I'm facing problem in scrolling. I've 20-25 items in my List, if i checked first check box, scroll down, then come up, my checked status lost (becomes unchecked), in cursor adaptor. If i use base adaptor problem is resolved but major issue with base adaptor is performance, if my list goes beyond the 100 items.
View 9 Replies
I'm new to android, please help me how to save the state of checkbox,
i.e.
I've ListView with checkbox, three textview and again checkbox. I wish to save the checked state of item(s),
how to save the state of checkbox.
I am using a ListView in which only one item can be checked at a time.
This is my custom list_row.xml :
CODE:..........
I populate the list in onCreate() using a normal array adapter :
CODE:............
When the list is displayed, I want to have, say the 5th item, in the list as Checked. How can I go about doing this? I know CheckedTextView has a function called setChecked(), but how can I get my 5th item from the list to apply this function on it?
I have TabActivity that uses 2 other ListActivities for the tabs. Both underlying ListViews are set to CHOICE_MODE_MULTIPLE. When I run the following sequence of events, I get a strange result: 1) Setup one activity (tab) and its ListView using a CursorAdapter, including checking some items on the list 2) Reorient the screen (open the keyboard) 3) Setup the second activity (tab) and its ListView using a CursorAdapter, including checking some items on the list 4) Switch back to the first tab
At this point, I can see in Eclipse that although (of course) each ListView is a distinct object, the internal variable used to store the checked state of items, called mCheckStates, is the SAME OBJECT REFERENCE in each of the ListViews.
Clearly this is an issue, since the two views should not share the checked state of items between them.
If I skip step #2, this does not occur
Here is a bit more detail:
After Step 1: ListView1 is object reference @1, ListView1.mCheckStates is object reference @2
After Step 2: ListView1 is object reference @3, ListView1.mCheckStates is object reference @4 (the reorientation recreates the views)
After Step 3: ListView2 is object reference @5, ListView1.mCheckStates is object reference @2 <-- note the reuse of this reference from step #1, not sure how/why
After Step 4: ListView1 is object reference @3 (unchanged), ListView1.mCheckStates is object reference @2 (changed) <-- same as ListView2.mCheckStates
Given a listview that shows checkboxes next to a list of people, I want to be able to get the names (in Strings for example) of the people who are checked. I have set my listview mode to allow for multiple checks.
getCheckedItemPositions()
Will get the positions but I can't figure out how to iterate over the listview to get the names. Also Eclipse tells me that getCheckItemIds is not a valid method for ListView.
I have a ListView that just contains a CheckedTextView. I have a very simple CursorAdapter that populates CheckedTextViews. When I click on an item, I can see that I am responding to the correct row, store the value in my model and the CheckedText gets checked. However, when I scroll down and then back up again, while I see that the model contains the correct value (in #bindView), calling #setChecked on the CheckedTextView has no effect. Ie All items are unchecked. Code...
View 9 Replies View RelatedHow can I stop email (Gmail) from being checked all the time. I want to manually check it as required.
View 8 Replies View RelatedIve got ListActivity and i am using custom CursorAdapter. in each item of the list ive got also checkbox. now i have in my list screen a perm button, when you press on it, it should find all the checkboxes which are 'checked' and do some operations on the item which it's checkbox is 'checked'. how can i retrive all the checked ones? ive done focusable:false, so i can use OnClickListener, but i dont know how farther then
this..
some code:.............
The problem is that when I filter the list the entries switch position in the list view. Take for example three entries: 'A', 'B' and 'C' where 'C' is checked beforehand (i.e. the entry at position 3 in the list). When I type a 'C' on the keyboard, only the 'C' entry is displayed (as intended). Now 'C' is not checked anymore, since the entry has moved from the checked position 3 to the unchecked position 1 in the list.This behavior leads to some not very welcome effects in the app. Is there a way to "move the selection with the filtering", i.e. bind the checked state to the entry and not to its initial position in the list? Or do I need to find a new approach?
