What is the best way to debug ANR. ideally, it would be nice to know what call / thread / file and line number it is stalled at when the ANR occurs, but every time I look at /anr/traces.txt, I can't seem to find anything that points to something I can start tracking down.
View 5 Replies
I have mostly been avoiding debugging when I can because of these two problems, so hopefully someone here has suggestions to avoid them:
1. It seems that I have to build the SDK (`make sdk`) and copy it off to a directory for Eclipse to use almost every time I want to debug. I haven't followed through the "sdk" directive, so I'm not clear on why this is necessary instead of just having Eclipse read from the source in my directory. Isn't there some way for it to do this? FYI: I have a (modified) full checkout of Donut, not just the SDK.
2. How can I debug without using Eclipse? I would really like to be able to use something like gdb/jdb.
My app is crashing, How do I debug it? I'm using a HTC Magic and eclips. I looked in the documentation, but it doesn't say how to go about doing it.
View 3 Replies View RelatedHow to debug application using gdb .
View 2 Replies View RelatedI'm trying to debug a native shared library that my App uses through JNI. I can attach to a running app just fine with "gdbserver --attach pid" but i need to actually launch my app when i launch the gdbserver command.
There's a million blog hits on this topic but none of them seem to be clear as to how you launch your app. They all say to just type "gdbserver 10.0.2.2:1234 ./MyProgram" but what exactly is "MyProgram". Is that MyProgram.apk? Is it MyProgram.so? Is it some other file that gets created when the app is installed? If so, what's its path?
I've tried to debug the android applications on emulator and than on the device as well but all the time I get the message "Wait for debugger - waiting for the debugger to attach to the process". I really don't know how to set the environment and the application in order to run the debug.
View 2 Replies View RelatedIs there a writeini / readini functions for andriod/ecplise developent? Or what is the best way to 'remember' a setting, and then at a later time restore it?
View 5 Replies View RelatedI have a user that says my application gives him an error on the Samsung Galaxy (it works fine one the G1). How can I debug this issue? Is there an accurate emulator/simulator? Can someone try it (Bendometer is the app)?
View 2 Replies View RelatedI am using Windows 7 64bit and I am trying to get my computer to detect my HTC Desire, but it's not picking it up. I have everything available installed through the Android Updater and I have got my phone running through Ubuntu, so it is definitely a problem with Windows.
I am using Windows 7 64 bit. I have a HTC Desire running Stock 2.2 (Froyo) that works with USB Debugging on my Ubuntu machine. Windows does detect that my phone is plugged in. It shows as a mass storage device. I have all the available things installed via the Android Updater.
I recently downloaded the latest NetBeans IDE (for MACOSX) and imported/migrated a project over from the ECLIPSE environment.Everything looks, and works well... except that EMULATOR gets stuck "waiting for the debugger to attach." I tried "Attaching Debugger." and set the PORT value to every case I've ever read about (8200, 8700, 5555, etc.) but the connection is refused.I am of the opinion that this is not the preferred way to start a debugging session in NetBeans for Android.
View 2 Replies View RelatedCan I copy the debug.keystore in My home directory to another PC's home directory? Does it have to be Linux on Linux, and Windows and Windows? Can I copy Linux keystores to Windows, and vice-versa?
View 1 Replies View RelatedAll right - I admit my defeat. Can anyone walk me trough successfully debugging with MyTouch? Here's what I tried: 1. Plugged in the phone - my XP Prfessional never asked me for anything - just simply told me that "Hardware is ready to use" 2. In the phone - mounted USB - no problem accessing phone's SD which is mounted as a drive 3. Disconnected phone and in developer setting enabled Settings- >Applications->Development->USB debugging.
View 4 Replies View RelatedI can't get Ubuntu 9.10 to recognize the Nexus One as a debug device. I tried following the instructions found here but they are not working: http://alan.lamielle.net/2010/01/22/nexus-one-usb-in-ubuntu-9-10
Anyone know of a link or know how to get the Nexus One to debug correctly in Ubuntu 9.10?
I've been developing on the simulator, but now I have a real device.
adb can see the device (from adb devices), and I've installed Eclipse/ ADB.
I can't work out how to get debug to use the device instead of the simulator though.
what do the following mean in the Heap view of *DDMS*:
1) Data Object
2) Class Object
3) 1,2,4,8-byte *array* : which arrays are we talking about here??
4) non- Java object
I have a HTC Hero and newly also a Nexus One. I used to debug with the HTC Hero which worked just fine. Now when I try to debug with my Nexus One I just can't make it work. I updated everything Android via Eclipse and have now the version which officially supports Nexus One as a debug device. Whenever I connect the Nexus One, turn on Debug Mode and want to run the application I don't see the device in the debug list.
