My LG Ally is stuck at the "VELOCITY" boot screen and is stuck in a loop. I had Velocity 0.3 flashed yesterday and I decided to re-flash today. I have tried wiping data/files/cache/dalvik cache. I'm stuck and I don't know what to do. Also I never did a Nandroid backup (because I'm slow).
Phone got stuck on boot screen due the unseccessfull galaxo update (got foce close, and had no valid backup). Tried to odin 3 diferent firmware (iik5, jc4, jc6), every time odin flash passes bud afrer rebooting the phone loops boot screen.
I'm kind of new to Rooting and ROMs but I keep getting the same problem while installing ROMs using ROM Manager. I flash and then I install the ROM and everything goes well until the boot up screen. It gets stuck in a loop of the Droid and Droid Eye animation (For over 10 minutes) and I have to restore it. Can anyone help me figure out what's wrong? I am using the Droid with Froyo, rooted using Easy Root.
I'm kind of new to Rooting and Roms but I keep getting the same problem while installing Roms using Rom Manager. I flash and then I install the ROM and everything goes well until the boot up screen. It gets stuck in a loop of the Droid and Droid Eye animation and I have to restore it. Can anyone help me figure out what's wrong? I am using the Droid with Froyo, rooted using Easy Root.
I have a customer with a Droid Eris stuck at the boot screen (3 dancing green droid guys) and it wont go past that. I can boot it into Hboot, I've done a factory reset, didn't work. The customer said they deleted all their contacts from the phone, charged it then the next day it was stuck like this.
I tried to load velocity using ROM manager and it would boot, but it got force quit messages repeatedly before I could do anything else so I tried holding volume down, home, and send together and it flashed a screen quickly with the little android guy and a progress bar and then after that it won't go past the android logo. I tried using the LG-utility to flash it but it gives me errors and it wont flash it. What can I do besides run the thing over and get a new phone from insurance?
i cleaned out the cache and everything and i had installed velocity .1, .2 and .3 in the past and i was trying out raptor .1 and everytime i try different roms it will loop over the loading screen.. and it says that its a error mounting the sd card.. it cant mount /dev/block/mmcblk0p2
yesterday I accidentally changed the settings on my ally and I set it so I could see the status of my sent messages. I took it off earlier today because it wasn't what I wanted. Now after 3 messages I have a grey box on my screen that says "Message received by (person's number)" and it doesn't go away unless I turn my phone off and back on again. Then after a few texts, it pops up again and won't go away.
I was flashing back to stock rom and I followed deaths steps for it, and for about the past hour or so its been stuck, once like every 20 minutes the screen will flash and go back to android. Did I brick it or what?
I just flashed Myns Two point Two. I used to Amon RA to wipe the things I needed to wipe and then installed the rom. Little to say that when I booted, it got stuck on the boot screen.I've done a hard reset, booted to the loader, and wipe the data but to no avail.
Been creating a theme last few days. I installed it on my phone, but before doing so i was a good boy and did a nandroid backup. Then i didnt like osme of the things i changed so i restored my backup i just did now its stuck after restoring on the white htc evo screen. NOT GOOD!! I even pulled the battery and SD Card...twice.
Got the WSOD on a non-rooted, stock 2.2 incredible last night. Pulling the battery is the only way to turn it off. Recovery and Factory Reset from hboot manager hang at the htc white screen. Clear Storage also goes straight to the white screen. If turned off it'll charge. SD card is not corrupted. Phone was in close proximity to an iphone 3g for maybe an hour. (We'd been comparing the screens then the iphone was placed on top of the incredible while we ate dinner.) Noticed that phone was at the white screen. Battery was not warm. No signs of external damage. Either this is totally random, or the RF from the iphone managed to fry something.
alright well i was running flyx and decided i wanted to restore to a backup i made on 2.1 pre installing a rom. after the backup began it ran through and ended up at the motorola boot screen. stuck! this is the only recovery i have. now when i boot into recovery i get this message: e:can't open /cache/recovery/command
My Galaxy gio is rooted and is with a clockworkmod recovery. Yesterday, I tried to flash a custom kernel. After flashing successfully (through cwm recovery), i reboot my phone and then it stuck at boot screen.I did many searches but cannot understand any.I can go into recovery and download mode which is i think so required by odin.I wonder if I can flash any stock rom again easily. Need zip file with which i can put in sd card and install zip through cwm recovery by which i can unbrick my phone. I tried wipe data and factory reset but nothing worked.
