I downloaded the bootanimation.zip for the droid 2 and all instructions and tips say: If your rooted it's as easy as putting it in the /data/local folder!
Well there is a /data folder on my Nexus and it's empty. If I try to make a new folder it says "cannot create new folder" in File Explorer that came with CM6.1. Astro greys out the create folder button. What am I missing? Also I saw that you can ADB push it. WTF does that mean? I know how to do some fastboot stuff, is it the same? Reboot the phone with the USB connected and run commands on my PC?
I'm using the ROM Manager but I have had this issue too when using the nandroid methods.
When I install just about ANY ROM other than the Cyanogen ROM I have issues with boot looping. Its very odd. If I am running the Cyanogen ROM I have no issues at all. I get the boot loop immediately after loading the ROM. No applications have been installed yet, and I have not even had the chance to do any restores using Titanium Backup.
The latest ROM I attempted was the Steam Dark Edge 1.2. Before that I have tried the Bugless Beast (Prior to 1.0) and with both I have boot loop issues. Also the same with the latest Ultimate Droid and Smoked Glass. So it must be something I'm doing or not doing.
If Im in the ROM manager I choose the option to allow the wipe. I have also booted into the Clockwork Recovery and manually wiped 2 times and attempted the update and again, boot loop.
When I am doing the ROM install from ROM Manager, the phone is running Cyanogen at the latest version. I don't remember ever installing a custom kernel but with all of the ROMS I have messed with over time I may have however that should be cleared with the wipe correct?
When I change ROMs, does this remove the boot animation that I might have changed? I know a wipe is usually involved with a ROM change, but don't know if that will wipe the boot animation. I was going to change one, but will wait until I load a ROM so I don't have to do it twice.
one day when I was playing around with clockword mod and selected restart adbd(I thought it meant the adb daemon but I guess it means something else) in the advanced options area.Well I consider my self pretty tech smart and "advanced" for a 13 year old but I guess things happen. Now when I boot my nexus one the actual boot animation(not splash) is not showing for the first 3 quarters of the boot up. Then I thought I bricked my device because the screen wasn't showing the animation for 20 sec. Then I saw the touch-sensitve buttons light up and then 2 seconds later the animation apeared only for 2 seconds untill my device was booted. I tried overwriting the boot animation in both /system/media/ and in /device/local/ ad it had no effect. I dont know what to do. I am rooted using universal androot because I want to be able to unvoid my warrnaty. So my bootloader isn't unlocked. I am running Cyanogen Mod 6 and am loving it so far! But I am wondering what to do? Should I re-flash the rom? I tried pressing restart adbd again and it did nothing? i have not done a Nandroid restore because it will mess up my apps that are on the sdcard if i restore back. I dont know what to do.
Maybe I missed this and if I did, can you please point me to the right link but just rooted and flashed to the latest ROM and wanted to know how to add the N1 boot animation instead of what is has now.
Just thought I'd show you what I got running on my EVO. I take absolutely no credit for this, just saw a thread somewhere in the incredible forum about a boot animation and did it. Takes no ROOT, just install the SDK and a small amount of knowledge on how to use the ADB tool. Here is a video of it on my EVO.
I pretty much have the custom boot animations figured out... It seems to work whether I put bootanimation.zip in /data/local or /system/media no problem... but the one thing I can't figure out is how to get a sound to play. I've tried every combination I can think of... boot.mp3 in the zip file, android_audio.mp3 in the zip file... tried the zip without the mp3, just placing the mp3 in the same directory as the zip (and also tried both names that way, in both directories stated above). Is there something I'm supposed to add to the desc.txt file? What am I missing? The only info I can find for the Eris is just "put a boot.mp3 in the zip file" which is just not working...
Was wondering if there is anyone out there on this forum that might make me a custom boot animation. I suck at photoshop. I have tried to do it but it looks terrible. The one I want should be simple (I think)for a person who knows what they are doing. All I want is the stock boot animation droid word highlighted in neon green like a lot of blue ones I see where it splashes blue with highlights and the red eye turned the same neon green with my name highlighted neon green like the word droid but name will be above the eye. Kind of like this but with my name from sort of beginning to end.
I have a custom boot animation on my phone that I downloaded and it works but I would like to show it down a little bit. It runs through the animation really fast. If it was a little short it would be great. If I go into the boot animation.zip there are two files. One is a file that just has a few numbers in it the other is a bunch of pictures. Does that number file determine the speed it displays those pictures?
I was wondering if there is an easy way to change the boot animation on my EVO as well as the splash screen. I do realize there is a long way to do it without root, but I am operating from a Mac. If there were some rooted apps that do this, please point me to them.
