HTC EVO 4G :: Instead Of Recovery Red Triangle With Exclamation?
Sep 21, 2010
Trying to reboot into recovery, and I get up to the point of my screen going white, saying htc EVO, and instead of recovery, I get a black screen with a picture of an evo, and an red triangle with an exclamation mark? what does this mean?
I don't have a rooted phone. I've been running the IK5 firmware for a while with no problems. I had to travel to the states and put my phone on airplane mode and then decided to shut it off. When I tried to turn it on, it would get to the Samsung "glowing" logo and stay there for awhile. Then the screen would flash and the Samsung logo would appear again. My phone was stuck in a loop after that. It never booted up. I decided to try and reload the firmware and that didn't help. Then I tried recovery mode. That's when I got the infamous triangle with and exclamation point in it. After that nothing. I guess I may have somehow bricked an unrooted phone. Although this isn't my specialty.
I just plugged in my HTC Incredible this morning because it was dead and it went to a black screen with a big triangle with an exclamation point. I tried holding down my lock button, nothing happened. I have nothing backed up, so it would be nice not to have to hard reset.
i have sony ericsson LT29i replica, i got error too many pattern attempts, unable to access internet from handset now i want to reset hard it by pressing volume down + power on, but i am getting just only Yellow triangle with exclamation mark on screen.
I rooted my DINC a while back using Unrevoked 3. When 2.2 became available via OTA, I kept refusing the update, because I wasn't sure if I could update to it from a rooted phone. My wife was using the phone one day when the update notice popped up again, and she proceeded with the update. Sure enough, the update ended up failing, with a red triangle and exclamation point.
After I rebooted the device, I never received another OTA update request. So I tried to unroot the phone, but clockwork seems to stick around. Just an hour ago, I tried to install the official 2.2 ROM (PB31IMG.zip). After applying the image, I get a green triangle, then the same red triangle with an exclamation point. I restarted the device, but now it boots into the white hboot screen, with the following info:
I did the simple root last night and installed the latest version of damage control that rom manager had access to. So after I loaded it onto my phone I tried to run DCupdater. The update downloaded fine, but I found that after it tried installing I would run into a screen that showed a yellow triangle with an exclamation point sign in it with an android next to it. What can I do so that I can update DC?
OK, I used Soup or Root to root the phone. I see that i have root access. I installed Rom Manager. But no matter what rom I try to install, I get the little triangle with an exclamation point with the phone below it. I am sure I am missing something. Help a newbie out? So far I have tried to install bugless beast and cyanogenMod.
Sometimes when I reboot my phone, I first see the 3 androids on skateboards and then it goes to a pic of phone with the red exclamation point in a triangle (same as the failed recovery error). I can pull my battery but that does not help. My phone is useless for at least 30-45 minutes. I have pulled my battery up to 20 consecutive times to fix with no avail.
The variables: This is a refurb phone with 2.1 pre-installed. I have tried to root my phone with the whole timing trick, pull card, insert card. This was done a week or two ago. I do not have that file on my card, nor was my rooting successful. I am thinking that my problem is due to the refurb. My dialer lag is way worse than my previous phone. I can make one phone call every hour or so and I can forget calling someone right back if I missed their call. Does the red triangle/exclamation point show an attempt at rooting?
I was trying to install the latest software via software companion and it was taking well over an hour. So I removed the phone to complete it later. Big mistake. My phone is now disabled and only shows an exclamation mark and triangle. What I have to do to restore it.
My phone works fine. Aside from rooting troubles, it boots up perfectly. Im on hboot 1.47 and want to root so I've been experimenting with it. ANyways, I boot into recovery mode, and all that came up was a picture of an eris with a red exclamation mark on it. What does this mean?
I cannot get into my recovery. Alright so i bricked my AT&T lg optimus g after trying to delete some bloatware after rooting my phone. I unbricked it by using LGNPST and got stock android 4.1.2. My software version is E97020j. The phone works perfectly fine but i cant get into recovery and i want to flash some custom roms. I can root my phone perfectly fine. The only way ive seen that unlocks the bootloader of the optimus g is a program called project freegee. When i try it, it tries to reboot into my recovery and bricks my phone. Then i have to use LGNPST again.