View 1 Replies View RelatedCurrently I have a list view within it each row has a checkbox attached. I would like that once any checkbox is checked, at the bottom of the screen a view displays, and once none of the checkboxes are checked, the view automatically disappeared. Possible to do this?
View 2 Replies View RelatedI am having a really difficult time trying to work with android's ListView multipleChoice mode. Here is what I am trying to do:
I have a "players" button in a game setup screen. When this is clicked it opens another activity with a multipleChoice ListView of all the players in the database in CheckedTextViews. I have this working properly and when you click on a player they will be added or removed from the game via a query to the game_players table.
The problem I am having is in setting up the ListView so that the players that have already been added to the game get checked initially when the activity opens.
I have tried to do this by iterating over the entire list in the ListView activity but this doesn't work because the Views that are not currently visible can't be accessed to check.
So now I'm trying to do this in my extended SimpleCursorAdapter in bindView but I can't even get this simple code to work:
CODE:.........
It correctly sets the player's name with setText(), but I can't get any of the boxes to check in bindView. Is there somewhere else I should be doing this or am I just doing it incorrectly?
There must be a way to do this. How can you tell a ListView that has a header to not scroll it when the user scrolls the contents? I want it to stay in a "stuck" position so that the user can always see what column the content applies to.
View 9 Replies View Relatedhow can i check for the transceiver state(disabled/enabled/power-save mode/active mode) in the wifi module of android framework??
View 3 Replies View RelatedHow do I check whether the local service inside my application is running?
View 1 Replies View RelatedI have created one custom view that contains the horizontalscrollview. Now when i changes the orientation its scroll state change to 0 every time. I got the previous scroll state by using onSaveInstanceState(Bundle savedInstanceState) and onRestoreInstanceState(Bundle savedInstanceState) . in onRestoreInstanceState i am using following method to get reposition the scroll, hoz_scroll.scrollTo(hoz_x_pos, hoz_scroll.getScrollY());
View 2 Replies View RelatedI'm trying to make a layout that is something similar to how the android market is...where say under comments there is what appears to be a ListView but it does not scroll (the whole page scroll but not the comments). I'm not sure if its even a ListView but I want something that looks like the list view (ie. have those divider bars and what not but NOT SCROLLABLE). There are people suggesting to use a LinearLayout instead of a ListView but I also what the items to be clickable and open a new activity. Please help?
My current layout tree is like so
<LinearLayout>
<ScrollView>
<RelativeLayout>
I am looking to put content inside the RelativeLayout.
I have a ListView with custom rows. When any of these rows is clicked, the ListView's data is regenerated. I'd like the list to scroll back to the top when this happens.
I initially tried using setSelection(0) in each row's OnClickListener to achieve this but was unsuccessful (I believe because the ListView loses its scroll position when its data is invalidated - so my call to
setSelection is undone. I still don't understand how the ListView decides where to scroll to after invalidation, though).
The only working solution I know of was given by Romain Guy here: http://groups.google.com/group/android-developers/browse_thread/thread/127ca57414035301
It involves (View.post)ing the call to _listView.setSelection(0). I found this to perform quite poorly.
The newly generated list shows up with its scroll location unchanged and there is a considerable delay before it scrolls back to the top.
Is there any better way to achieve this functionality?
In one of my projects I've got a ListView with hundreds of elements. But when scrolling through this list I get the following error:
CODE:.....................
Any one knows why my ToggleButtons won't keep their states in a ListView?
Each list item includes a ToggleButton - when scrolled off from the screen their states are reset to unchecked...
I presume getView() is called once they're visible; however I'm not re instantiating them anyways.
I want to display Header to my ListView. I used getListView ().addHeaderView() method to add header to Listview. but this is Header is scrolling with List.I want header should be constant.
View 2 Replies View RelatedI am having a customized list view in my application, which is showing an image and text.
The Image I am getting from URL, using the code below:
CODE:..............
All is working perfect, except the list view scrolling, its very slow. If I disable the images, the scroll speed smooth-ens , but with the image enabled, it lags alot.
Is there any possible way I can reduce or remove this lagging?
