HTC Incredible :: USB Device Connect To Computer Does Not Recognized
Oct 28, 2010
How much I love my new refurbished Incredible. The wonderful dust under the screen due to crappy reassembly, and the oh so amazing USB Errors. Seriously, any suggestions why it won't connect to my computer? I wanna bust out my 32 gig SD.
I followed this tutorial exactly: How to Root - Android Forums
1) i downloaded/installed the drivers
2) i unpackaged the rootkit onto the sdcard
3) i executed start_root.bat
4) the script(s) ran and the phone rebooted.
now, when i connect the phone to the computer (any computer) via usb, it isn't recognized. this is the main problem. i also downloaded rom manager, and it says i do not have root.
when i run start_root from the tutorial now:
************************************************** **************************** * * * Dirrk's EZ Root v0.2 (Sebastien Krahmers Exploit) * * * ************************************************** **************************** * * Testing if your device is connected * * daemon not running. starting it now * * daemon started successfully * List of devices attached
* * If you are NOT connected please follow these directions * Install the correct drivers * Turn On Debugging * Check usb port, cable and phone
I want to connect my Behold 2 to my computer (Windows XP) via USB so that I can transfer mp3's. When I plug the USB I get the message "usb device not recognized". Does anybody know how to get past this?
I know a smart phone is only as smart as the user but I can' connect to my computer. I get a message that the software could not be found when I plug into the usb port anyone else have this problem? I did a search on the inc. thread and couldn't come up with anything.
When I connect my phone via USB to my laptop or my desktop using any of the USB ports, my phone blacks out, goes to an Android start graphic, briefly shows the home view then blacks out over and over. It does charge albiet slowly. I turn the phone off so it will charge fully. In addition I get an alert from Windows "USB Device Not Recognized". Works fine when not connected via USB.
Model Number ? Docomo HTC HT-03A Firmware Version ? 1.6 Baseband Version ? 62.50S.20.17H_18.104.22.168I Kernel Version ?2.6.29-00479-g3c7df37 android-build@apa26 #19 Build Number ? DRD08 Carrier ? NTT Docomo Country you are using your phone in ? Japan
Update- Well I got the PC to connect to the phone by updating the HTC sync driver but I still can't use the phone when it is plugged in to the USB. Screen goes dark and none of the buttons function and the charge light is lit.
my moment connects just fine to my pc running xp. same OS on laptop and when i plug in i get a tone, select "mount" on phone. the phone thinks its connected but nothing on laptop (not recognized). device manager says its working properly, could this be affected by admin which i am not? any help is awesome.
I got my DINC rooted last night and got wireless tether working on my computer and my iTouch, so today I went to my sisters house she has a stock DINC, I turned on my wireless tether, turned on her WiFi, it does not find anything but her home WiFi. I tried to manually input my SSID and still nothing.
I've had no really problem and i had the phone since it was brought out..on TMobile in the uk. A couple of months a go i connected the phone to my pc to up load some pics and the windows message came up saying"USB Device Not Recognized".I couldn't get it to connect for weeks, then out of the blue it did.A week ago i got an system update (2.1, if not how do i do this??)through the phone and not it won't connect again?
Have just downloaded the new windows 7 sync for my hero and installed. Pluged phone into usb and nothing, all i get is a windows message saying device drivers could not be installed properley, then usb device not recognized. Have uninstalled and reinstalled software and that hasnt helped. Also when i do plug phone into the usb, absolutely nothing happens on my hero. Please help as i have been waiting ages for the windows 7 sync software to come out as i couldnt get my head round the old work around, and want to start getting the full benifits from my hero.
So all of a sudden my phone will not connect to any computer regardless of what usb cord I use. I get a message that pops up in windows that says "USB Device Not Recognized" yet my phone is charging. I've wiped multiple times and reflashed my rom and still no luck. I've tried uninstalling and reinstalling the USB drivers but it didnt do anything. I really need to be able transfer a ton of files to my sd card from my computer.
That's the error win 7 gives me when I plug in my Hero (cdma, not sprint, running zen-EXP-0.9.6.2 update 2) it won't let me do anything with the phone via the computer. I've tried changing sd cards to no avail, tried changing roms, but the phone wouldn't finish booting with any other rom that I have, (or even a reinstall of the currently used rom) I don't have any previous nandroid backups. (I swear I made them! but they weren't found!) I'm at a loss as to what even happened here unless it was a malicious program.
