I want to root phone but when I go through the new user area and follow directions my boot h is 0.98. Can not find out how to root this one. Sorry if I have overlooked it in threads. Can someone point me in right direction?
I've been reading and I've downloaded the ROM Manager from the Marketplace. I've also downloaded a ROM to install. I have tried to boot my phone into recovery mode (pressing X while powering back on) and all I get to is a screen with the exclamation mark and a phone under it.
I rooted my phone using erisuser1's rooting for dummies method - this went off without a hitch, I followed the instructions to the T. I put several custom ROMs on my SD card (using the USB, and properly ejecting the phone as a drive) including KaosFroyo v37 and v38, CELBFroyo 3.6, PlainJaneT2_V2, and Vanilla_Tazz_19.I tried flashing each of them (following the wipe of the system info and the Dalvik cache) and all but the PlainJane got stuck in bootloops that lasted a long time. I waited anywhere from 15 minutes to a few hours, and none of the others ever loaded up. I'm fine using the PlainJane and happy to have the other features of root but am wondering if there's any advice or suggestions as to why none of the other ROMs worked for me?
I was attempting to flash a ROM for the first time. my droid is rooted, I thought I was doing everything right, obviously not. I was using clockwork to flash it. I have titanium backup, and I had it clockwork backed up. It said the flash worked, I tried booting, and got stuck on the "droid" animation, it loops over and over. I booted into recovery mode, cleared data and cache. Now I can occasionally get it through the normal boot animation, all the way past the droid eye, but then it goes back to the "droid animation", only its very glitch, and loops erratically. What should I attempt to do?
I'm running CM7 on my droid and when i run the battery flat, plug it in to charge it. it then boot loops for like 5 mins and works just fine.. also any OC'd kernal suggestions, right now im using one of the chevyno1 kernels but the phone still seems a bit laggy at times what are some good tips to speed this thing up a bit. and how to fix the bootloop issue?
I have tried this on 4 Different Roms (Smoked Glass 4, 5, 6 and Nextheme 0.9) And no matter what I do, if I use a custom sound for notifications, the phone upon restart will boot loop indefinitely, and the only way I can make it stop is to VERY quickly slide the mute left so the phone is muted the next time it boots, then it stops, or if I cant get that to work, I have to restore from a nandroid backup. I have the files on my sd card in /media/audio/notifications All lower case (but have tried with a cap) The only things that hasnt changed, is that I have only tried mp3 files. But I also tried, by using the Zedge Ringtones App to the same effect. Whats the deal? Any Ideas?
Currently running Nextheme 0.9 ESE81 R3 BaseBand C_01.3E.01P
Edit: Also worth note as it may help, its only notifications that causes this issue, custom ringtones and alarms are fine. Even using the same short (8 second) Mp3 as a ringtone causes no issue. And the mp3 plays in the list of notifications when you select it, as it should. The only thing i can think of is possibly that the phones mp3 decoder loads after the boot up sound? Is that even logical?
Tried rooting so I started off flashing r8 of bh_man's 1.6 rom. Went through the setup, odin turned blue to pass and I let the phone run past the android system and then the screen turned off.
Thing about it is that the phone is still being detected by the computer and odin. It's like my phone is on a screen lock but not responding to when I push unlock.
Ive tried every custom rom and each one does the same. I try to go back to stock and most of the time the program closes, when it doesn't I try to flash it and it goes through the process but goes on forever. One time I let the timer go on for 2 hours and it was still on 5/9 completed.
Trying to boot my htc hero, but it's getting stuck on the HERO boot screen and not moving on. Stupidly, having scouted the forums I performed a factory reset which I thought may have fixed the problem. I thought wrong. Has any body else experienced this problem?
I have last night updated my X10i through SE US to Android 2.1. Following from here I cannot get past the boot screen, it switches on, but stays blank and does not do anything else. I have tried to re-install / repair through SE US (PC Companion does not work in this case) to flash it once again, and also that did not help. It keeps telling me that everything is fine, and I should just switch on my mobile phone.
Phone got stuck on boot screen due the unseccessfull galaxo update (got foce close, and had no valid backup). Tried to odin 3 diferent firmware (iik5, jc4, jc6), every time odin flash passes bud afrer rebooting the phone loops boot screen.