So prior to manually installing the 2.2 update, I had a custom boot animation with sound. The update ran fine, no issues, and I knew I would have to re-install the custom boot animation files. However, I followed the same steps as I did prior to 2.2 (see below), and again, no errors. After reboot, I'm still seeing the Sprint 4G boot screen. Can anyone else confirm? Looks to me like it's been locked down.
compile a ROM based on CM10; what would make that ROM go into a never-ending boot animation on a clean flash (wipe data/cache/dalvik), yet boot up without a problem when dirty flashed over a CM9 variant. One might think that since a dirty flash over CM9 works, what about dirty flashing over a CM10 variant? What if it acts just like performing a clean flash and never gets past the boot animation?
Lets compound this by adding that once a successful boot-up after the dirty CM9 flash has occured; if one goes into recovery and wipes data/cache/dalvik, the ROM goes back into a never-ending boot animation.
I've found plenty of tutorials on how to get a custom boot animation on my droid. First question, they all say to use the "terminal". Is this just an app? Secondly it asks to copy a file in the systems folder, can i pull this from a nandroid backup? I love the boot animation from smoke themed liq frozen yogurt, just not the ROM itself.
I followed all the instructions on the other really long thread. I am having one issue though. I installed SDK and the drivers, that all went perfect. The only issue I am having is with the actual bootanimation.zip. I am thoroughly stuck. After I download a bootanimation.zip it shows up in winrar with 4 files (loading, eye, android, and the desc.txt) I know it has to go in tools. I am just not sure how? Do I add each folder or is there a way to add them all? I also know the name has to be bootanimation.zip. I tried a few different ways and pushed it to my Inc. But I cant get it to boot with the animation.
So I decided to hijack the "Red Rage" boot animation and use it as the base of my animation. Mine just has some Georgia Bulldog love to it. Also I have modified my boot logo and no longer have the "M" its now a lot nicer. I will include the bootanimation.zip in case anyone wants this. Just place it in the /data/local/ folder. Do not Unzip it, leave it how it is. If you have another one there just rename it with a .bak extension in case you don't like mine. Its stretched a little vertically, not sure why not too noticeable tough. http://www.youtube.com/watch?v=0mAMNbLANnI
I'm new to the droid world but catching on quickly. i have a droid incredible, rooted and updated radio and running sky raider 2.5.2. i am trying to use a custom boot animation from droid boots. i have tried using adb and it puts the file in data/local but the problem i have is it still runs the one in system/media. i bought the root explorer app and followed another guide to pasting over top of original zip in system/media but then i get a message saying the file being pasted is too large and cannot be completed. i reboot and it hasn't changed still says sky raider. i know its a boot animation but i dunno its something for me to play around with.
I've seen the Motorola Droid users doing this, but I'd like my own custom animation for the boot up screen on the Galaxy. Anyone know how you go about that? I tried copying a bootanimation.zip file in there as per the Droid instructions but looks like the Galaxy doesn't use it. Where are the boot up screen/animations stored on the Galaxy?
All of a sudden my girlfriend's Nexus One is rebooting somehow. She fires up her phone, it boots just fine, after a few seconds when everything is loaded, u can scroll thru the menus etc, it seems to reboot, but real fast, the animation comes up, and 2sec later the home screen is visible again. It keeps doing this.
Any ideas? The phone is not rooted, no custom rom, just a few regular apps form the market installed, nothing fancy.
I am trying to create a custom boot animation and I have been following this tutorial ([Ref Tutorial] Changing the boot animation screen on google builds - xda-developers) but I can seem to be able to find the system folder. I am using take5 ROM but when I unzip it its md5 file, not a bunch of folder like the tutorial says.
I am trying to put a custom boot animation on my moto droid 1. I have root I have done it before and I am using froyo. My big problem now is that I tried putting a different one I downloaded on and it worked. So I need someone to tell me whats wrong with the one I made, because I am out of ideas. I have compared size, resolution, ppi, bit depth but for some reason my images are way bigger files. The sequence was created by using virtualdub to clip a section of an animated short, then exporting an image sequence as png.
But I've fed the images through gimp and an image resizer. The frames are only some of them because I went through deleting every other frame a few times to cut down on the total size. The file is too big to attach here so i put it on my web space at: http://www.freaksed.com/stuff/bootanimation.zip I am using the patch that lets me put the files in datalocal and be named bootanimation.zip. it works I've tried with other animations like I said.
I have this animation I made but I'm not that knowledgeable with the desc.txt file. My part0 folder is below could someone please write the desc.txt file, zip it and get it working for me please. I'd like it to stretch the width of the screen and the height doesn't matter. I have it currently at 480x240 and like it there. I've tried a few times but I keep getting the dreaded black screen.
I just installed a custom bootanimation.zip on my phone and it looked like all was well for a moment until the screen went blank 1/3 or so through the animation. The beginning worked properly and the animation began to play, my old startup sound then play(I never changed that) but then the screen went black several seconds after the start sound played.