Ive used apps like clockwork mod manager and it says i already have TWRP and Clockworkmod recovery installed but it wont reboot into any of them. It just comes up to a black screen and says "Secure boot error, cause: boot certification verify." Ive tried getting into recovery using adb on my computer and using the old hold power button and up volume button method but nothing has worked. I cant find online how to get my old stock recovery image or how to fix the red triangle and i dont know how to uninstall TWRP and Clockworkmod. The methods for other phones doesnt work on mine.
I have an ICS Tablet Called Xtouch , I bought it yesterday , today , it would get stuck at the blue android logo , and when I press all Buttons + Volume Up , I get into some Asian Text , when I press all buttons and Volume Down , I see a dead Android with his stomach open with a red triangle!
restore it to factory defaults through recovery mode!
I bought this device (Galaxy S2 plus i9105p) few days ago.Yesterday I tried my recovery for a first time. There is a red triangle with a exclamation mark and fallen android guy. I can move in my recovery, but anything wont work. For example if I try to do factory reset and confirm it, everything dissapears but the fallen android guy and red triangle.
The phone and android itself works very well.
Is that normal?
Should I try warranty?
I have stock firmware, stock recovery, no root etc.
I tried to root my Nexus 4, and well I'm not too sure if it is rooted but after unlocking the bootloader and wiping the data, I got it to boot back up and then since then when I turn it off and try and go into recovery mode it has a dead android with a red triangle and says "No command." I can use the phone normally but it just wont let me get into recovery mode.
I have the dead android with the red triangle on the recovery mode, I upgraded to jellybean 4.1.1 but some reason KIES reads my phone as being SGH I 747, so I factory whiped and reset, reinstalled 4.1.1. My original issue was when I wanted to sign into certain apps the phone would vibrate and then the app would crash and I would have to start over or not use the app! I tried to install a correct jellybean 4.1.1 into the phone hoping to fix the issues but I cant do anything, Now there is a dead android with a red triangle no clue what that is! When I tried to install another zip I get verification failed in recovery mode.
I keep getting the email envelope with a exclamation point in my notify bar on the top of the phone. When I open it it says unable to send email even though I never sent one. It says check or verify account. I tried and it dosen't work. I was getting my mail fine and still am but I get that notification different times during the day. Is there a setting I need to adjust. I am using AOL has my default mail and have had no problem except for the notification I described.
Android 2.2 (froyo) is updated for GallxyS 2 days ago. So I just try to make it updated on the webpage to play. whenever I did, it just stopped with play button? or exclamation mark. What I did is following.
In main activity, webview = new Webview(this); webview.loadUrl("file:///android_asset/flash.swf"); webview.getSettings().setPluginsEnagled(true); setCeontentView(webview); and XML file is nothing changed from startup. Did I something wrong for the flash player?
It comes up when sending text messages. Not in the messaging widget, but when you actually go into your text messages, and I think its some, not all. After the message is sent, on the right side of the screen/message, there is this red exclamation point.
I've been attempting to root my Eris, following the sticky at the top of the forum. It has proven to be impossible. I can not get by the USB driver portion of the tutorial. My phone is in debugging mode, but will not show up with an exclamation point no matter what I do, and Windows will not allow me to use the USB driver. I don't know if the tutorial is poorly explained or my phone is broken or corrupted but I've been having problems with it and was hoping the upgrade would fix said problems.
I'm having with my Matrix One tablet. I'm getting an exclamation mark inside of a triangle, inside of a battery icon. The issue started after I let the battery completely die out. I can't get past that screen. When pressing power the battery icon shows up and the tablet shuts down a second later. I tried all button combinations to get into recovery, nothing worked. I've also tried charging the tablet.
