Every time I try I get a 'boot failed' then 'error at line 390' installation failed, aborted etc. If I try to reboot it just sticks on the HTC incredible screen. I've tried using Rom manager and directly from recovery. Re downloaded files. Maybe related but any kernels I tried stick on the same screen?
I've been struggling to get my Nexus One up and running with the Sense UI. I unlocked the bootloader and rooted it (it all worked as far as I can tell) but whenever I try and flash a new ROM onto the phone I get the error E: no signature E: verification failed I have tried many different ROMs from Cyanogen mod and just a standard Nexus One ROM, but I've had no luck in getting this to work. Plus, when I just return to the original state, my WiFi is out of commission and as an AT&T subscriber (I have two lines so it's not the end of the world), I rely heavily on WiFi for my nexus.
How to unbrick my one s. I can get into recovery but i cant do anything else. I have tried flashing multiple boot images from the bootloader but i get the same failed message every time i try to flash a rom. I dont have s off but i am rooted and supercid.
I rooted my phone using erisuser1's rooting for dummies method - this went off without a hitch, I followed the instructions to the T. I put several custom ROMs on my SD card (using the USB, and properly ejecting the phone as a drive) including KaosFroyo v37 and v38, CELBFroyo 3.6, PlainJaneT2_V2, and Vanilla_Tazz_19.I tried flashing each of them (following the wipe of the system info and the Dalvik cache) and all but the PlainJane got stuck in bootloops that lasted a long time. I waited anywhere from 15 minutes to a few hours, and none of the others ever loaded up. I'm fine using the PlainJane and happy to have the other features of root but am wondering if there's any advice or suggestions as to why none of the other ROMs worked for me?
I have an eris flashed with PB00IMG and I believe I have root access. I am able to remove apps through terminal. I cannot get the google maps to update. I have removed maps.apk, htcnavi.apk and com.google.android.maps.jar. I have removed these separately and all together. I have been able to get it to update before, but I reflashed the PB00IMG because I could not get youtube videos to play without the stock browser. I got the youtube videos working again but cannot remember how to get the maps to update again. I wanted to try flashing different roms. I have downloaded a couple, placed them on the sdcard, and booted but I cannot get them to boot.
I have root access, have clockwork mod. i did a nandroid backup as well. now what is the next step? i downloaded rom manager and titanium backup(paid version) i thought i read somewhere about someone sayin that titanium has to be on the SD card or something for backing up the apps maybe same thing with rom manager? a little confused at this point im just a little bit lost here when it comes to flashing roms. i think i wanna flash capt jagers 1.6 rom but im not sure what else i have to do.
So I downloaded two different ROMs from incredible stuff. You know you want it. And I try to install them with Rom Manager by going to Install ROM form SD Card, selecting the zip. I downloaded, and then checking backup and wipe, but when my phone boots back up, nothing has changed. What is it that I'm doing wrong? I eventually rerooted and that solved my problems. I still have no idea what was wrong.
I want to flash a ROM for the first time but had a couple quick questions. After it is done will my contacts come back? What should I do before I flash a ROM? I already backed up my current rom (sense ui) with the ROM manager app. I have already backed up all my apps as well with titanium backup. I am good to go at this point? I want to try to MiUi rom that just came out.
I have been trying different ROMs for months now via ROM manager. Anyway, I downloaded a ROM to my SD card (I always pick the "download folder") and then go into ROM manager and choose "install from sd card" but I can never see the ROM. For example, last night I DL the red theme for the redemptive ROM. I did not get any error messages. It look to transfer just fine. But I can find the blasted thing! I've tried looking via TB but still nothing. I've also tried via recovery but that did not work either. I have a feeling I am overlooking something stupid and as I said...will feel quite dumb but oh well.
I had a rom i loaded fine on my AMOLED Inc, but since i got a SLCD Inc (the amoled's screen cracked) i cant load this rom for the life of me...but sense ROMs work fine. And i rooted using unrevoked 3.21 , so i a SOFF, rooted, and using Adryn's cracked out clockwork.