My boyfriend just bought a Droid Eris (literally got it maybe a month or so ago) and now, all of the sudden, it's replaying the boot screen over and over again. It goes from the "skateboarder droid" to the Verizon startup then to the HTC logo and keeps replaying that sequence. I've tried holding the volume down and power buttons at the same time and then went to "recovery" but once it gets to the Triangle-Exclamation-Point icon, I don't know what to do. I've also tried to mount it to my Mac via USB and had no luck at all.
I can root a g1 with ease but I sort of got into trouble with the behold. This might sound stupid but do I need to root the phone before I install the port galaxy 1.6? I just did this.
1. download odin here Odin Multi Downloader v4.03.exe 2. download any Of BH_MAN ODIN Ready Rom's 3. download winrar ( google it) to extract the BH_MAN zip file. 4. follow these instruction
Quote: 1. Unzip the zip file. 2. Open Up ODIN Multi Downloader 3. Click the OPS button and choose Behold2_partition.ops 4. Click the PDA button and choose the md5 file, You will get error message" invalid image...," but ignore it. 5. Turn off Phone. 6. Plug phone into USB. 7. Put phone in download mode (Vol Down + OK + END Button) 8. Wait till detected and press START. 9. Enjoy the Port.
And my phone was stuck on the android logo. do I need to root first and where can I find this? Is this where I go. http://androidforums.com/all-things-root-behold-2/22470-persistant-root.html Can I do this method even though my phone is stuck on the android screen? How can I get back to default at least?
I'm kind of new to Rooting and ROMs but I keep getting the same problem while installing ROMs using ROM Manager. I flash and then I install the ROM and everything goes well until the boot up screen. It gets stuck in a loop of the Droid and Droid Eye animation (For over 10 minutes) and I have to restore it. Can anyone help me figure out what's wrong? I am using the Droid with Froyo, rooted using Easy Root.
I did a factory reset on my Eris and went through the setup process. Phone rebooted after being programmed(*228).Got in and started playing around. Downloaded updates for Google Maps and Facebook. I shut my phone off,and now it just hangs at the boot screen. I have tried booting up in recovery mode. All I get is a picture of the eris with a red triangle. Is there anything else I can try before I take it back to Verizon?
I've been running White Widow 4.3 and wanted to try out a new ROM. I've heard so many good things about xtrROM 3.03 that I decided to give it a shot. However, after installing the rom, my phone just sits at the boot screen. I've let it sit there for somewhere around 20 minutes and it just keeps looping the boot screen over and over. Has this ever happened to anyone else before? Or does anyone know what I should do to get this rom going?
I'm kind of new to Rooting and Roms but I keep getting the same problem while installing Roms using Rom Manager. I flash and then I install the ROM and everything goes well until the boot up screen. It gets stuck in a loop of the Droid and Droid Eye animation and I have to restore it. Can anyone help me figure out what's wrong? I am using the Droid with Froyo, rooted using Easy Root.
I have a customer with a Droid Eris stuck at the boot screen (3 dancing green droid guys) and it wont go past that. I can boot it into Hboot, I've done a factory reset, didn't work. The customer said they deleted all their contacts from the phone, charged it then the next day it was stuck like this.
So my Vibrant has been freezing on me and then consequently restarting to the state right after the Galaxy S boot screen, where it shows no signal and searching for media on the SD, etc.
Today it did some really really weird stuff! I was using Google nav and then all of a sudden the screen froze, but it didn't reset or anything. The screen it froze was not good looking either, it looks like it's faded with scan lines.
I attached a picture, sorry for the low quality, but only had a friend's Pre to document it before I had to do a battery pull. But you can see the scan lines on the screen faintly.
So I flashed a boot animation and I want to remove it and us another boot animation that is not flashable and needs root explorer. So how do I remove it? Also, I have AOKP ROM for my nexus 4. I tried to apply another boot animation through the general UI, it shows the animation but it doesnt apply.
I just got my hands on the ever so lovely HTC incredible and flashed it to cricket. However I'm having a few issues with getting my gps, mms, apps and getting my data connection to stop going on and off. I followed the walkthroughs for both the HTC Eris/hero and the Motorola Droid, course respecting the aspects of Motorola that won't work on an HTC. I've gotten the web running with the issue of it periodically goin in and out. As for mms, gps and apps....sadly they're a no go. If anyone has any ideas or can help it would be greatly appreciated.
Is there anybody here with a Froyo Rom flashed on their phone? Flash 10.1 is out in the market and I would love to know how well it works. I have been running Froyo for a couple of days but rolled back this morning. I just can't face going back without good reason.