There was one thing I managed to do, that was get the tablet to show up on my computer. I held down the update button with a needle and then held the power button until a blue light indicating the tablet was on showed up. The screen was black but my computer detected a new device. My computer didn't find any drivers for the tablet, so I went in search of them myself and couldn't find any. My tablet is A10 compatible, but none of the A10 drivers I found seem to work on my tablet when I go to manually update it through device manager, neither does the PDAnet method I found online.
I was able to find a recovery that works on my device, one that will allow me to reset my tablet, if I'm able to boot into recovery after I get it on my tablet. Now in order to even test the other recovery I need drivers for my device so ADB can detect it and I can push the recovery. My device is already rooted with Superuser updated to the latest build.
I'll add that I've even taken the liberty of opening up the tablet to see if I can disconnect the battery from the board to cut all power, as I'm unable to do that because the batteries are connected by soldered red and black cables.
I think I messed my phone up trying to unroot it. When I hold down the "Home" and "Power" key to bring up the system menu it doesn't come up. What does come up is an exclamation triangle with a little phone underneath. I then have to do a battery pull and start it normally. I can, however, bring up the system wipe by holding down "Home", "Back Key", and "Power". I did the wipe and tried once again to bring up the system menu with no such luck. I've downloaded the Sprint RUU 1.56.6 and installed it onto my phone. It has been since this install that I couldn't access the system menu. Has it deleted it? What do I do?! I just want my phone the way it was when I got it.
My Ally was rooted. I saw that a new update was available, so I unrooted the phone for it. It restarts and then the screen gets an exclamation point with a little Android. I take the battery out to restart it, and it goes back to normal without the update.
i had my phone sitting on my desk. they i noticed the phone was off with the battery caution exclemation point symbol on the screen. my phone a few hours before was fully charged. i plug it in and it is stuck at 13%.
I wanted to see if anybody had some advice on the 1.29-1.56 update. I have tried several times including multiple hard resets to get my device to update. Each time the update downloads successfully but after the phone restarts and shows the progress bar unzipping the package it stops halfway and shows the phone with a triangle and a yellow exclamation point.
After I use SEUS to update my phone after I pass the Sony Ericsson I get an X10 picture with a yellow at exclamation mark, it doesnt do anything, what can I do, I tried running SEUS and PCCompanion but it says I have the latest software and it does NOT give me the option to fix the current.
I been searching to force my phone to roam since purchasing my EVO June 4th. I even returned a Hero at one point because it couldnt force roaming...At that time.(seen a hack recently) I did come across the this post by Technofile over in the XDA forum [6/16]*techknowfile's* - Hack the HTC EVO - 3G w/o Sprint EVDO coverage! - xda-developers
I tried this and although it DID allow me to roam on Verizons Network I still didnt have any bars at work, no triangle and the signal was still low. I believe he had listed this Corolada PRL Page for older PRLS and I also found these PRLS for anyone looking to reverse back to a better Sprint PRL after they updated a more current version http://cid-eabe29f3770d8d15.skydrive.live.com/browse.aspx/.Public/PRLs...........
My eris was having issues (scrolling to the left by itself and not scrolling back, shutting off, force closing everything, etc) so i took it into verizon and even the guy working there got frustrated so he did a factory reset (i think thats what you call it) and once it was FINALLY done he came out and said that my phone still had its problems. Once I learned that verizon no longer has phones like the enV, voyager, etc i just left since mine could still answer phone calls and some stuff on a good day, or so i thought. Once i got home and looked at my phone and it was done loading I noticed there was a triangle above my service bars and my phone has no connection to anything except wi-fi even though it has 2 bars of service. Sorry i'm not very good at explaining, but any help is great. I just want to know how to be able to re-connect it so i can at least make calls or send texts.
I have a weird icon on my HTC Hero that I have never seen before. Above the bars there is a triangle. The Hero manual does not address this icon. It seems to be completely undocumented. Although the manual says that an "R" in this area means your phone is in "roam mode", I believe my phone uses a triangle instead. In any case, my phone says that it is in digital roam mode. I have no idea why it seems to be stuck in this mode. I have rebooted it several times and, each time, it always goes into digital roam mode.