When I connect my Desire with a USB cable, the PC says "Device not recognised", and the phone keeps searching for a while untill it says it cannot find HTC Sync. No contact is possible, also not as diskdrive. What I have tried to solve this; Downloaded latest version of HTC Sync, gave it a fresh install (firewall and internet connection turned off), rebooted PC, rebooted phone, but to no avail. Also I checked the USB ports in Device manager, and at one port (the one with the Desire connected), it says "unknown device". It looks like no drivers are installed.
I also tried copying the drivers manually to the win32 directory, but this did not help. All this I repeated several times, browsed the web for hours and hours, made a handfull of calls to the friendly people at HTC, but neither of these solved the issue. To complicate matters; the first couple of days Syncing just worked fine, the two weeks after that not anymore. On some occasions, after a complete new installation-session, the device connected once, but not anymore after that. Since the calendar has become the center pillar of my existence, I am on the verge of becoming hugely frustrated. Hoping the truth is out there, and somebody of you guys knows about it..
I am trying to add my motorola milestone device into PC and debug in the device. When i put the usb cable, the device opens in data storage mode and opens the folder. But when i do a "adb devices" i dont see any device. i did the usb_driver fresh installation guide, but it returned "windows could not find a better driver than currently installed" I havd pointed to sdpath/usb_driver what's wrong and how to resolve this?
So my phone was working fine up untill i did the update. now i plug my phone in and it says "USB Device not recognized" clicked on the message and the pic is what it said. its on 2 different computers too. tried un and reinstalling Kies, Drivers, Re-started,
Heres the video too see what it said too. YouTube - Samsung captivate device not recognized
I am using Micromax mobile (Canvas 2 ) for the last 7 months. But for the last 15 days am unable to connect my mobile on my laptop. When i try to connect it it says "The last USB device you connected to this computer malfunctioned, and Windows does not recognize it"... Am really stuck with this issue for the for 20 days .
Yesterday, i installed the Cyanocream rom in my GY, i did not like and i uninstalled, i back for the stock rom with the CWM Backup, my phone says it is charging when it is desconect from the charger and i have problems with the USB conection, the phone does not recognize the USB, on the pc shows: "USB Device Not Recognized" i have the samsung drivers installed in my pc, i want conect the phone USB to restore it with the CWM
I want to root my Samsung Moment so that I can put Live Wallpapers on it and such, but every time I go to DL mode my computer says "USB Device Not Recognized" I have tried with and without USB Debugging on, install uninstall Drivers, going to REGEDIT to erase SAMSUNG drivers, formatting my phone, two different USB cables, three machines, and yet IT-STILL-WONT-WORK. I have tried on XP 64/32 and on 7. I have Eclair.DE03 Kernel 2.6.29 Firware 2.1 -Update1
I've tried different cables including its own cable. Yes, I've installed drivers. Yes, I tried enabling and disabling USB debugging. Yes, I tried cleaning the USB port, both on the computer and the device. Yes, I've connected the device to multiple computers. Yes, I've power cycled both the device and the computer.
The mounting and unmounting of the sd card, I read up and Ordered a class 6 verbatum card. But the big Issue is my windows will not recognize the behold 2. When I hook it up it tells me usb device not recognized then inside it says Windows has stopped this device because it has reported problems. (Code 43) Port_#0006.Hub_#0005. I have tried to install the usb drives I found on this site but it will not allow them to install. I have gone in and deleted My upper and lower system file in the registry.
I have bought a new cable < universal> I did not have the OEM cable and Samsung refused to send me one said it was tmobiles responsibility. I have hooked it up to a Vista 32 bit system and nothing. Also when I hook it too the usb it only shows charging no usb notification on the screen. I seem to remember reading it should have a usb symbol on the upper right corner? I have also already set the system setting to usb mass storage.
So I tried to update my phone from home a few days ago. It didn't work. I got to the Volume Down+Camera+End step and plugged in the USB and it said "USB device not recognized." Something like that. I tried for about an hour, restarting PC, toggling USB debugging, and turning off the phone. After that, I got fed up and deleted the update software from my desktop and told my mom to take me to Sprint next weekend.
My Samsung s3 phone says usb device connected not recognized when i connect to any PC even though other phones similar to mine does connect. i have tried many tricks from different sources but it still doesn't work. when i connect it in the custom mode by starting the phone with pressing Home/power and volume buttons it is recognized and says device ready to use but the moment i swict the phone in normal mode it goes back to not recognized.
So I have a Samsung Vibrant (just got it recently) and I'm having problems when i connect it to the computer. It gives me an USB device not recognized on my windows 8 computer. I have spent all morning searching and reinstalling drivers and trying my old pc and new cables and i found out that my old windows 7 computer with 4GB of ram and an overloaded hard drive will detect my device the problem there is it not my main computer and i don't want to have to connect all the vga cables boot it up connect mouse and ets to use this computer just to be able to copy files, and do other things from my computer to my phone I don't know why my main computer dell inspiron windows 8 will not work when it was a couple of days ago when i had a problem with connectivity and had to flash back to stock but now it wont connect.
