Samsung I7500 :: Triangle With Exclamation Mark In Recovery Mode
Feb 8, 2010
I don't have a rooted phone. I've been running the IK5 firmware for a while with no problems. I had to travel to the states and put my phone on airplane mode and then decided to shut it off. When I tried to turn it on, it would get to the Samsung "glowing" logo and stay there for awhile. Then the screen would flash and the Samsung logo would appear again. My phone was stuck in a loop after that. It never booted up. I decided to try and reload the firmware and that didn't help. Then I tried recovery mode. That's when I got the infamous triangle with and exclamation point in it. After that nothing. I guess I may have somehow bricked an unrooted phone. Although this isn't my specialty.
I just plugged in my HTC Incredible this morning because it was dead and it went to a black screen with a big triangle with an exclamation point. I tried holding down my lock button, nothing happened. I have nothing backed up, so it would be nice not to have to hard reset.
i have sony ericsson LT29i replica, i got error too many pattern attempts, unable to access internet from handset now i want to reset hard it by pressing volume down + power on, but i am getting just only Yellow triangle with exclamation mark on screen.
I was trying to install the latest software via software companion and it was taking well over an hour. So I removed the phone to complete it later. Big mistake. My phone is now disabled and only shows an exclamation mark and triangle. What I have to do to restore it.
Trying to reboot into recovery, and I get up to the point of my screen going white, saying htc EVO, and instead of recovery, I get a black screen with a picture of an evo, and an red triangle with an exclamation mark? what does this mean?
My phone works fine. Aside from rooting troubles, it boots up perfectly. Im on hboot 1.47 and want to root so I've been experimenting with it. ANyways, I boot into recovery mode, and all that came up was a picture of an eris with a red exclamation mark on it. What does this mean?
I have the dead android with the red triangle on the recovery mode, I upgraded to jellybean 4.1.1 but some reason KIES reads my phone as being SGH I 747, so I factory whiped and reset, reinstalled 4.1.1. My original issue was when I wanted to sign into certain apps the phone would vibrate and then the app would crash and I would have to start over or not use the app! I tried to install a correct jellybean 4.1.1 into the phone hoping to fix the issues but I cant do anything, Now there is a dead android with a red triangle no clue what that is! When I tried to install another zip I get verification failed in recovery mode.
I've had my Galaxy i7500 for about a year , but I'll be getting a HTC Android (not sure which) later on. But that's another story.
I need to do a factory reset on my phone because I had that lock screen block where it asks for your GMail, but nothing was working. I tried the "null" password trick, and that got me through. Then I (have had this problem for ages) decided to do something about that download error problem, where nothing downloaded, and the suggestions where 1. Factory reset or 2. delete some data and cache from apps. Did that. Now it won't accept my GMail login because it erased my GMail from the phone, hence the need for a factory reset. Now that you've heard my life story (sorry ), I'll get onto what I need.
Can anyone tell me the control for the recovery mode? I need them because reseting the phone through recovery mode keeps all of your pictures, videos and music but resets the rest. I like my media .
I tried to root my Nexus 4, and well I'm not too sure if it is rooted but after unlocking the bootloader and wiping the data, I got it to boot back up and then since then when I turn it off and try and go into recovery mode it has a dead android with a red triangle and says "No command." I can use the phone normally but it just wont let me get into recovery mode.
I rooted my DINC a while back using Unrevoked 3. When 2.2 became available via OTA, I kept refusing the update, because I wasn't sure if I could update to it from a rooted phone. My wife was using the phone one day when the update notice popped up again, and she proceeded with the update. Sure enough, the update ended up failing, with a red triangle and exclamation point.
After I rebooted the device, I never received another OTA update request. So I tried to unroot the phone, but clockwork seems to stick around. Just an hour ago, I tried to install the official 2.2 ROM (PB31IMG.zip). After applying the image, I get a green triangle, then the same red triangle with an exclamation point. I restarted the device, but now it boots into the white hboot screen, with the following info:
I did the simple root last night and installed the latest version of damage control that rom manager had access to. So after I loaded it onto my phone I tried to run DCupdater. The update downloaded fine, but I found that after it tried installing I would run into a screen that showed a yellow triangle with an exclamation point sign in it with an android next to it. What can I do so that I can update DC?
OK, I used Soup or Root to root the phone. I see that i have root access. I installed Rom Manager. But no matter what rom I try to install, I get the little triangle with an exclamation point with the phone below it. I am sure I am missing something. Help a newbie out? So far I have tried to install bugless beast and cyanogenMod.
Android 2.2 (froyo) is updated for GallxyS 2 days ago. So I just try to make it updated on the webpage to play. whenever I did, it just stopped with play button? or exclamation mark. What I did is following.
In main activity, webview = new Webview(this); webview.loadUrl("file:///android_asset/flash.swf"); webview.getSettings().setPluginsEnagled(true); setCeontentView(webview); and XML file is nothing changed from startup. Did I something wrong for the flash player?
