipse just installs/uninstalls the app instead of making me wait every time.
How to find, what are the tasks running in android emulator?
View 3 Replies View RelatedI've created a device targeting 2.1 and having a screen screen size of 480x800 (WVGA). Some apps, including the one I'm currently writing, as well as the ApiDemos example, won't run fullscreen. I've uploaded a screenshot here: http://img248.imageshack.us/img248/503/emulator.png. What could cause something like this? If I run these apps on my HTC Desire (which has the same resolution), they utilize the whole screen like they should.
View 2 Replies View RelatedIs there a command to find out the pid of all process running on the emulator? If yes, can you please tell me how can I do that?
View 3 Replies View RelatedTo make development easier, I want to be able to send textual commands to my android app(especially prior to having prior the UI completely fleshed out).Presumably in the emulator, but it would be great if it also worked on a device connected via USB.Of course, I could add an editText control to my app and type the commands in there, but would prefer not have deal with debug things cluttering up the UI and all the complications of that.I also would like to be able to paste text from computer clipboard, which sorta rules out EditText controls.Is there any way to do this, say via any of the android-sdk/tools/ stuff? I would implement the command processor java class/method, but need some way to be able to actually feed it a string. I suppose I could do something that talks to the emulator via the file system or something, but would prefer not have to spend a lot of time doing this if there is something already available.
View 2 Replies View RelatedA while back I mentioned that running the imported p2p codebase I have on the emulator (on a fairly powerful laptop with plenty of mem and a fast processor) was pretty slow. I blamed all that on the codebase and in fact I was able to profile it and make it much lighter. Well still the overall app performance is slow --- and I am finding that most apps I run on the emulator are fairly slow. Is this a common trend? I do expect emulators, who are by no means a real device, to have such processing delays but are they in general this slow? Any metrics or any other feedback from anyone that depict the factor of slowdowns you would expect on an emulator vs the real device? I know a lot of this are machine dependent as well but consider an idle powerful machine. And regarding memory - I am loading Eclipse with close to 1G to be able to run the emulator and its basic services - is that normal?
View 3 Replies View RelatedIs it possible to run the android image distributed with the SDK using the standard qemu executable (instead of the emulator executable)?
View 2 Replies View RelatedI setup Hello Android sample app on my Eclipse ( Windows XP). ADT got installed correctly. All post installation config also looks good. I setup HelloAndroid project.
I run first time . It was successfully run and connected to emulator , produced desied message on emulator.
What happened , when i tried to run same program again it stopped working at console trace ( see below console trace). I tried to reset Adb from debug view. Also tried to kill Adb from command line. I completely exited from Eclipse and restarted. At last completely rebooted PC but no luck. I never changed my code a bit after running successfully first time.
Hello Android stops at following message.
[2010-07-08 16:08:59 - HelloAndroid] Starting activity com.example.helloandroid.HelloAndroid on device
[2010-07-08 16:09:02 - HelloAndroid] ActivityManager: Starting: Intent { act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] cmp=com.example.helloandroid/.HelloAndroid }
I managed to sign in with my google account (using the Google API AVD), but any notes that I write does not sync to the jumpnote.appspot.com, and vice versa. I notice in the account settings, it says "sync is OFF". I click on menu and the "sync now" button, the sync icon shows up momentarily on top but nothing happened after that. The notes I wrote on the phone do not get reflected on the server. Did anyone manage to get the jumpnote sample to sync successfully via C2DM?
View 1 Replies View RelatedI know that Google elected Windows XP (eXtra Problems) to be the minimum operating system, but was anyone here able to run it on win2k? Being able to run the emulator OR install the native driver (to debug in the device) would be enough. I really would not like to have to buy a new computer just because of android. Since I already work with many other platforms without problems.
View 11 Replies View Related