So I am new into the world of playing with phones. I come from the computer realm as an engineer for the past 10years or so. So far I have not tried to root or anything but I fully intend to give it a try in the very near future. Anyways the reason behind this post is I am interested in the possibility to dual boot my device. i.e. I want to keep the stock build of 2.1 with sense but I want to be able to still play around with a 2.1 or even 2.2 (hopefully) ROM without losing my stock setup. Is this even possible? I hear a lot of people also saying they switch between ROMs often. Can you do that without losing all of the data that you have loaded on the phone already? If that is the case then switching back and forth between stock and a new ROM takes out the need for the dual boot requirement.
When I change ROMs, does this remove the boot animation that I might have changed? I know a wipe is usually involved with a ROM change, but don't know if that will wipe the boot animation. I was going to change one, but will wait until I load a ROM so I don't have to do it twice.
I ask for some clarification on ROMs, radios, bootloaders and kernals.I am currently running a rooted stock incredible. I want to try CM6, the 2.2 leak, and the 2.2 lite or Sky Raider. I know there are issues with having the right radio and kernal with all these. If I understand it right, the stock kernal will work with all of them. If I wan't to try another kernal I would be limited to kernals made to get along with those specific roms. Is this correct?I have the 1.x radio right now, which will work with CM6 right? If I go to the 2.2 leak it will upgrade it to 2.x, which will work with 2.2 lite or Sky Raider. However I am I right in thinking to go back to CM6 or stock from 2.2 leak I will have to downgrade the radio? Also, I will have to downgrade the bootloader as well?Whew, this is all so confusing.
my SE Xperia Pro .I was flashing it to CM10 , flashed the core but that was the last thing done successfully. Clock work Mod recovery didn't launch , so firmware even didn't started to install. Now by switching it on I just get nice picture "xperia free project" and depressing dark after it. I cant launch recovery, SEUS at the first time stopped working very quickly, the second time said that there is modified software there, and thirdly ,at last, didn't recognize my phone at all. Can i do something with it, excepting using it like a brick?
i have a ZTE (kis lite v790)..I've found ROMs for it but they are from other providers. the signed update.zip checks if your phone is from the right provider and exits if it doesn't match. All the rooting attempts on my phone have failed and if i edit the update.zipMETA-INFcomgoogleandroidupdater-script it fails the signature check.how on earth am i supposed to update my phone?
If you have a 3.29.651.5 build and you flash a custom ROM that says it has a base of 3.30.651.2, does that mean that it will update your phone to that particular base build? Or does it mean you need to have that particular build for it to work on your phone?
Now that I'm fully rooted I'd like to experiment with a few different ROMs. My issue is: I'm a heavy user of Folder Organizer (great product). After I rooted initially, I flashed the Fresh 3.3 ROM after backing up using Titanium, Astro File Mgr, AND MyBackup Pro (I don't mess around). After I was done with the flash, I went to restore with Titanium. It didn't restore all of my apps, and actually not much of my data (for example, it didn't restore SMS for some reason). No worries: I went to my Astro backup, it got a few more of my apps, no data.
Finally, I turned to MyBackup Pro, fortunately it restored my SMS data. To wrap it up, I wound up having to restore a few apps from AppBrain, and I had to reset all the folders in Folder Organizer (a real pain). Is there a can't miss backup/restore process when flashing ROMs with Folder Organizer? I don't mind having to restore a few missed apps, but it takes hours to get the folders back. I'm also paranoid about the missind SMS data, but I think I have that covered.
I am trying to use RSD Lite to SBF to 2.2 OTA but it keeps on giving me the dreaded Failed flashing process. Failed flashing process. (0x7100); phone connected. I am running Windows 7 x64 and have the latest Moto drivers installed (4.7.1) and am running RSD Lite 4.8. I put my phone in bootloader mode and connected my USB. It is showing iup in port 1, but I am also getting a lot of N/A values. Is this normal?
IMEI/ESN/MEID: N / A Technology: N / A Software Version: N / A Flex Version: N / A Bootloader Version: v0x003001 DRM Version: N / A
I choose the SBF file and click start and it immediately gives me that error message. Very frustrating.
I'm trying to update from Villian 5.3 to 10.2. But keep getting E:corrupt file messages and E:verification failed. I followed the tutorial that's how I was able to do 5.3, but don't matter. How many times I download it 10.2 just keeps coming up with the same message when I try to flash it, usual the file it claims is corrupted is different for different downloads, never had this before with any flashing I've done.