Here's a list of things i've tried installing kies installing adb again aoi tool and then drivers a bunch of different drivers found on the forums different usb cable
I have a standalone GPS enabled data recorder in my car that can function as either a USB host or device. (Its a class 0x00h USB device). I currently connect to it via a WM 6.5 app running on my Palm Treo 750. I would like to port my WM 6.5 app to an Android phone. (I don't have a specific Android phone in mind, I would like it to be as generic as possible).Replicating the GUI is not that difficult, but I am having trouble getting started on the USB communication. I'd appreciate it if someone could point me towards an example, or the appropriate tutorial.
Trying to get back to stock on a LG Ally. The whole thing seems easy, Ive done a lot of work on my DX so this is easy, but for w.e reason i cannot get my computer to recognize the phone. I've installed all the drivers from the "How to get back to stock" thread in "all things root" and Ive installed drivers from LG's website. The computer installs them fine but when i open LG Mobile it says "disconnected, please connect phone." Mass storage is turned on, and Ive tried this on multiple computers at work.
When connecting an EVO to a computer are you shown just the information on the SD card or information from the actual phone or Both???? im wanting to be able to view applications that i have downloaded from the android market. There is one app that i have uninstalled but doesn't delete from the download list and i want to see where it is located on the phone that way i can delete it/modify it myself. 2.2 isnt out yet so i know its not gunna be on the sd card.... BTW -- what does everyone think about the Ultra Notes app or TXT PAD LITE app???? what "NOTE" apps do yal use?
I have solved the problem of the phone not connecting to the computer! Just needed to buy a new DCU 100 cable for the darn thing! Big thanks to Toe-cutter who was very patient with both my lack of knowledge and of patience! I'm looking for some help in connecting my Hero to my computer. I haven't has problems until today but now I can't get the darn phone to connect. I have tried my work computer (Windows XP) and my home computer (Vista) and I have also tried four different usb cables, including the HTC one. I have also done a factory reset, taking the battery out and anything else I can think of including reinstalling the drivers & HTC sync If anyone can help I'd appreciate it - I need to be able to sync my phone to my calendar for work. Oh, by the way - I am not in the slightest way technically competent!
I'm trying to share my Internet from my laptop to my Milestone wireless. I've read in here that Android doesn't support ad-hoc, and I don't have a wireless router so that leaves me with blue tooth. So my big Q is: "Can you share your Internet from your computer to a Android-device via blue tooth?
I was wondering if it would be possible to develop the ability for my application to connect to my PC to be able to access the hard drive via USB? I tried searching around for ways to implement this but I can't find anything. Maybe I'm looking for the wrong thing or its just not possible, not sure.
i rooted my phone around a couple weeks ago, and have been trying different types of roms. Today i decided to switch to the fresh2.0d rom and so i placed the zip folder in the root of the sd card. i booted in recovery and selected flash from zip. Once complete, my phone keeps rebooting at the "HTC Quietly brilliant" screen. It does it over and over again. i tried reflashing, taking out the battery and nothing happens. I cant connect to the computer and have no idea what to do.
I'm trying to get my phone to connect to the computer, so I can put music on it. But when I plug it in, all it does is charge. I've already tried to change the USB settings, so that it would pull Mass Storage, and it wouldn't do anything after the fact. The computer has no notification pop up when I plug it in. I'm going nuts here! And I only have two days to do this because I have a long trip ahead and I'm trying to sync music to it.
How to connect my phone via USB cable to my computer. I know you turn off USB debugging option under development. I connect the USB cable that came with my phone to USB on my computer and then to my phone. At the top of my phone it comes up with the notification to mount my card touch on that and them my phone comes up saying to turn off mass storage. Using Windows XP and in explorer can see the SD card showing as a drive in my list however when I click on it it shows nothing.
I can see the notice of the usb drive in the listings showing that I can turn it off, which I do before I disconnect the phone from my computer. Then I try to connect the USB again to my phone and all it does is show its charging the phone now, usually the only way to resolve is either to restart my computer or restart my phone and the problem starts all over again. I am tired of taking the card out of my phone manually to connect it to my computer to move or copy files or anything to my card which is an 8GB sandisk micro sd card.
I have a samsung Captivate, I am trying to root the phone, but whenever i put it in debugging the phone can't connect to my computer (windows 7 x64). I have been trying to find a driver but none of them work, am I really going to have to pay $30.00 for a one time download of a driver or is there another way!?