I restarted my phone because it was freezing and it turned on on the boot screen where it gives me options to Recover, Reboot, etc. The volume button broke a long time ago. It sometimes works to move the option but pushing the power button doesn't do anything. Is there anything I can do to restart my phone avoiding this screen? It goes there every time. Could one of the volume buttons be stuck?
! i was trying to install a new custom ROM ( C.A.M.P ) i had Cyanogenmod 10... i came to where i flash the new rom on my computer then when i wanted to fastboot reboot to install zip on phone, my computer shuts off, now when i turn my phone on it lights up black and stays like this and i cant do anything(no CWM no nothing) so i remove battery to turn off....
My device is rooted, i was installing an app that tweaks performance which needed drivers to be downloaded / installed. As soon as i clicked that driver download / install button the device immediatly shut down. Now i'm stuck on its boot logo (Its a Chinese tablet powered by a RK3066 Chip / android 4.1.1) I tried (Holding power + volume down) = Dead android logo with red exc. mark on top / (Holding power + volume up) = Nothing / (Holding power + both volume up and down) = Dead android logo with red exc. mark on top / (Leaving dead android logo for a couple of minutes) = resets and logo is still stuck.
I have no custom anything . I did not do anything with the root except download apps.
I also do not have linux.
When the tablet is plugged into the PC when the dead android is displaying , it detects, but that is it, i cannot browse it what so ever.
All recovery methods in the tablet are (dead android logo)
Well rooted the i10 tonight fine went to install the play store and got force close on alot of stuff hit the reset button as the tablet forze and it boots but wont go past the impression screen then huts of
So I'm relatively new to rooting. I'm running BB .4, and that went okay. I'm trying to install a theme using ROM Manager. I backup and wipe and it loads into recovery and all that. That runs okay. Then, when it's rebooting, it gets stuck on the DROID screen. Well,actually, it does it once, goes to the Droid eye, and then just repeats the DROID screen over and over. A battery pull allows me to get back into recovery, which lets me restore my back up and then it boots just fine, but I'd really like to make my phone purple. Any ideas?
I rooted my phone and have been using the 3G hotspot and some overclocking apps. Today I decided to load a custom rom. I did some research and bought Rom Manager and Bootstrap. I did the bootstrap and than rebooted to recovery. Than I installed rubix from the sd Card. I found someone else with the problem here and people told them to pull the battery and get into recovery. When I do that I get a droid with an exclamation mark screen. I cant seem to get into recovery or do anything and I am stuck at the rubix boot screen. It seems my problem is because I did not wipe my date or clear cache when installing... but I can't get into recovery to re-do it!
I just rooted my droid to froyo (sapphire) and everything seemed to be going smooth until i rebooted the phone from recovery. The motorola M screen came up and then the sapphire came up. After about ten seconds it goes away and reappears and has been doing this for the past 35 minutes. Is this normal? Any clue on what i need to do to fix this?
So I rooted my desire using the r6 guide from MoDaCo. Worked well, no problems. Recovered my personal data and apps, set my alarm went to sleep. Alarm goes off, get out of bed and all still fine. Then, I decided to apply apps2SD picking up at the end of Lekky's guide. Followed it word for word but once complete, it wont boot past the HTC boot screen (the white screen with logo).
I am going to try and reapply the rooted ROM (if I can get my blackberry to turn on to write to the goldcard). But, does anyone have any idea what could have gone wrong? I really want apps2SD, but this could all go pear-shaped again. Are there any other tried and tested methods to get apps2sd on a stock superuser ROM?
Recently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
I just installed the Android Revolution ROM for my phone, and I am now unable to get past the boot screen. I've been sitting here waiting for it to boot for 1/2 hour, before I took the battery out and tried booting again. Waited 1/2 hour again. Still no progress.
I had just made my phone S-OFF with SuperCID, and had flashed a new radio.img to my phone as recommended in the thread. After doing that, I went and used SuperWipe, and then I installed Android Revolution. Installation encountered no errors, so i was surprised when I was unable to boot.
I can still access 4ext recovery luckily.
EDIT: Wanted to point out that I was able to boot into my old rom after S-OFF, SuperCID and radio.img, but not after installing revolution rom.