i successfully debranded my rogers x10a to a generic x10a firmware. but for some reason i cant seem to update it to R1FA016. both ota and sony update software keeps telling me that my phone has the latest software. i was wondering if any1 faced similar issues and if there is a solution to this problem. i have the latest version of SEUS and PC Companion
Some people keep asking how to downgrade back to 1.6. So I wanted to provide how to do it
Note: This will give you UK Generic R1FA016 firmware
1) Install SEUS (Sony Ericsson Update Service). You can get it from here: http://www.sonyericsson.com/cws/down...-184.108.40.206.exe
2) Run SEUS, follow the prompts. You don't need to update the phone through it, but get the phone ready for updating. This process should install the drivers necessary for the rooting process.
Note: I suggest you keep your USB cable attached to that USB port. Remember which USB port of your computer it's attached to, as changing USB ports can lead to a bit of confusion for the next 2 steps!
3) To check if #2 was successful, click on Start, click Run, and type: regedit In the Registry Editor that pops up, click on Computer, press CTRL+F, and search for this: USBVid_0fce&Pid_adde
After it's finished finding, on the right side you'll see DeviceInstance, then it says REG_SZ, then it says something like USBVid_0fce&Pid_adde5&270d2a78&0&3 You'll need that last bit (in this example: 5&270d2a78&0&3 Yours would probably be different). This is your DeviceID (you'll need it soon!)
Note: You may have multiple of these if you plugged the USB cord into many USB ports on your computer. Each USB port will give a different DeviceID, so if you have more than one DeviceID, you'll have to choose one, and if it doesn't work (you'll find out when you reach #5!) you will have to choose another one.
Alternatively, download the file in the next step and extract it, go to the folder called 1st, and run the DeviceID.jar file. It should give your DeviceID
4) Download this: Download R1FA16 rar or from here: [url] Extract it. In the step1 folder, you'll see a file called DeviceID.txt Open it up, delete whatever's there, and put YOUR DeviceID (that you found from the previous step). Save the file and close notepad.
Note: Make sure there are no extra spaces or lines after/before the DeviceID. The ONLY thing that should be in the file is your DeviceID, NO SPACES/LINES (for example, only this: 5&270d2a78&0&3 [yours will probably be different])
5) Take out the USB cable from your phone (leave it plugged into your computer) Turn your phone OFF. Open up step1.cmd (it's not inside the step1 folder, but outside it), but DON'T PRESS ANYTHING
Now we have to put the phone into flash mode. This is how you do it: Hold the Back button on your phone, and while holding the back button, insert the USB cable into the phone. A green light should come on the phone (like when it's charging or a missed call) Quickly "Press any key to continue..." in the open step1.cmd window.
Let it finish what it's doing. It will say "Press any key to continue..." after it's finished. Until then, DON'T touch anything!
If you get problems in this step, refer to this post:[url]
Here's a helpful video for common java issue: [ROOT/De-Brick Guide] Java Issue 64 bit Fix Walkthrough (Video guide included) - xda-developers
After completion, this will give you a Generic X10i R1FA016 firmware (check it by pressing the left button, go to settings>about phone and at the very bottom under build number) Keep your phone plugged into the USB.
6) Run SEUS to get to the latest firmware (do this before 2.1 is released in the UK if you don't want 2.1)
i already installed a software update software after opening it i m unable to confirm my phone. Can any body tell me the way, how can i confirm my phone, it shows me to switch off the phone unplug the battery n wait for 5 sec. then reinsert then plug the USB n continue holding the power button but it can't detected my phone.
can any body tell me how can i use this application. what is the full procedure?
My phone is not able to communicate with any google server and as a result I cant access the Market, Facebook, Email and other such features which require a google account. It is showing "Can't establish a reliable data connection to the server." This persists since I bought the phone about two weeks ago.
I have done several searches how how to transfer all my message from my nokia 5800 to my SE x10i. i had load of message on my sd from nokia, when i inserted the card and tried to import from sd card, it was telling me nothing to import.