Anyone got any ideas what I might do wrong? As said above, with the HTC Hero it works just fine.
I'm new to Android development, and am attempting to run a test application on my actual device. I followed the instructions at http://developer.android.com/guide/developing/device.html (and related links), but the Android Debug Bridge (adb) doesn't recognize my connected device.
Some quick background info, I'm running WinXP, developing with Eclipse, with a Motorola Droid running Android 2.1 as my physical device.
An overview of the steps I've taken: Installed the Android SDK, downloading all necessary packages. Enabled USB Debugging on my device. Connected Device via USB, installing the driver from the SDK folder.
I'll stop here (though I continued to setup my application to be debug-able in Eclipse), because I at this point I noticed a problem.
Running "sdkoolsadb devices" at this point (at least, by my understanding), should list my device as connected. However, running this yields only: List of devices attached
My device recognizes that it's connected to a computer in debug mode, and my computer recognizes the device. However, I can't seem to get the sdk to recognize it. I'll leave out the steps I used to setup Eclipse for debugging on a device, as it doesn't seem relevant to the problem. I'll include them if requested.
I have a HTC Desire which i would like to debug and run my Android application on. But when i in Eclipse gets the Window where i can choose between devices my HTC Desire is listed with only questionmarks (???).
I have tried this:
Enabled USB Debugging on my device and enabled debugging in my application Manifest.xml file.
In Terminal i have do this:
1. Log in as root and create this file: /etc/udev/rules.d/51-android.rules.
2. SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666"
3. sudo service udev restart
I've got some trouble with the media backend (mostly Stagefrightplayer) in Android, and I'd like to understand why it throws the errors it does. The errors are usually device spesific, so debugging on an emulator wouldn't be sufficient.
Example:
CODE:.................
Example 2:
CODE:.............................
I've also gotten the player to bork completely and spit out a traces.txt.
Is there a way to debug what's happening, just like I debug Java code?
The desktop application emulator works fine. Settings > Applications > Development > USB debugging is checked. The "USB debugging connected" alert is displayed on the Nexus One when the USB cable is attached but I can't seem to get the debugger to run the code on it. Is there something else I need to do to get the debugger to work on the device?
View 2 Replies View RelatedI want to debug on my device and I am using a Windows 7, 64 bit, but I can't find correct drivers to do so. The perspective in Eclipse is whether changing nor halts the IDE at any breakpoint.Can you send me any suggestions how to use debugging?
View 6 Replies View RelatedResent, it seems that the thread to android-discuss is lost.
View 2 Replies View RelatedIs their any other way to debug the framework sources? .Instead of adding logs in the framework source and building again.
View 3 Replies View RelatedI installed and eclipse, android sdk and tried the first "hello, android" tutorial but nothing happened on the AVD There are no compilation error, I tried to set break points in the but it does not seem like the application started running at all...
View 2 Replies View RelatedI have a brand new Galaxy Tab that I am trying to use for some development. However, the usual method of installing the ADB driver isn't working on my Win 7 x64 version. (I have even tried the USBDeview method of deleting everything that looks like an Android device.)
Has anyone out there gotten this to work? If so, what did you have to do?
I am programming Android applications, and the best way here may or may not be the same as Java in general.I simply want to be able to set a debug flag that will only execute certain portions of code when it's set to true equiv to C++ setting a preprocessor #define DEBUG and using #ifdef DEBUG.Is there an accepted or best way to accomplish this in Java?
Right now I'm just going to set a variable in my Application object, but I don't imagine this is the best way.
I made a mistake and I still had the debug version of my app (from Eclipse) on my phone when I tried to install a signed version. The install failed, but I could no longer access the debug version in Manage Applications to un install it. I was at work and couldn't reinstall the debug version in order to uni nstall, so I did a complete factory reset of my phone (using My Backup Pro to backup stuff). Now I can install my app. However, now I notice upon reboot that my app loses all of its data from shared preferences. I'm not entirely sure that it's not a problem of mine somehow, but does anyone know why it is doing that and how I can fix it? I may have left the debug gable. true on in the version I'm trying to test. Would that cause this problem?
View 3 Replies View RelatedAndroid Debug Bridge. i am trying to get past this part to root my phone. i go to start on the pc and open "run". i type in cmd. this is supposed to show up C:. but instead i get this C:Documents and settingssteven>. i cant copy and paste over this.
View 44 Replies View RelatedI created one android application it is using one native method. I created shared library using ndk tools.My jni function is having some problems i want to debug it. How to debug it in eclipse tool
View 2 Replies View RelatedMy build was failing with a dex error. After I turned verbosity up to debug I got the following:
CODE:............
Here is the source of the class where it is failing to place debug info:
CODE:..................