I'm having with my Matrix One tablet. I'm getting an exclamation mark inside of a triangle, inside of a battery icon. The issue started after I let the battery completely die out. I can't get past that screen. When pressing power the battery icon shows up and the tablet shuts down a second later. I tried all button combinations to get into recovery, nothing worked. I've also tried charging the tablet.
There was one thing I managed to do, that was get the tablet to show up on my computer. I held down the update button with a needle and then held the power button until a blue light indicating the tablet was on showed up. The screen was black but my computer detected a new device. My computer didn't find any drivers for the tablet, so I went in search of them myself and couldn't find any. My tablet is A10 compatible, but none of the A10 drivers I found seem to work on my tablet when I go to manually update it through device manager, neither does the PDAnet method I found online.
I was able to find a recovery that works on my device, one that will allow me to reset my tablet, if I'm able to boot into recovery after I get it on my tablet. Now in order to even test the other recovery I need drivers for my device so ADB can detect it and I can push the recovery. My device is already rooted with Superuser updated to the latest build.
I'll add that I've even taken the liberty of opening up the tablet to see if I can disconnect the battery from the board to cut all power, as I'm unable to do that because the batteries are connected by soldered red and black cables.
Sometimes when I reboot my phone, I first see the 3 androids on skateboards and then it goes to a pic of phone with the red exclamation point in a triangle (same as the failed recovery error). I can pull my battery but that does not help. My phone is useless for at least 30-45 minutes. I have pulled my battery up to 20 consecutive times to fix with no avail.
The variables: This is a refurb phone with 2.1 pre-installed. I have tried to root my phone with the whole timing trick, pull card, insert card. This was done a week or two ago. I do not have that file on my card, nor was my rooting successful. I am thinking that my problem is due to the refurb. My dialer lag is way worse than my previous phone. I can make one phone call every hour or so and I can forget calling someone right back if I missed their call. Does the red triangle/exclamation point show an attempt at rooting?
After I use SEUS to update my phone after I pass the Sony Ericsson I get an X10 picture with a yellow at exclamation mark, it doesnt do anything, what can I do, I tried running SEUS and PCCompanion but it says I have the latest software and it does NOT give me the option to fix the current.
I got HTC flyer 3G from my friend as gift....that one was rooted and s-off .when i tried to flash custom rom it showed option like recovery,wipe/factory reset,.
After 2 days,I have installed AVAST Anti theft app and forgot the password for it...so i gave it to reinstall the OS...and it was back to normal...So I thought to put custom rom..and started to boot the device with SD card inside....BUT the recovery didnt show any options as it was shown earlier,the black screen appears with triangle mark with '!' symbol....
The screen shows the following message
FLYER PVT SHIP S-OFF L HBOOT- 6.10.1002 MICROP-0850 RADIO-3809.04.04.2LM eMMC-boot may 4 2011
Is there a way to input the exclamation mark "!" When I'm using the Google pinyin ime on the milestone's hardware keyboard? In fact there shld be plenty of other symbols i cant find on the hardkeyboard, just that i havent realised it yet.
Currently any time i want to input the "!" I have to shut the hardkeyboard and go to the soft keyboard for the symbols menu and this feels semi-******ed...
Just FYI in case anyone wants to know: For download mode, with the phone turned off, fold the number 1 key on the QWERTY keyboard and the power button simultaneously For recovery mode, with the phone turned off, hold Volume Down, CAmera, and Power simultaneously. You navigate with volume UP/DOWN, select with HOME, Menu toggles to "Manual Mode", whatever that it.
I've been attempting to root my Eris, following the sticky at the top of the forum. It has proven to be impossible. I can not get by the USB driver portion of the tutorial. My phone is in debugging mode, but will not show up with an exclamation point no matter what I do, and Windows will not allow me to use the USB driver. I don't know if the tutorial is poorly explained or my phone is broken or corrupted but I've been having problems with it and was hoping the upgrade would fix said problems.
I cannot get into my recovery. Alright so i bricked my AT&T lg optimus g after trying to delete some bloatware after rooting my phone. I unbricked it by using LGNPST and got stock android 4.1.2. My software version is E97020j. The phone works perfectly fine but i cant get into recovery and i want to flash some custom roms. I can root my phone perfectly fine. The only way ive seen that unlocks the bootloader of the optimus g is a program called project freegee. When i try it, it tries to reboot into my recovery and bricks my phone. Then i have to use LGNPST again.
Ive used apps like clockwork mod manager and it says i already have TWRP and Clockworkmod recovery installed but it wont reboot into any of them. It just comes up to a black screen and says "Secure boot error, cause: boot certification verify." Ive tried getting into recovery using adb on my computer and using the old hold power button and up volume button method but nothing has worked. I cant find online how to get my old stock recovery image or how to fix the red triangle and i dont know how to uninstall TWRP and Clockworkmod. The methods for other phones doesnt work on mine.