Last night I updated to X10i on the PC Companion. At first I freaked out when I turned by phone back on, but then began to enjoy the new look etc. However, I noticed that browsers and apps DO NOT work (Android Market, Facebook, browser etc) whenever I'm connected to my Wi-Fi at home, but when I turn the Wi-Fi off and let it go to 3G, they all work fine...wtf? My phone was sitting 2 metres away from the signal. It's definitely connected as it has the Wi-Fi logo on the top of the screen, it's just that nothing will load.I'm in Australia and we don't have the 2.1 update yet, so that's out of the question for now.
I am a new member and a relatively new owner of an X10i. Overall I am happy with the phone but I am hoping some can answer a question. When I press the home button (middle one) I get a prompt to select to 'Complete Action using Home or Timescape' This is quite annoying. I want the default action to be Home (not Timescape) but despite ticking the box in the prompt it still pops up this box.
I have an X10i locked. I in error entered a wrong code 5 times and now i have ran out of attempts to unlock the phone or enter any unlock code, Now i have the right code confirmed by 3UK but have no attempts to enter an unlock code.
Problem is that i have a Xperia X10i and what happens is that it is with battery LOW ! I have de wall charger and the USB Cable, they're both original, and because of LOW Battery is always flashing red as well, after a long time the LED turns green (FlashMode) but is Useless, PC Companion does not install the firmware freezes and then tells me tha sony motor etc failed, Update Service Fails too, says to check if the battery is charged what obviusly isn't, tried flashtool but it always get stuch on some part, maybe its the .ftf tha is corrupted, i don't what place should i downloade FTF's, i downloaded those from sites.
My X10i fails to install the update, it downloads and starts updating then about 2 seconds later says failed, it does this with PC Companion and SE updater, it does this on win 7 64bit and win xp whats going wrong?
I am planning to buy a 32 gb micro sdhc card for my Xperia X10.However, I have found tons of confusing and conflicting information here on SE forums and all over the net.To my surprise, even Sony Ericsson itself giving conflicting information regarding this.On the product page of Xperia X10 (click this link and click on the specifications), it says that Xperia X10 supports microSD up to 16GB only.Whereas the official Sony Ericsson Xperia X10 White paper (on page no.5) says that it supports -microSD, up to 32 GB. (The Sony Ericsson Xperia X10 White paper can be downloaded from this link).Now i urge someone, preferably an SE moderator or staff, to enlighten on this matter and answer how and why SE is giving contradictory and confusing statements regarding the sd card capability and compatibility for the same product?.
So I did some modding (unfortunately) to the framework-res.apk file and it worked the first time and a few other times but then I changed something and now when I turn on the phone it freezes at the "Sony Ericsson" screen before the logo. What do I do?
I tried pushing the backup framework file but it says "failed to copy framework-res.apk to /sdcard/framework-res.apk: Permission denied
However, when I use adb devices, it does show my device as being attached.
So what can I do now?
I was also able to pull files...
Also tried manually putting the framework-res.apk in the sdcard and then using adb to copy it to the framework folder. Doesnt work. Saids that the directory cannot be open for read. I guess the device cant read the SD card until it boots up.
I saw that there are already a number of discussions about sony erricson synchronization but I cannot find one for this specific message: Synchronization failed. It wouldn't tell me why it failed, it just spits out that generic message after I click "Finish" in the Sony Ericsson Sync Client Wizard.
I'd like to use my X10 to keep all of my contacts' postal addresses in instead of the tatty old address book I carry in my handbag(!) I didn't fancy typing them all into the phone, so thought I would use the Sony Ericsson sync and put them into the pc first via the PC Companion sync application, and set up the sync to transfer them into my phone. I have tried a test run adding only a couple of addresses to my contacts on the pc, and adding one to my phone, but when I do a sync, the addresses don't transfer either way. I know that the actual sync is working because I added photos too and they transfer....... I must be doing something wrong that is easily rectified?