I have an Huawei Ascend y210d on which I installed CWM recovery. After that I installed a custom ROM, but now I want to flash its official firmware.But its official firmware is not installing. It got told using Huawei firmware Indian version downloaded from Huawei. I am using this procedure:
(1)First copy dload (in dload folder update.app file is present) folder to the root of the SDcard
(2)Then turn off your device pick out battery then again insert battery
I have been able to flash velocity 0.2 and then decided to upgrade to 0.3. When I did, I looked into flashing the turbo kernel for ally. Followed the instructions as said and now I have the choice to boot to recovery or if I let the boot go all the way through it gets stuck after the verizon logo. When I try to flash a different ROM, I hit install from SD card and everytime, no matter which ROM I pick, it starts updating but says opening file, then like 2 more lines saying opening, then it stops the install.
I have a problem in that every time I flash a ROM, it gets as far as flashing boot and I get the following error:
Writing BOOT:... E:Error finishing BOOT: E:Failure at line 401L write_raw_image PACKAGE:boot.img BOOT: installation aborted. /tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue. ClockworkMod Recovery v184.108.40.206
I get this error every time. The weird thing is, despite getting the error, it still works with the defrost roms and has done with every release since 2.0a up until 2.0f. Any other ROM, MCRs, djdroid etc just result in a boot loop as far as the white HTC screen. I've wiped the dalvik cache and data but it makes no difference.
Imagine my surprise when I went to open a purchased book on my Kindle App, and was told that I had exceeded the max number of devices registered to my Kindle account. Upon further investigation, I found that each time I flashed a new rom, it registered as a new device on my Kindle / Amazon account! This was easily rectified by deregistering all but the "6th Eris Device" and I'm good to go. Just thought I'd share this with those readers here who use the Kindle App - no need to do a small flip-out, like I did.
I'm currently running Froyo after running the RUU: RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00. 32U_5.09.00.20_release_140022_signed.exe as per teppic74's thread over here: Froyo RUU update available
My desire has HBOOT 083 - which I know can be problematic when flashing. My question is: Is the unrEVOked v3.21 method of getting the new recovery menu the best/easiest/most reliable way to enable me to flash new roms on my phone? Are there any caveats? Anything I should be aware of beforehand? According to teppic74's thread, this version of Froyo cannot be rooted at the moment, which I'm not bothered about anyway. But, it would be nice to try some of those lovely new roms.
So I rooted a few days ago using Universal 1 Click Method and flashed Xxtrasense ROM immediately (in step 4 of the instructions below).
Step 1) download and install this APK: http://dl.dropbox.com/u/8699733/erisone010.apk - VERSION 0.1.0 Step 2) Run, read disclaimer, press button Step 3) Reboot, once rebooted your phone should have Amon's recovery. Yay. Step 4) Use the recovery to flash rootme.zip that is now on your SDCard, or the custom rom of your choice. Step 5) Go into settings, and turn usb debugging on. After you have root, please uninstall this app.
I want to try new ROMs and have read through a number of threads but its only confused me more on the next steps. Questions are: 1. Do I need to do a NAND or NAND+ext backup (I've done a NAND back up shortly after flashing the Xtrasense ROM)? 2. Is Titanium Backup the only way to get my Apps and data transferred to any new ROMs I flash? 3. At what point is a dalvik wipe required?
If someone is able to provide a step-by-step outline (similar to jcase's 1-click eris root noted above).
I'm un-rooting my phone using OMJ's guide in the everything root related guide, and I'm getting a "Failed Flashing Process" error in RSD Lite.
I am running as admin, I have the correct drivers (I recently rooted...), I have the sbf in C: .... yet it fails.
The error says " Failed Flashing Process. Failed Flashing Process. Interface BP: Error flashing subscriber unit. Device API Error: 0xE0030009 Command: ADDR (0xE0231009); phone connected"
I am going to try flashing SPRecovery to see if I can at least get to a working point.
SPRecovery worked. It boots into 2.1 and has SPRecovery as the recovery. I still want to get it to stock, so I am going to try and download the stock sbf again (it doesn't have a checksum so I have no way of knowing if it is good or not...) .... here goes nothing!