I would like to have a ListView that scrolls in a carousel way, so when you scroll to the bottom and continue scolling, it should get back to the top element.
I do not want to use ViewSwitcher, nor ViewFlipper. How can I achieve that?
I'm having problems with ListViews in my application. I thought everything was fine until I noticed that if I scrolled up and down through the list quickly a number of times, sooner or later the app would crash with an OutOfMemoryError.
When I searched for the error I noticed a number of posts related to loading images. As my list items included a small arrow png, I assumed the problem lay here. However even after removing this and all other drawables I had (gradient background and list separator) the problem still remains.
Here's the stack trace
CODE:...............
I've had a look in DDMS and noticed that the percentage memory used in the heap doesn't go above 70%. Also, doesn't the reported 66K seem like a very small amount to be causing a crash?
I want to disable scrolling only of a ListView and keep it's items to still be click-able.
The idea is to control the scrolling via other means and not user touch. i.e. up/down buttons, or random scrolling...
I have a scenario, where I have three buttons(like tabs) and when clicking on each button, I am showing a listView, such that, I select one button and scroll the listView. During scrolling if I click on any other button, that list is also continue scrolling. Actually, I don't want the scrolling
When I click on any other button, it should not scroll and it should be in the starting position(means index 0).
I tried onScrollChangeListener(), in that onScrollStateChanged() is there.
I tried putting setSelection(0) in SCROLL_STATE_FLING & SCROLL_STATE_SCROLL state.
Its going to index zero, but continue from there, its still scrolling. How can I stop this scrolling.
I want to lock the scrollBar of ListView.
I have tried to use some ways, but these all are not avairable. - ListView.setEnable(false) - implemented return false of areAllItemsEnabled() / isEnabled() of Adapter. - set to none attributes android:scrollbars of ListView of layout.xml
I'm completely stumped on this one. I have three different lists that need to be displayed on the screen.
I've tried using a ScrollView with a LinearLayout child, and putting my ListViews in the LinearView, but all of the ListViews lock to a fixed height with scroll bars. Using other kinds of Layouts means no scrolling.
I am facing a very mysterious Problem. I am using a ListView with CheckBoxes that can be clicked to select people. The row layout is the following:
<?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="horizontal" android:layout_width="fill_parent" android:layout_height="wrap_content"> <CheckBox android:focusable="false" android:onClick="onSelectPerson" android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="center_vertical" android:layout_marginRight="5dip" android:layout_marginLeft="5dip"/> <TextView android:id="@+id/person_name" android:text="test" android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="center_vertical" android:textSize="18dip" android:layout_marginLeft="5dip"/> </LinearLayout>
As long as the amount of rows doesen't exceed the screen size (-> no scrolling) everything works just fine. But as soon as I have more rows then the screen size (-> some rows are hidden and have to be scrolled to). I have a very mysterious phenomenon: If I check the top row and scroll down some of the previously hidden rows are randomly checked too. If I scroll up again, again some of the before hidden rows are randomly vhecked (the CheckBox I clicked in first place may or may not still be checked). Also the registered onSelectPerson callback is only called for the CheckBoxes I really click. The other CheckBoxes just change their state to "checked" without calling the callback method. I have the same phenomenom on the Archos IT 5 and the Nexus One. This must have something to do with the ListView implementation but I can't quite figure out what the problem is.
My ListActivity is bound to an ArrayAdapter where I have overriden the getView() method. If I change the visibility of a widget in that method or modify the view's background color, those changes somehow get lost once that modified list item returns after being scrolled off the screen. In fact, some other view in the list is picking up the changes. How do I get the modified view to look the same when it's redisplayed after scrolling?
View 1 Replies View RelatedIn the new official Twitter app, the scrollbars in all the ListViews the app uses are hidden unless the user is scrolling through the list.
When you start scrolling, the scrollbars appear. When you stop, they fade out with an animation until they are gone completely.
I can't seem to find anything in the documentation that indicates this as being a standard feature.
Is this something included in the API? If not, anyone know how this might be done?